Solid State Relay OCMOS FET PS710E-1A,PS710EL-1A 6-PIN DIP, 0.08 Ω LOW ON-STATE RESISTANCE 2.0 A CONTINUOUS LOAD CURRENT 1-ch Optical Coupled MOS FET −NEPOC Series− DESCRIPTION The PS710E-1A and PS710EL-1A are solid state relays containing a GaAs LED on the input side and MOS FETs on the output side. It is suitable for PLC, etc. because of its large continuous load current and low on-state resistance. The PS710EL-1A has a surface mount type lead. FEATURES • Low on-state resistance (Ron = 0.08 Ω TYP.) • Large continuous load current (IL = 2.0 A) • 1 channel type (1 a output) • Low LED operating current (IF = 2 mA) • Designed for AC/DC switching line changer • Small package (6-pin DIP) • Low offset voltage • PS710EL-1A: Surface mount type APPLICATIONS • Measurement equipment • FA equipment Document No. PN10127EJ01V0DS (1st edition) Date Published April 2002 CP(K) PS710E-1A,PS710EL-1A PACKAGE DIMENSIONS (UNIT: mm) PS710E-1A 9.25±0.5 TOP VIEW 6 5 4 1 2 3 1. LED Anode 2. LED Cathode 3. NC 4. MOS FET Drain 5. MOS FET Source 6. MOS FET Drain 7.62 3.5±0.3 3.3±0.3 4.15±0.3 6.5±0.5 0.5±0.1 1.34±0.1 0.25 M 0 to 15˚ 2.54 PS710EL-1A 9.25±0.5 TOP VIEW 6 5 4 1 2 3 1. LED Anode 2. LED Cathode 3. NC 4. MOS FET Drain 5. MOS FET Source 6. MOS FET Drain 3.5±0.3 0.10+0.10 –0.05 6.5±0.5 1.34±0.1 0.25 M 2 0.9±0.25 2.54 9.60±0.4 Data Sheet PN10127EJ01V0DS PS710E-1A,PS710EL-1A MARKING EXAMPLE No. 1 pin Mark PS710E-1A NE000 Country Assembled Type Number Assembly Lot 0 00 N Week Assembled Year Assembled (Last 1 Digit) In-house Code Rank Code Nothing Solder dipping E Solder plating Data Sheet PN10127EJ01V0DS 3 PS710E-1A,PS710EL-1A ORDERING INFORMATION (Solder Contains Lead) Part Number PS710E-1A Package 6-pin DIP Packing Style Magazine case 50 pcs PS710EL-1A Application Part Number *1 PS710E-1A PS710EL-1A PS710EL-1A-E3 Embossed tape 1 000 pcs/reel PS710EL-1A-E4 *1 For the application of the Safety Standard, following part number should be used. ORDERING INFORMATION (Pb-Free) Part Number PS710E-1A-A Package 6-pin DIP Packing Style Magazine case 50 pcs PS710EL-1A-A PS710EL-1A-E3-A Application Part Number PS710E-1A PS710EL-1A Embossed tape 1 000 pcs/reel PS710EL-1A-E4-A *1 For the application of the Safety Standard, following part number should be used. 4 Data Sheet PN10127EJ01V0DS *1 PS710E-1A,PS710EL-1A ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified) Diode Parameter Symbol Ratings Unit Forward Current (DC) IF 50 mA Reverse Voltage VR 5.0 V PD 50 mW IFP 1 A VL 80 V IL 2.0 A Power Dissipation Peak Forward Current MOS FET *1 Load Voltage Continuous Connection A *2 Load Current Pulse Load Current Connection B 3.0 Connection C 4.0 *3 ILP 4.0 A PD 600 mW BV 1 500 Vr.m.s. Total Power Dissipation PT 650 mW Operating Ambient Temperature TA −40 to +85 °C Storage Temperature Tstg −40 to +100 °C (AC/DC Connection) Power Dissipation Isolation Voltage *4 *1 PW = 100 µs, Duty Cycle = 1% *2 Conditions: IF ≥ 2 mA. The following types of load connections are available. Connection A Connection B Connection C 1 2 3 1 2 3 1 2 3 1 2 3 6 5 4 6 5 IL IL VL (AC/DC) L L + VL (DC) – 4 6 5 4 6 5 IL 4 IL IL L L IL + I L – + VL (DC) + VL (DC) – *3 PW = 100 ms, 1 shot *4 AC voltage for 1 minute at TA = 25°C, RH = 60% between input and output Data Sheet PN10127EJ01V0DS 5 PS710E-1A,PS710EL-1A RECOMMENDED OPERATING CONDITIONS (TA = 25°C) Parameter Symbol MIN. TYP. MAX. Unit LED Operating Current IF 2 10 20 mA LED Off Voltage VF 0 0.5 V ELECTRICAL CHARACTERISTICS (TA = 25°C) Parameter Diode MOS FET Symbol Conditions MIN. TYP. MAX. Unit 1.2 1.4 V Forward Voltage VF IF = 10 mA Reverse Current IR VR = 5 V 5.0 µA Off-state Leakage ILoff VD = 80 V 50 nA Output Capacitance Cout VD = 0 V, f = 1 MHz LED On-state Current IFon IL = 2.0 A On-state Resistance Current Coupled 480 Ron IF = 10 mA, IL = 2.0 A, t ≤ 10 ms *1, 2 ton IF = 10 mA, VO = 5 V, RL = 500 Ω, *1, 2 toff PW ≥ 10 ms Turn-on Time Turn-off Time Isolation Resistance RI-O VI-O = 1.0 kVDC Isolation Capacitance CI-O V = 0 V, f = 1 MHz 10 pF 2.0 mA 0.083 0.15 Ω 1.0 2.0 ms 0.02 0.2 Ω 9 0.5 pF *1 Test Circuit for Switching Time IF Pulse Input VL 50% Input 0 VO = 5 V Input monitor 90% VO monitor Output Rin RL 10% ton toff *2 The turn-on time and turn-off time are specified as input-pulse width ≥ 10 ms. Be aware that when the device operates with an input-pulse width of under 10 ms, the turn-on time and turn-off time will increase. 6 Data Sheet PN10127EJ01V0DS PS710E-1A,PS710EL-1A TYPICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified) MAXIMUM LOAD CURRENT vs. AMBIENT TEMPERATURE MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE 3.0 Maximum Load Current IL (A) Maximum Forward Current IF (mA) 100 80 60 50 40 20 0 –25 0 25 50 75 85 1.0 0.5 0 25 50 75 85 Ambient Temperature TA (˚C) Ambient Temperature TA (˚C) FORWARD VOLTAGE vs. AMBIENT TEMPERATURE OUTPUT CAPACITANCE vs. APPLIED VOLTAGE 100 1.4 1.2 1.0 0 25 50 75 f = 1 MHz Output Capacitance Cout (pF) IF = 50 mA 30 mA 20 mA 10 mA 5 mA 1 mA 500 400 300 200 100 0 100 10 20 30 40 Ambient Temperature TA (˚C) Applied Voltage VD (V) OFF-STATE LEAKAGE CURRENT vs. AMBIENT TEMPERATURE LOAD CURRENT vs. LOAD VOLTAGE –6 3.0 IF = 10 mA VD = 80 V 2.0 10–7 Load Current IL (A) Forward Voltage VF (V) 1.5 600 0.8 –25 Off-state Leakage Current ILoff (A) 2.0 0.0 –25 100 1.6 10 2.5 10–8 10–9 1.0 –0.3 10–10 10–11 0 –0.2 –0.1 0 0.1 0.2 0.3 –1.0 –2.0 20 40 60 80 100 –3.0 Load Voltage VL (V) Ambient Temperature TA (˚C) Data Sheet PN10127EJ01V0DS 7 PS710E-1A,PS710EL-1A NORMALIZED ON-STATE RESISTANCE vs. AMBIENT TEMPERATURE 2.5 n = 50 pcs, IF = 10 mA, IL = 2.0 A, t 10 ms 25 2.0 1.5 1.0 0.5 0.0 –50 20 15 10 5 –25 0 25 50 0 100 75 76 78 80 82 84 Ambient Temperature TA (˚C) On-state Resistance Ron (mΩ) TURN-ON TIME vs. FORWARD CURRENT TURN-OFF TIME vs. FORWARD CURRENT 0.14 15 VO = 5 V, RL = 500 Ω 10 5 VO = 5 V, RL = 500 Ω 0.12 Turn-off Time toff (ms) Turn-on Time ton (ms) 30 Normalized to 1.0 at TA = 25˚C, IF = 10 mA, IL = 2.0 A Number (pcs) Normalized On-state Resistance Ron 3.0 ON-STATE RESISTANCE DISTRIBUTION 0.10 0.08 0.06 0.04 0.02 0 10 30 20 30 TURN-ON TIME DISTRIBUTION TURN-OFF TIME DISTRIBUTION 30 n = 50 pcs, IF = 10 mA, VO = 5 V, RL = 500 Ω 20 15 10 20 15 10 5 5 0.5 0.6 0.7 0.8 0.9 0 0.012 0.014 0.016 0.018 Turn-off Time toff (ms) Turn-on Time ton (ms) Data Sheet PN10127EJ01V0DS 40 n = 50 pcs, IF = 10 mA, VO = 5 V, RL = 500 Ω 25 Number (pcs) Number (pcs) 20 Forward Current IF (mA) 25 8 10 Forward Current IF (mA) 30 0 0 40 0.020 PS710E-1A,PS710EL-1A NORMALIZED TURN-OFF TIME vs. AMBIENT TEMPERATURE NORMALIZED TURN-ON TIME vs. AMBIENT TEMPERATURE 3.0 Normalized to 1.0 at TA = 25˚C, IF = 10 mA, VO = 5 V, RL = 500 Ω 2.5 2.0 1.5 1.0 0.5 0.0 –50 –25 0 25 50 75 100 Normalized Turn-off Time toff Normalized Turn-on Time ton 3.0 Normalized to 1.0 at TA = 25˚C, IF = 10 mA, VO = 5 V, RL = 500 Ω 2.5 2.0 1.5 1.0 0.5 0.0 –50 –25 0 25 50 75 100 Ambient Temperature TA (˚C) Ambient Temperature TA (˚C) Remark The graphs indicate nominal characteristics. Data Sheet PN10127EJ01V0DS 9 PS710E-1A,PS710EL-1A TAPING SPECIFICATIONS (UNIT: mm) 4.5 MAX. 10.3±0.1 7.5±0.1 1.5 +0.1 –0 16.0±0.3 2.0±0.1 4.0±0.1 1.75±0.1 Outline and Dimensions (Tape) 4.0±0.1 10.4±0.1 1.55±0.1 12.0±0.1 0.3 Tape Direction PS710EL-1A-E3 PS710EL-1A-E4 Outline and Dimensions (Reel) 2.0±0.5 φ 21.0±0.8 φ 100±1.0 R 1.0 φ 330±2.0 2.0±0.5 φ 13.0±0.2 17.5±1.0 21.5±1.0 Packing: 1 000 pcs/reel 10 Data Sheet PN10127EJ01V0DS 15.9 to 19.4 Outer edge of flange PS710E-1A,PS710EL-1A RECOMMENDED SOLDERING CONDITIONS (1) Infrared reflow soldering • Peak reflow temperature 260°C or below (package surface temperature) • Time of peak reflow temperature 10 seconds or less • Time of temperature higher than 220°C 60 seconds or less • Time to preheat temperature from 120 to 180°C 120±30 s • Number of reflows Three • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Package Surface Temperature T (˚C) Recommended Temperature Profile of Infrared Reflow (heating) to 10 s 260˚C MAX. 220˚C to 60 s 180˚C 120˚C 120±30 s (preheating) Time (s) (2) Wave soldering • Temperature 260°C or below (molten solder temperature) • Time 10 seconds or less • Preheating conditions 120°C or below (package surface temperature) • Number of times One • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Cautions • Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. Data Sheet PN10127EJ01V0DS 11 4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Concentration Limit per RoHS (values are not yet fixed) Concentration contained in CEL devices -A Not Detected Lead (Pb) < 1000 PPM Mercury < 1000 PPM Not Detected Cadmium < 100 PPM Not Detected Hexavalent Chromium < 1000 PPM Not Detected PBB < 1000 PPM Not Detected PBDE < 1000 PPM Not Detected -AZ (*) If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.