MP15,25,35, S SERIES 15/25/35 AMPS. SILICON BRIDGE RECTIFIERS CHENG- YI ELECTRONIC VOLTAGE RANGE 50 TO 1000 VOLTS PRV CURRENT 15.25.35. Amperes FEATURES The plastic material used carries Underwriters Laboratory flammability recognition 94v-0 Integrally molded heats provide very low thermal resistance for maximum heat dissipation. Universt 4-way terminals; snap-on, wraparound around, solder or P.C.board mounting Surge overload rating to 400 Amperes Terminals solderable per MIL-STD-202, Method 208 Typical Soderable guaranteed: 250oC/10 second/.375" solt Voltage from case to terminal over 2500 volts MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 250C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. MP 15/25/35 S MP005S MP01S MP02S MP04S MP06S MP08S MP10S UNITS 100 200 400 600 800 1000 V Maximum Recurrent Peak Reverse Voltage VRRM 50 Maximum RMS Bridge Input Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V Maximum Average Forward Output Current @ TC=55 C 15 KBPC25S 35 V(AV) 15 25 35 A Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC Mehtod) 15 25 35 IFSM 250 300 400 A VF 11 V 0 7.5A Maximum Forward Voltage 15 KBPC25S at IF 12.5A per Bridge element 17.5A 35 Maximum DC Reverse Current at Rated DC Blocking Voltage per Bridge element IR @ TA=250C @ TA=1000C I2 t Rating for fusing (t<8.3ms) Typical Thermal Resistance(Note.1) Operating Temperature Range Storage Temperature Range I2 t R JC 10 A 500 A 2 374/664 2.0 AS 0 C/W TJ -55 to +125 0 TSTG -55 to +150 0 NOTE: 1.Mounted on a 11.8in2 X 0.06 in thick (300mm2 X 1.5mm thick ) Copper plate. 2.Fast Recovery, Controlled avalanche bridges are available. Please consuit with factory. C C MP15,25,35, S SERIES 15/25/35 AMPS. SILICON BRIDGE RECTIFIERS CHENG- YI ELECTRONIC RATING AND CHARACTERISTICS CURVES MP15,25,35,S SERIES Fig. 4 - MAXIMUM POWER DISPATION 1000 INSTANTANEOUS REVERSE CURRENT, MICROAMPERES 500 100 50 10 5.0 TJ=250C 1.0 Pulse Width-300 s 10% DUTY CYCLS 100 AVERAGE FORWARD CURRENT, (A) Fig. 1 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 50 10 50 1.0 0.1 .8 .6 1.0 1.2 1.4 1.6 1.8 0 5 10 15 20 25 30 35 AVERAGE OUTPUT CURRENT, AMPERES 2.0 Fig. 2 - MAXIMUM OUTPUT RECTIFIED CURRENT AVERAGE FORWARD OUTPUT CURRENT AMPERES KBPC35 KBPC25 Fig. 5 - TYPICAL REVERSE CHARACTERISTICS AT TJ=250C 10 1.0 0.1 .01 KBPC15 0 20 40 80 60 100 120 140 NUMBER OF CYCLES AT 60 Hz 60Hz ResistIVR 40 60 80 100 120 140 160 180 CASE TEMPERATURE, Tc 0C Fig. 3 - MAXIMUM OUTPUT RECTIFIED CURRENT 40 35 60Hz RESISTIVE OR INDUCTIVE LOAD 25 PEAK FORWARD SURGE CURRENT AMPERES KBPC10 20 Fig. 6 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 400 300 200 150 100 50 0 1 10 100 NUMBER OF CYCLES AT 60 Hz Fig. 7 - TYPICAL JUNCTION CAPACITANCE PER BRIDGE ELEMENT 15 10 5.0 25 40 60 80 100 120 140 160 AMBIENT TEMPERATURE, TA 0C 180 CAPACITANCE, pF AVERAGE FORWARD OUTPUT CURRENT AMPERES INSTANTANEOUS FORWARD CURRENT, AMPERES INSTANTANEOUS FORWARD VOLTAGE, (V) 160 50 10 1 4 10 REVERSE VOLTAGE, VOLTS 100