CHONGQING PINGYANG ELECTRONICS CO.,LTD. S1A THRU S1M SURFACE MOUNT SILICON RECTIFIER VOLTAGE：50-1000V CURRENT：1.0A FEATURES SMB(DO-214AA) ·Ideal for surface mounted applications ·Low leakage current ·Glass passivated junction .083(2.11) .075(1.91) .155(3.94) .130(3.30) .185(4.70) .160(4.06) MECHANICAL DATA .012(0.305) .006(0.152) .096(2.44) .084(2.13) ·Case: Molded plastic ·Epoxy: UL94V-0 rate flame retardant ·Terminals: Solder plated,solderable per MIL-STD- 750, Method 2026 ·Polarity: As marked ·Mounting position: Any ·Weight: 0.093 grams .060((1.52) .030(0.76) .008(0.203) .002(0.051) .220(5.59) .200(5.08) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRONICAL CHARACTERISTICS Ratings at 25℃ ambient temperature unless otherwise specified. Single phase, half wave, 60Hz,resistive or inductive load. For capacitive load, derate current by 20%. SYMBOL S1A Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward rectified Current at TA=75°C Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rate load (JEDEC method) Maximum forward Voltage at 1.0A DC Maximum DC Reverse Current at Rated DC Blocking Voltage @ TA=25°C @ TA=125°C VRRM VRMS VDC 50 35 50 S1B S1D S1G S1J S1K S1M units 100 70 100 200 140 200 400 280 400 600 420 600 800 560 800 1000 700 1000 V V V Io 1.0 A IFSM 30 A VF 1.1 V 5.0 µA IR 100 12 30 Typical Thermal Resistance (Note2) RθJL Typical Junction Capacitance (Note1) CJ Notes: 1.Measured at 1MHz and applied reverse voltage of 4.0 volts 2.Thermal Resistance (Junction to Ambient), .0.2×0.2in2 (5×5mm2) copper pads to each terminal １ PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn °C/W pF