CPC1017N 4-Pin SOP OptoMOS® Relays Parameter Blocking Voltage Load Current Max On-resistance LED Current to operate Rating 60 100 16 1 Description Units VP mA Ω mA Features • Designed for use in security systems complying with EN50130-4 • Only 1mA of LED current required to operate • Small 4-Pin SOP Package • TTL/CMOS Compatible input • No Moving Parts • High Reliability • Arc-Free With No Snubbing Circuits • 1500Vrms Input/Output Isolation • No EMI/RFI Generation • Immune to radiated EM fields • SMD Pick & Place, Wave Solderable • Tape & Reel Version Available The CPC1017N is a miniature 1-Form-A (single pole, normally open) solid state relay in a 4-pin SOP package that employs optically coupled MOSFET technology to provide 1500Vrms of input/output isolation. The super-efficient MOSFET switches and photovoltaic die use Clare’s patented OptoMOS architecture. The optically coupled input is controlled by a highly efficient GaAIAs infrared LED. The CPC1017N uses Clare’s state of the art double-molded vertical construction packaging to produce one of the world’s smallest relays. The CPC1017N offers board space savings of at least 20% over the competitor’s larger 4-pin SOP relay. Approvals • UL Recognized Component: File # E76270 • EN/IEC 60950-1 Compliant • CSA Certified Component: Certificate # 1172007 Ordering Information Applications • Security • Passive Infrared Detectors (PIR) • Data Signalling • Sensor Circuitry • Instrumentation • Multiplexers • Data Acquisition • Electronic Switching • I/O Subsystems • Meters (Watt-Hour, Water, Gas) • Medical Equipment—Patient/Equipment Isolation • Aerospace • Industrial Controls Part # CPC1017N CPC1017NTR Description 4-Pin SOP (100/tube) 4-Pin SOP (2000/reel) Pin Configuration + Control – Control 1 4 3 2 Load Load Switching Characteristics of Normally Open (Form A) Devices Control ILOAD + 90% 10%+ tOFF Pb RoHS 2002/95/EC DS-CPC1017N-R05 tON e3 www.clare.com 1 CPC1017N Absolute Maximum Ratings Parameter Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation Total Power Dissipation 1 Isolation Voltage Input to Output Operational Temperature Storage Temperature 1 Ratings 60 5 50 1 70 400 1500 -40 to +85 -40 to +125 Units VP V mA A mW mW Vrms ºC ºC Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Derate Linearly 3.33 mw / ºC Electrical absolute maximum ratings are at 25ºC Electrical Characteristics Parameter Output Characteristics @ 25ºC Load Current Continuous 1 Peak On-Resistance 2 Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics @ 25ºC Input Control Current 3 Input Dropout Current Input Voltage Drop Reverse Input Current Common Characteristics @ 25ºC Capacitance Input to Output 1 2 3 2 Conditions Symbol Min Typ Max Units IF=2mA t=10ms IL=100mA VL=60V IL ILPK RON ILEAK - - 100 350 16 1 mA mA Ω IF=5mA, VL=10V IF=5mA, VL=10V 50V, f=1MHz tON tOFF COUT - 25 10 10 - ms ms pF IL=100mA IF=5mA VR=5V IF IF VF IR 0.3 0.9 - 0.4 1.2 - 1 1.4 10 mA mA V μA - CI/O - 1 - pF μA Load current derates linearly from 100mA @ 25ºC to 80mA @ 80ºC. Measurement taken within 1 second of on time. For applications requiring high temperature operation (greater than 60ºC) an LED drive current of 3mA is recommended. www.clare.com R05 CPC1017N PERFORMANCE DATA* CPC1017N Typical LED Forward Voltage Drop (N=50, TA=25ºC, IF=5mADC) 35 35 20 15 10 5 20 15 10 0 1.19 1.21 1.23 1.25 LED Forward Voltage Drop (V) CPC1017N Typical IF for Switch Dropout (N=50, TA=25ºC, IL=100mA) 25 25 Device Count (N) 20 15 10 5 0.35 0.40 0.45 0.50 0.55 LED Current (mA) Load Current (mA) 30 25 20 15 10 25 15 10 5 1.2 1.3 1.4 1.5 0.26 1.6 0.016 160 0.014 140 0.012 120 100 IF=5mA 80 IF=2mA 60 0.006 -20 0 20 81 79 77 -20 0 20 40 60 Temperature (ºC) 40 60 80 100 0 -40 120 -20 0 80 100 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 IF=5mA IF=2mA -40 -20 0 20 40 60 Temperature (ºC) 80 20 40 60 Temperature (ºC) 80 100 CPC1017N Typical LED Forward Voltage Drop vs. Temperature LED Forward Voltage Drop (V) Turn-Off (ms) 83 0.38 0.008 CPC1017N Typical Turn-Off vs. Temperature (IL=50mA) CPC1017N Typical Blocking Voltage vs. Temperature 85 0.36 0.010 Temperature (ºC) 87 0.34 CPC1017N Typical Load Current vs. Temperature Blocking Voltage (VP) 89 0.32 CPC1017N Typical Leakage vs. Temperature (Measured Across Pins 3 & 4) (VL=60V) -40 91 0.30 Turn-Off (ms) 0.002 -40 0.28 Turn-On (ms) 180 92 0.60 0 1.1 0 90 0.55 5 0 88 0.50 10 0.004 86 0.45 15 20 84 0.40 20 5 82 0.35 CPC1017N Typical Turn-Off Time (N=50, TA=25ºC, IL=100mA, IF=5mA) 40 80 Blocking Voltage (VP) 5 LED Current (mA) CPC1017N Typical Turn-On Time (N=50, TA=25ºC, IL=100mA, IF=5mA) 1.0 CPC1017N Typical Blocking Voltage Distribution (N=50, TA=25ºC) 10 0.30 20 0.60 15 7.4 7.3 0 0.30 35 7.0 7.1 7.2 On-Resistance (Ω) Leakage (μA) 0 20 0 6.9 6.8 Device Count (N) 1.17 Device Count (N) 25 5 0 Device Count (N) Device Count (N) 25 CPC1017N Typical IF for Switch Operation (N=50, TA=25ºC, IL=100mA) 25 30 Device Count (N) Device Count (N) 30 CPC1017N Typical On-Resistance Distribution (N=50, TA=25ºC, IL=100mA) 100 1.8 1.6 1.4 IF=50mA 1.2 IF=10mA IF=5mA 1.0 0.8 -40 -20 0 20 40 60 80 Temperature (ºC) 100 120 *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R05 www.clare.com 3 CPC1017N PERFORMANCE DATA* 14 0.6 12 0.5 0.4 0.3 0.2 45 50 0 10 15 20 25 30 35 40 45 150 Load Current (mA) 2.5 2.0 1.5 1.0 CPC1017N Typical Load Current vs. Load Voltage (TA=25ºC, IF=5mA) 0 -40 -20 0 20 40 60 Temperature (ºC) 80 100 Instantaneous IF=5mA 6 50 0 -50 -150 -1.5 -1.0 -0.5 0 0.5 Load Voltage (V) 1.0 1.5 -20 0 20 40 60 Temperature (ºC) 80 100 CPC1017N Energy Rating Curve 100 -100 0.5 Steady State 8 2 -40 50 LED Forward Current (mA) CPC1017N Typical IF for Switch Operation vs. Temperature (IL=80mA) 3.0 5 Load Current (A) 10 15 20 25 30 35 40 LED Forward Current (mA) IF=5mA 10 4 0 5 CPC1017N Typical On-Resistance vs. Temperature (IL=Max Rated @ Temperature) IF=2mA 0.1 0 LED Current (mA) 0.7 On-Resistance (Ω) 3.0 2.7 2.4 2.1 1.8 1.5 1.2 0.9 0.6 0.3 0 CPC1017N Typical Turn-Off vs. LED Forward Current (IL=100mA) Turn-Off (ms) Turn-On (ms) CPC1017N Typical Turn-On vs. LED Forward Current (IL=100mA) 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 10μs 100μs 1ms 10ms 100ms 1s 10s 100s Time *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com R05 Manufacturing Information Moisture Sensitivity Clare has characterized the moisture reflow sensitivity of this package, and has determined that this component must be handled in accordance with IPC/JEDEC standard J-STD-033 moisture sensitivity level (MSL), level 3 classification. Pb Soldering Reflow Profile For proper assembly, the component must be processed in accordance with the current revision of IPC/JEDEC standard J-STD-020. Failure to follow the recommended guidelines may cause permanent damage to the device resulting in impaired performance and/or a reduced lifetime expectancy. e3 RoHS 2002/95/EC Washing Clare does not recommend ultrasonic cleaning or the use of chlorinated solvents. MECHANICAL DIMENSIONS 4-Pin SOP Package Recommended PCB Land Pattern 4.089 ± 0.203 (0.161 ± 0.008) 0.200 ± 0.025 (0.008 ± 0.001) 6.096 ± 0.102 (0.240 ± 0.004) 3.810 ± 0.076 (0.150 ± 0.003) 0.60 (0.0217) 0.432 ± 0.127 (0.017 ± 0.005) 1.02 ± 0.025 (0.040 ± 0.001) Pin 1 2.54 Typ (0.100 Typ) 5.60 (0.2205) 1.30 (0.0512) 2.54 (0.10) 2.184 Max (0.086 Max) 0.0254 - 0.102 (0.001 - 0.004) Dimensions mm (inches) 0.381 TYP. (0.015 TYP.) Tape and Reel Packaging for 4-Pin SOP Package 330.2 Dia (13.00 Dia) Top Cover Tape Thickness 0.102 Max (0.004 Max) W=12.00 Max (0.472 Max) Pin 1 B0=4.70 (0.185) K0=2.70 (0.106) K1=2.30 (0.091) P=8.00 (0.315) A0=6.50 (0.256) User Direction of Feed Embossed Carrier Embossment Dimensions mm (inches) NOTE: Tape dimensions not shown comply with JEDEC Standard EIA-481-2 For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. 5 Specification: DS-CPC1017N-R05 ©Copyright 2008, Clare, Inc. OptoMOS® is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 9/2/08