PAA191 Dual Single Pole OptoMOS® Relays Blocking Voltage Load Current Max RON PAA191 400 250 8 Description PAA191 is a dual 400V, 250mA, 8Ω 1-Form-A solid state relay. This performance leader provides a high blocking voltage capability and features an enhanced 5000V isolation barrier beween the input and output circuits of the relay. Units V mA Ω Features • 5000VRMS Input/Output Isolation • Small 8 Pin DIP Package • Low Drive Power Requirements (TTL/CMOS Compatible) • No Moving Parts • High Reliability • Arc-Free With No Snubbing Circuits • No EMI/RFI Generation • Machine Insertable, Wave Solderable • Surface Mount and Tape & Reel Versions Available Applications • Telecommunications • Telecom Switching • Tip/Ring Circuits • Modem Switching (Laptop, Notebook, Pocket Size) • Hookswitch • Dial Pulsing • Ground Start • Ringing Injection • Instrumentation • Multiplexers • Data Acquisition • Electronic Switching • I/O Subsystems • Meters (Watt-Hour, Water, Gas) • Medical Equipment-Patient/Equipment Isolation • Security • Aerospace • Industrial Controls Approvals These products comply with the requirements of: • UL recognized: File #E76270 • CSA certified: File #LR43639 • Complies with: • EN 60950 • IEC 950 • AS/NZS 3260 • EN 41003 Ordering Information Part # Description PAA191 PAA191S PAA191STR 8 Pin DIP (50/Tube) 8 Pin Surface Mount (50/Tube) 8 Pin Surface Mount (1000/Reel) Pin Configuration PAA191 Pinout AC/DC Configuration + Control - Switch #1 – Control - Switch #1 + Control - Switch #2 – Control - Switch #2 1 8 2 7 3 6 4 5 Load - Switch #1 Load - Switch #1 Load - Switch #2 Load - Switch #2 Switching Characteristics of Normally Open (Form A) Devices 10ms CONTROL LOAD 10%+ DS-PAA191-R02.0 www.clare.com +90% 10%+ TON TOFF 1 PAA191 Absolute Maximum Ratings (@ 25˚ C) Parameter Min Input Power Dissipation Input Control Current Peak (10ms) Reverse Input Voltage Blocking Voltage Total Power Dissipation Isolation Voltage Input to Output (60 seconds) Operational Temperature Storage Temperature Soldering Temperature 1 Derate Linearly 1.33 mw/˚C 2 Derate Linearly 6.67 mw/˚C Typ Max Units - - 1501 50 1 5 400 8002 -40 -40 - - 5000 VRMS °C +85 +125 °C +260 °C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. mW mA A V V mW Electrical Characteristics Parameter Output Characteristics @ 25°C Load Current* (Continuous) AC/DC Configuration Peak Load Current On-Resistance AC/DC Configuration Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics @ 25°C Input Control Current Input Dropout Current Input Voltage Drop Reverse Input Voltage Reverse Input Current Input to Output Capacitance Conditions Symbol Min Typ Max Units 10ms IL ILPK - - 250 500 mA mA IL=250mA VL=400V RON ILEAK - 6 - 8 1 Ω µA IF=5mA, VL=10V IF=5mA, VL=10V 50V; f=1MHz TON TOFF COUT - 25 3.0 1.0 - ms ms pF IL= 250mA IF= 5mA VR=5V - IF IF VF VR IR CI/O 5 0.2 0.9 - 0.7 1.2 3 50 1.4 5 10 - mA mA V V µA pF *NOTE: If both poles operate simultaneously load current must be derated so as not to exceed the package power dissipation value. 2 www.clare.com R02.0 PAA191 PERFORMANCE DATA* PAA191 Typical On-Resistance Distribution (N=50 Ambient Temperature = 25°C) (Load Current = 250mADC, IF = 5mADC) 35 30 30 25 20 15 10 Device Count (N) 35 30 5 25 20 15 10 1.17 1.19 1.21 1.23 5.03 5.38 5.73 LED Forward Voltage Drop (V) 15 10 6.08 6.43 6.78 430 7.13 20 20 10 5 0 2.7 3.3 3.9 4.5 Device Count (N) 25 Device Count (N) 25 15 15 10 5 1.5 2.1 LED Current (mA) 10 2.7 3.3 3.9 4.5 0.39 0.025 5 0.066 0.078 150 0.090 -40 -20 0 2.50 20 40 60 80 100 120 0 20 40 60 Temperature (°C) 80 100 5mA 1.50 1.00 0 -40 1.95 0.010 -20 0 10mA -20 0 20 40 60 Temperature (°C) 20 40 60 80 100 Temperature (°C) 0.50 -20 1.69 0.015 -40 PAA191 Typical Turn-On vs. Temperature (Load Current = 250mADC) 2.00 Turn-On (ms) Blocking Voltage (VRMS) 485 480 475 470 465 460 455 450 445 -40 1.43 0.020 Temperature (°C) Turn-Off (ms) PAA191 Typical Blocking Voltage vs. Temperature 1.17 0.005 80 100 Turn-Off (ms) 0.054 IF=10mA IF=5mA 200 100 0 0.042 250 Leakage (µA) 300 Load Current (mA) 0.030 20 0.030 0.91 PAA191 Typical Leakage vs. Temperature (Measured across Pins 5 & 6 or 7 & 8) PAA191 Typical Load Current vs. Temperature 350 0.018 0.65 Turn-On (ms) 25 10 502 15 LED Current (mA) 15 490 0 0.9 PAA191 Typical Turn-Off Time (N=50 Ambient Temperature = 25°C) (Load Current = 250mADC; IF = 5mADC) 478 5 0 5.1 466 PAA191 Typical Turn-On Time (N=50 Ambient Temperature = 25°C) (Load Current = 250mADC; IF = 5mADC) PAA191 Typical IF for Switch Dropout (N=50 Ambient Temperature = 25°C) (Load Current = 250mADC) 20 2.1 454 Blocking Voltage (V) 25 1.5 442 On-Resistance (Ω) PAA191 Typical IF for Switch Operation (N=50 Ambient Temperature = 25°C) (Load Current = 250mADC) Device Count (N) 20 0 0 1.25 25 5 5 0 Device Count (N) PAA191 Typical Blocking Voltage Distribution (N=50 Ambient Temperature = 25°C) 35 Device Count (N) Device Count (N) PAA191 Typical LED Forward Voltage Drop (N=50 Ambient Temperature = 25°C; IF = 5mADC) 0.07 0.06 0.05 0.04 0.03 0.02 0.01 0 -40 PAA191 Typical Turn-Off vs. Temperature (Load Current = 250mADC) 5mA -20 0 20 40 60 80 100 Temperature (°C) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R02.0 www.clare.com 3 PAA191 PERFORMANCE DATA* PAA191 Typical Turn-On vs. LED Forward Current (Load Current = 250mADC) 1.6 1.4 50mA 1.2 10mA 5mA 1.0 0.8 -40 -20 0 20 40 60 80 100 120 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 0 5 10 15 20 25 30 35 40 45 50 9 PAA191 Typical IF for Switch Operation vs. Temperature (Load Current = 250mADC) LED Current (mA) On-Resistance (Ω) 10 8 7 6 5 -20 0 20 40 60 80 100 5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 -40 Temperature (°C) 1.2 PAA191 Typical IF for Switch Dropout vs. Temperature (Load Current = 250mADC) 0 20 40 60 80 100 5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 -40 -20 0 20 40 60 80 100 Temperature (°C) PAA191 Energy Rating Curve 1.0 Load Current (A) Load Current (mA) -20 Temperature (°C) PAA191 Typical Load Current vs. Load Voltage (Ambient Temperature = 25°C; IF = 5mADC) 250 200 150 100 50 0 -50 -100 -150 -200 -250 -2.0 -1.5 -1.0 -0.5 5 10 15 20 25 30 35 40 45 50 LED Forward Current (mA) LED Current (mA) PAA191 Typical On-Resistance vs. Temperature (Load Current = 250mADC; IF = 5mA) -40 0.050 0.045 0.040 0.035 0.030 0.025 0.020 0.015 0.010 0.005 0 0 LED Forward Current (mA) Temperature (°C) 4 PAA191 Typical Turn-Off vs. LED Forward Current (Load Current = 250mADC) Turn-Off (ms) 1.8 Turn-On (ms) LED Forward Voltage Drop(V) PAA191 Typical LED Forward Voltage Drop vs. Temperature 0 0.5 1.0 1.5 2.0 Load Voltage (V) 0.8 0.6 0.4 0.2 0 10µs 100µs 1ms 10ms 100ms 1s 10s 100s Time *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com R02.0 PAA191 MECHANICAL DIMENSIONS 8 Pin DIP Through Hole (Standard) PC Board Pattern (Top View) 9.652 ± 0.381 (0.380 ± 0.015) 2.540 ± 0.127 2.540 ± 0.127 7.620 ± 0.254 (0.100 ± 0.005) (0.300 ± 0.010) 3.302 7.620 ± 0.127 6.350 ± 0.127 (0.130) 7.239 TYP. 8-0.800 DIA. (0.100 ± 0.005) (8-0.031 DIA.) 9.144 ± 0.508 6.350 ± 0.127 (0.285 TYP.) (0.300 ± 0.005) (0.250 ± 0.005) (0.360 ± 0.020) (0.250 ± 0.005) 9.144 TYP. 7.620 ± 0.127 (0.360 TYP.) (0.300 ± 0.005) 0.457 ± 0.076 (0.018 ± 0.003) 8.077 ± 0.127 (0.318 ± 0.005 ) 9.652 ± 0.381 8 Pin DIP Surface Mount (“S” Suffix) PC Board Pattern (Top View) 2.540 ± 0.127 (0.380 ± 0.015) (0.100 ± 0.005) 2.540 ± 0.127 7.620 ± 0.254 (0.100 ± 0.005) (0.300 ± 0.010) 4.445 ± 0.127 (0.175 ± 0.005) 3.302 6.350 ± 0.127 (0.130) (0.250 ± 0.005) 9.525 ± 0.254 8.305 ± 0.127 (0.375 ± 0.010) (0.327 ± 0.005) 1.905 ± 0.127 0.635 TYP. (0.025 TYP.) (0.075 ± 0.005) 0.254 TYP. (0.010 TYP.) 0.457 ± 0.076 1.498 ± 0.127 (0.018 ± 0.003) (0.059 ± 0.005) 8.077 ± 0.127 (0.318 ± 0.005) Dimensions mm (inches) R02.0 www.clare.com 5 MECHANICAL DIMENSIONS Tape and Reel Packaging for 8 Pin Surface Mount Package 330.2 DIA. (13.00 DIA.) Top Cover Tape Thickness 0.102 MAX. W = 16.30 max (0.004 MAX.) 1 8 (0.642 max) Bo = 10.30 (0.406) Top Cover Tape Embossed Carrier K = 4.2 Embossment P = 12.00 Ao = 10.30 (0.472) (0.406) User Direction of Feed 1 (0.165) K = 4.90 0 (0.193) NOTE: Tape dimensions not shown, comply with JEDEC Standard EIA-481-2 Dimensions mm (inches) For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-PAA191-R02.0 ©Copyright 2003, Clare, Inc. OptoMOS® is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 6/18/03