OMA160 Single Pole OptoMOS® Relay Parameter Blocking Voltage Rating 250 Units VP Load Current 50 Max On-resistance 100 mA Ω Description The OMA160 is a 250V, 50mA, 100Ω, 1-Form-A relay featuring high speed switching capability. Approvals Features • UL Recognized: File Number E76270 • CSA Certified: File Number LR 43639-10 • EN/IEC 60950-1:2001 Compliant • 100% Solid State • Small 6-Pin Package • Low Drive Power Requirements (TTL/CMOS Compatible) • Arc-Free With No Snubbing Circuits • 3750Vrms Input/Output Isolation • FCC Compatible • VDE Compatible • No EMI/RFI Generation • Machine Insertable, Wave Solderable • Tape & Reel Version Available Ordering Information Applications • Telecommunications • Telecom Switching • Tip/Ring Circuits • Modem Switching (Laptop, Notebook, Pocket Size) • Hook Switch • Dial Pulsing • Ground Start • Ringing Injection • Instrumentation • Multiplexers • Data Acquisition • Electronic Switching • I/O Subsystems • Meters (Watt-Hour, Water, Gas) • Medical Equipment - Patient/Equipment Isolation • Security • Aerospace • Industrial Controls Part Number OMA160 Description 6-Pin DIP (50/Tube) OMA160S 6-Pin Surface Mount (50/Tube) OMA160STR 6-Pin Surface Mount (1000/Reel) Pin Configuration AC/DC Configuration + Control – Control Do Not Use 1 6 2 5 3 4 DC Only Configuration Load + Control Do Not Use Load – Control Do Not Use DS-OMA160-R09 5 3 4 + Load – Load CONTROL + 90% 10%+ 10%+ TON RoHS 6 2 Switching Characteristics of Normally Open (Form A) Devices ILOAD 2002/95/EC 1 TOFF e3 www.clare.com 1 OMA160 Absolute Maximum Ratings Parameter Blocking Voltage Ratings 250 Units VP Reverse Input Voltage 5 V Input Control Current Peak (10ms) 50 mA 1 A 1 150 mW Total Power Dissipation 2 800 mW Input Power Dissipation Isolation Voltage, Input to Output 3750 Vrms Operational Temperature -40 to +85 °C Storage Temperature -40 to +125 °C 1 2 Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Derate Linearly 1.33 mw/˚C Derate Linearly 6.67 mw/˚C Electrical absolute maximum ratings are at 25°C Electrical Characteristics Parameter Output Characteristics @ 25°C Load Current, Continuous AC/DC Configuration DC Configuration Peak Load Current On-Resistance AC/DC Configuration DC Configuration Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics @ 25°C Input Control Current Input Dropout Current Input Voltage Drop Reverse Input Current Common Characteristics @ 25°C Input to Output Capacitance 2 Conditions Symbol Min Typ Max Units - IL - - t=10ms ILPK - - 50 80 100 100 30 25 nA mA mA IL=50mA IL=80mA VL=250V RON - ILEAK - 50 15 - IF=10mA, VL=10V IF=10mA, VL=10V 50V; f=1MHz TON TOFF COUT - - 0.125 ms - 5 - pF IL=50mA IF=10mA VR=5V IF IF VF IR 0.4 0.9 - 1.2 - 10 1.4 10 mA mA V µA - CI/O - 3 - pF www.clare.com Ω R09 OMA160 PERFORMANCE DATA* 35 30 30 25 20 15 10 15 10 0 0 1.21 1.23 1.25 42.5 43.5 44.5 LED Forward Voltage Drop (V) 10 5 2.075 2.525 2.975 3.425 Load Current (mA) Device Count (N) 15 10 5 0.017 0.022 0.027 0.032 0.037 10 5 1.625 2.075 2.525 3.425 385 380 375 0 20 40 60 Temperature (°C) 80 100 402.5 20 15 10 0.05 0.07 100 90 80 70 60 50 40 30 20 10 0 0.09 0.11 0.13 0.15 Turn-On (ms) OMA160 Typical Load Current vs. Temperature OMA160 Typical Leakage vs. Temperature (Measured across Pins 4 & 6) 0.014 0.012 IF=30mA IF=20mA IF=10mA 0.010 0.008 0.006 0.004 0.002 0 -40 -20 0 20 40 60 80 100 120 -40 -20 0 1.00 0.75 0.50 0 IF = 10mA IF = 20mA -40 -20 0 20 40 60 Temperature (°C) 20 40 60 80 100 Temperature (°C) OMA160 Typical Turn-On vs. Temperature (IL = 50mADC) 0.25 370 395.5 0 3.875 Turn-Off (ms) Turn-On (ms) Blocking Voltage (VP) 2.975 1.25 390 388.5 5 1.50 395 381.5 OMA160 Typical Turn-On Time (TA = 25°C; IL = 50mADC; IF = 10mADC) N=50 Temperature (°C) 400 -20 374.5 Blocking Voltage (VP) 15 OMA160 Typical Blocking Voltage vs. Temperature -40 367.5 25 Turn-Off (ms) 365 0 47.5 LED Current (mA) OMA160 Typical Turn-Off Time (TA = 25°C; IL = 50mADC; IF = 10mADC) N=50 0.012 46.5 20 0 3.875 20 0 10 30 LED Current (mA) 25 45.5 Device Count (N) Device Count (N) Device Count (N) 15 1.625 15 OMA160 Typical IF for Switch Dropout (TA = 25°C; IL = 50mADC) N=50 25 20 0 20 On-resistance (Ω) OMA160 Typical IF for Switch Operation (TA = 25°C; IL = 50mADC) N=50 25 25 5 Leakage (µA) 1.19 30 20 5 OMA160 Typical Blocking Voltage Distribution (TA = 25°C) N=50 35 25 5 1.17 OMA160 Typical On-resistance Distribution (TA = 25°C; IL = 50mADC; IF = 10mADC) N=50 Device Count (N) 35 Device Count (N) Device Count (N) OMA160 Typical LED Forward Voltage Drop (TA = 25°C; IF = 10mADC) N=50 80 100 0.050 0.045 0.040 0.035 0.030 0.025 0.020 0.015 0.010 0.005 0 OMA160 Typical Turn-Off vs. Temperature (IL = 50mADC; IF = 10mA) -40 -20 0 20 40 60 80 100 Temperature (°C) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R09 www.clare.com 3 OMA160 OMA160 Typical LED Forward Voltage Drop vs. Temperature 1.8 OMA160 Typical Turn-On vs. LED Forward Current (IL = 50mADC) 0.035 0.14 IF=50mA IF=30mA IF=20mA IF=10mA IF=5mA 1.2 1.0 -40 -20 0 20 40 60 80 100 0.12 Turn-Off (ms) 1.4 0.10 0.08 0.06 0.04 0 120 0 5 10 40 30 20 10 0 20 40 60 80 100 5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 25 30 35 40 45 0.015 50 0 5 10 -40 -20 0 20 40 60 15 20 25 30 35 40 45 50 LED Forward Current (mA) 80 100 5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 OMA160 Typical IF for Switch Dropout vs. Temperature -40 -20 0 20 40 60 80 100 Temperature (°C) Temperature (°C) OMA160 Typical Load Current vs. Load Voltage (TA = 25°C; IF = 10mADC) 0.45 OMA160 Energy Rating Curve 0.40 Load Current (A) Load Current (mA) Temperature (°C) 50 40 30 20 10 0 -10 -20 -30 -40 -50 20 LED Current (mA) LED Current (mA) On-resistance (Ω) 50 -20 15 OMA160 Typical IF for Switch Operation vs. Temperature (IL = 50mADC) OMA160 Typical On-resistance vs. Temperature (IL = 50mADC; IF = mADC) -40 0.025 LED Forward Current (mA) 60 0 0.030 0.020 0.02 Temperature (°C) 70 0.040 0.16 1.6 0.8 OMA160 Typical Turn-Off vs. LED Forward Current (IL = 50mADC) 0.18 Turn-On (ms) LED Forward Voltage Drop (V) PERFORMANCE DATA* 0.35 0.30 0.25 0.20 0.15 0.10 0.05 -3 -2 -1 0 1 Load Voltage (V) 2 3 0 10µs 100µs 1ms 10ms 100ms 1s 10s 100s Time *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com R09 OMA160 Manufacturing Information Soldering For proper assembly, the component must be processed in accordance with the current revision of IPC/JEDEC standard J-STD-020. Failure to follow the recommended guidelines may cause permanent damage to the device resulting in impaired performance and/or a reduced lifetime expectancy. Washing Clare does not recommend ultrasonic cleaning or the use of chlorinated solvents. e3 RoHS 2002/95/EC Recommended soldering processes are limited to 260ºC component body temperature for 10 seconds. MECHANICAL DIMENSIONS 6-Pin DIP Through Hole (Standard) 3.302 ± 0.051 (0.130 ± 0.002) 7.239 TYP (0.285 TYP) 0.254 TYP (0.010 TYP) 2.540 ± 0.127 6-0.800 DIA. (0.100 ± 0.005) (6-0.031 DIA.) 6.350 ± 0.127 (0.250 ± 0.005) 6-Pin Surface Mount (“S” Suffix) 8.382 ± 0.381 (0.330 ± 0.015) 7.620 ± 0.254 (0.300 ± 0.010) 5.080 ± 0.127 (0.200 ± 0.005) PC Board Pattern (Top View) 2.540 ± 0.127 2.540 ± 0.127 (0.100 ± 0.005) (0.100 ± 0.005) 9.525 ± 0.254 (0.375 ± 0.010) 4.445 ± 0.127 (0.175 ± 0.005) 0.254 ± 0.0127 (0.010 ± 0.0005) 7.620 ± 0.127 (0.300 ± 0.005) 6.350 ± 0.127 (0.250 ± 0.005) 2.540 ± 0.127 (0.100 ± 0.005) 9.144 ± 0.508 (0.360 ± 0.020) 3.302 ± 0.051 (0.130 ± 0.002) PC Board Pattern (Top View) 8.382 ± 0.381 (0.330 ± 0.015) 7.620 ± 0.254 (0.300 ± 0.010) 8.305 ± 0.127 (0.327 ± 0.005) 6.350 ± 0.127 (0.250 ± 0.005) 0.635 ± 0.127 (0.025 ± 0.005) 1.905 ± 0.127 (0.075 ± 0.005) 0.457 ± 0.076 (0.018 ± 0.003) 1.499 ± 0.127 (0.059 ± 0.005) Tape and Reel Packaging for Surface Mount Package 330.2 DIA. (13.00 DIA.) Top Cover Tape Thickness 0.102 MAX. (0.004 MAX.) 1 6 W = 16.30 MAX (0.642 MAX) B0 = 10.10 (0.398) Top Cover Tape Embossment Carrier Embossment K0 = 4.90 (0.193) P = 12.00 (0.472) K1 = 3.80 (0.150) User Direction of Feed A0 = 10.10 (0.398) Dimensions: mm (inches) For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. 5 Specification: DS-OMA160-R09 ©Copyright 2006, Clare, Inc. All rights reserved. Printed in USA. 10/23/06