THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. WWW.CONWIN.COM PRODUCT D AT A SHEET CRYSTAL CONTROLLED OSCILLATORS CW 0629 FPLD64TEG5 155.52M SURFACE MOUNT 3.3V LVPECL CLOCK FPLD64TEG5 ABSOLU TE MAX IMUM RATING S TABLE 1.0 PARAMETER UNITS Storage Temperature Supply Voltage (Vcc) MINIMUM NOMINAL MAXIMUM UNITS -55 - 125 °C NOTE -0.5 - 7.0 Vdc MINIMUM NOMINAL MAXIMUM UNITS NOTE 16.384 -20 -4 - MHz ppm °C 1 - 200 20 85 Vdc DESCRIPTION OPERATING SPECIFIC ATIONS TABLE 2.0 PARAMETER Center Frequency Total Frequency Tolerance Operating Temperature Range (Fo) Supply Voltage (Vcc) 3.135 3.3 3.465 Supply Current (Icc) - - 60 mA Jitter (BW=10Hz to 20MHz) - - 5 pS RMS Jitter (BW=12kHz to 20MHz) - - 1 pS RMS MINIMUM NOMINAL MAXIMUM UNITS NOTE - Vdc 2 1.68 Vdc 2 MAXIMUM 50 1.68 55 1 UNITS Ohms Vdc Vdc % nS INPUT CHARACTERISTICS TABLE 3.0 PARAMETER Disable Input Voltage (High) (Vih) 2.275 Enable Input Voltage (Low) (Vil) - - MINIMUM 2.275 45 - NOMINAL 50 - LVPECL OUTPUT CHARACTERISTICS PARAMETER LOAD Voltage (High) (Low) Duty Cycle Rise / Fall Time 20% to 80% (Voh) (Vol) PACKAG E CHARACTERISTICS TABLE 4.0 NOTE 3 4 PROCESS RECOMMENDATIONS TABLE 6.0 Soldering Process Wash FEATURES 3.3V OPERATION LOW JITTER <1pS RMS OVERALL FREQUENCY TOLERANCE: ±20ppm TABLE 5.0 Non-hermetic package consisting of an FR4 substrate with grounded metal cover. Package The Connor-Winfield FPLD64TEG5 is a fixed frequency, surface mount Crystal Controlled Oscillator (XO) designed for applications requiring low jitter and a ±20ppm overall frequency tolerance. Operating at 3.3V supply voltage, the FPLD64TEG5 provides LVPECL Differential Outputs with a Enable/Disable function. See solder profile page 2. Ultrasonic cleaning is not recommended. TEMPERATURE RANGE: -40 to 85°C LVPECL DIFFERENTIAL OUTPUTS ENABLE / DISABLE FUNCTION SURFACE MOUNT PACKAGE Notes 1) Includes initial tolerance, deviation over temperature, supply and load variations, shock, vibration and 20 years aging. 2) When the oscillator is disabled, the true output is in a low state (Vol) and the complementary output is in the high state (VoH). 3) Output must be terminated into 50 ohms to Vcc – 2V or Thevenin equivalent. 4) Duty Cycle measured at 1.977V TAPE AND REEL PACKAGING RoHS 5/6 COMPLIANT ORDERING INFORMATION FPLD64TEG5 CLOCK SERIES 155.52MHz CENTER FREQUENCY Specifications subject to change without notice. DATA SHEET #: Ec241 PAGE 1 OF 2 REV: 00 DATE: 07/19/06 aCopyright 2001 Connor-Winfield all rights reserved. THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. WWW.CONWIN.COM PRODUCT D AT A SHEET CRYSTAL CONTROLLED OSCILLATORS Package Outline CW FPLD64TEG5 155.52M Suggested Pad Layout Dimensional Tolerance: ±.005” (.127mm) Reflow Profile Pin Connections Pin 1 2 3 4 5 6 TABLE 7.0 Connection Enable / Disable N/C Ground Q Output Q Output Vcc Output Waveform Test Curcuit 80% 50% 2 20% E/D N/C Specifications subject to change without notice. DATA SHEET #: Ec241 PAGE 2 OF 2 REV: 00 DATE: 07/19/06 aCopyright 2001 Connor-Winfield all rights reserved.