THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 581-5040. PHONE (630) 851-4722. www.conwin.com PRODUCT D ATA SHEET CRYSTAL CONTROLLED OSCILLATORS ABSOLUTE MAXIMUM RATINGS PARAMETER TABLE 1.0 UNITS MINIMUM NOMINAL -40 - 85 °C (Vcc) -0.5 - 7.0 Vdc Storage Temperature Supply Voltage MAXIMUM UNITS OPERATING SPECIFICATIONS NOTE CW 0701 FPLD52TE 155.52M SURFACE MOUNT 3.3V LVPECL CLOCK FPLD52TE DESCRIPTION TABLE 2.0 PARAMETER MINIMUM NOMINAL MAXIMUM UNITS NOTE 16.384 -50 0 - MHz ppm °C 1 - 200 50 70 (Vcc) 3.135 3.3 3.465 Vdc (Icc) - - 60 mA Jitter (BW=10Hz to 20MHz) - - 5 pS RMS Jitter (BW=12kHz to 20MHz) - - 1 pS RMS NOMINAL MAXIMUM - UNITS NOTE Vdc 2 1.68 Vdc 2 MAXIMUM 50 1.68 55 1 UNITS Ohms Vdc Vdc % nS Center Frequency Total Frequency Tolerance Operating Temperature Range (Fo) Supply Voltage Supply Current INPUT CHARACTERISTICS TABLE 3.0 PARAMETER Disable Input Voltage (High) (Vih) MINIMUM 2.275 Enable Input Voltage (Low) (Vil) - - (Voh) (Vol) MINIMUM 2.275 45 - NOMINAL 50 - PECL OUTPUT CHARACTERISTICS The Connor-Winfield FPLD52TE is a fixed frequency, surface mount Crystal Controlled Oscillator (XO) designed for applications requiring low jitter and a ±50ppm overall stability. Operating at 3.3V supply voltage, the FPLD52TE provides LVPECL Differential Outputs with Enable/Disable function. TABLE 4.0 PARAMETER LOAD Voltage (High) (Low) Duty Cycle Rise / Fall Time 20% to 80% NOTE 3 FEATURES 3.3V OPERATION 4 LVPECL DIFFERENTIAL OUTPUTS ENABLE / DISABLE FUNCTION PACKAGE CHARACTERISTICS Package PROCESS RECOMMENDATIONS Solder Reflow Wash TABLE 5.0 Non-hermetic package consisting of an FR4 subst rate with grounded metal cover. TABLE 6.0 The component solder used internal to this device has a melting poi nt of 221°C. The peak temperature inside the device should be less than or equal to 220°C for a maximum of 10 seconds Ultrasonic cleaning is not recommended. Notes 1) Includes initial tolerance, deviation over temperature, supply and load variations, shock, vibration and 20 years aging. 2) When the oscillator is disabled, the true output is in a low state (Vol) and the complementary output is in the high state (VoH). 3) Output must be terminated into 50 ohms to Vcc – 2V or Thevenin equivalent. 4) Duty Cycle measured at 1.977V LOW JITTER <1pS RMS OVERALL FREQUENCY TOLERANCE: ±50ppm TEMPERATURE RANGE: 0 to 70°C SURFACE MOUNT PACKAGE TAPE AND REEL PACKAGING ORDERING INFORMATION FPLD52TE - 155.52MHz CLOCK SERIES CENTER FREQUENCY Specifications subject to change without notice. DATA SHEET #: Ec166 PAGE 1 OF 2 REV: 00 DATE: 8/23/02 aCopyright 2001 Connor-Winfield all rights reserved. THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 581-5040. PHONE (630) 851-4722. www.conwin.com PRODUCT D ATA SHEET CRYSTAL CONTROLLED OSCILLATORS CW FPLD52TE 155.52M ENABLE / DISABLE N/C GROUND Q OUTPUT Q OUTPUT Vcc Dimensional Tolerance: ±.005” (.127mm) 80% 50% 20% 2 N/C Specifications subject to change without notice. DATA SHEET #: Ec166 PAGE 2 OF 2 REV: 00 DATE: 8/23/02 aCopyright 2001 Connor-Winfield all rights reserved.