THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040 PHONE (630) 851-4722 WWW.CONWIN.COM PRODUCT D ATA SHEET CW 0723 FPLD64TB 155.52M CRYSTAL CONTROLLED OSCILLATORS 3.3V SURFACE MOUNT LVPECL CLOCK FPLD64TB ABSOLUTE MAXIMUM RATINGS PARAMETER TABLE 1.0 UNITS MINIMUM NOMINAL MAXIMUM UNITS -40 - 85 °C -0.5 - 7.0 Vdc Storage Temperature Supply Voltage (Vcc) OPERATING SPECIFICATIONS NOTE DESCRIPTION TABLE 2.0 PARAMETER MINIMUM NOMINAL MAXIMUM UNITS NOTE 16.384 -20 -40 - MHz ppm °C 1 - 200 20 85 (Vcc) 3.135 3.3 3.465 Vdc (Icc) - - 60 mA Jitter (BW=10Hz to 20MHz) - - 5 pS RMS Jitter (BW=12kHz to 20MHz) - - 1 pS RMS MINIMUM NOMINAL MAXIMUM UNITS NOTE - - Vdc 2 1.68 Vdc 2 Center Frequency Total Frequency Tolerance Operating Temperature Range (Fo) Supply Voltage Supply Current INPUT CHARACTERISTICS The Connor-Winfield FPLD64TB is a fixed frequency, surface mount Crystal Controlled Oscillator (XO) designed for applications requiring low jitter and a ±20ppm overall stability. Operating at 3.3V supply voltage, the FPLD64TB provides LVPECL Differential Outputs with a Enable/Disable function. TABLE 3.0 PARAMETER Disable Input Voltage (High) (Vih) 2.275 Enable Input Voltage (Low) (Vil) - LVPECL OUTPUT CHARACTERISTICS PARAMETER LOAD Voltage (High) (Low) Duty Cycle TABLE 4.0 MINIMUM 2.275 45 NOMINAL 50 MAXIMUM 50 1.68 55 UNITS Ohms Vdc Vdc % Rise / Fall Time 20% to 80% - - 1 ns Start-up Time - - 10 ms (Voh) (Vol) NOTE 3 FEATURES 3.3V OPERATION LVPECL DIFFERENTIAL OUTPUTS ENABLE / DISABLE FUNCTION PAD 2 4 LOW JITTER <1pS RMS OVERALL FREQUENCY TOLERANCE: ±20ppm TEMPERATURE RANGE: -40 to 85°C PACKAGE CHARACTERISTICS Package TABLE 5.0 Non-hermetic package consisting of an FR4 substrate with grounded metal cover. SURFACE MOUNT PACKAGE TAPE AND REEL PACKAGING PROCESS RECOMMENDATIONS TABLE 6.0 Solder Reflow Wash RoHS COMPLIANT / LEAD FREE See solder profile on page 2. Ultrasonic cleaning is not recommended. Notes 1) Includes initial tolerance, deviation over temperature, supply and load variations, shock, vibration and 20 years aging. 2) When the oscillator is disabled, the true output is in a low state (Vol) and the complementary output is in the high state (VoH). 3) Output must be terminated into 50 ohms to Vcc – 2V or Thevenin equivalent. 4) Duty Cycle measured at 1.977V DATA SHEET #: Ec250 PAGE 1 OF 2 REV: 00 DATE: 06/13/07 ORDERING INFORMATION FPLD64TB -155.52M LVPECL CLOCK SERIES CENTER FREQUENCY Specifications subject to change without notice. aCopyright 2007 Connor-Winfield all rights reserved. THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040 PHONE (630) 851-4722 WWW.CONWIN.COM PRODUCT D ATA SHEET CRYSTAL CONTROLLED OSCILLATORS Package Outline Pin Connections CW FPLD64TB 155.52M N/C ENABLE / DISABLE GROUND Q OUTPUT Q OUTPUT Vcc Dimensional Tolerance: ±.005” (.127mm) Suggested Pad Layout Output Waveform 80% 50% 20% Test Circuit Solder Profile Temperature 260°C 260°C 220°C 180°C 150°C 120°C 2 N/C 0 E/D 120 S Max. Vcc = Vcc2 = 3.3Vdc DATA SHEET #: Ec250 PAGE 2 OF 2 REV: 00 DATE: 06/14/07 Time 10 S 60 S Max. 360 Sec. Max. Specifications subject to change without notice. aCopyright 2007 Connor-Winfield all rights reserved.