THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722 WWW.CONWIN.COM PRODUCT D ATA SHEET CW 0729 FPLD52TBG5 155.52M CRYSTAL CONTROLLED OSCILLATORS 3.3V SURFACE MOUNT LVPECL CLOCK FPLD52TBG5 ABSOLUTE M AXIMUM RATING S PARAMETER TABLE 1.0 UNITS MINIMUM NOMINAL MAXIMUM UNITS -40 - 85 °C -0.5 - 7.0 Vdc Storage Temperature Supply Voltage (Vcc) OPERATING SPECIFIC ATIONS NOTE DESCRIPTION TABLE 2.0 PARAMETER MINIMUM NOMINAL MAXIMUM UNITS NOTE 16.384 -50 0 - MHz ppm °C 1 - 400 50 70 (Vcc) 3.135 3.3 3.465 Vdc (Icc) - - 60 mA Jitter (BW=10Hz to 20MHz) - - 5 ps RMS Jitter (BW=12kHz to 20MHz) - - 1 ps RMS MINIMUM NOMINAL MAXIMUM UNITS NOTE - - Vdc 2 1.68 Vdc 2 Center Frequency Total Frequency Tolerance Operating Temperature Range (Fo) Supply Voltage Supply Current INPUT CHARACTERISTICS TABLE 3.0 PARAMETER Disable Input Voltage (High) (Vih) 2.275 Enable Input Voltage (Low) (Vil) - The Connor-Winfield FPLD52TBG5 is a fixed frequency, surface mount Crystal Controlled Oscillator (XO) designed for applications requiring low jitter and a ±50ppm overall stability. Operating at 3.3V supply voltage, the FPLD52TBG5 provides LVPECL Differential Outputs with Enable/Disable function. FEATURES 3.3V OPERATION LVPECL OUTPUT CHARACTERISTICS PARAMETER LOAD Voltage (High) (Low) Duty Cycle TABLE 4.0 MINIMUM 2.275 45 NOMINAL 50 Rise / Fall Time 20% to 80% - - 1 ns Start-up Time - - 10 ms (Voh) (Vol) MAXIMUM 50 1.68 55 UNITS Ohms Vdc Vdc % NOTE 3 4 LVPECL DIFFERENTIAL OUTPUTS ENABLE / DISABLE FUNCTION PAD 2 LOW JITTER <1pS RMS OVERALL FREQUENCY TOLERANCE: ±50ppm TEMPERATURE RANGE: 0 to 70°C PACKAG E CHARACTERISTICS Package TABLE 5.0 Non-hermetic package consisting of an FR4 substrate with grounded metal cover. PROCESS RECOMMENDATIONS TABLE 6.0 Soldering Process Wash See solder profile page 2. Ultrasonic cleaning is not recommended. Notes 1) Includes initial tolerance, deviation over temperature, supply and load variations, shock, vibration and 20 years aging. 2) When the oscillator is disabled, the true output is in a low state (Vol) and the complementary output is in the high state (VoH). 3) Output must be terminated into 50 ohms to Vcc – 2V or Thevenin equivalent. 4) Duty Cycle measured at 1.977V. DATA SHEET #: Ec238 PAGE 1 OF 2 REV: 01 DATE: 07/27/06 SURFACE MOUNT PACKAGE TAPE AND REEL PACKAGING RoHS 5/6 COMPLIANT ORDERING INFORMATION FPLD52TBG5 -155.52MHz LVPECL CLOCK SERIES CENTER FREQUENCY Specifications subject to change without notice. aCopyright 2001 Connor-Winfield all rights reserved. THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722 WWW.CONWIN.COM PRODUCT D ATA SHEET CRYSTAL CONTROLLED OSCILLATORS Package Outline Pin Connections CW FPLD52TBG5 155.52M N/C ENABLE / DISABLE GROUND Q OUTPUT Q OUTPUT Vcc Dimensional Tolerance: ±.005” (.127mm) Suggested Pad Layout Output Waveform 80% 50% 20% Test Circuit Solder Profile Temperature 225°C Ramp-Up Rate 3°C/second max. from 150°C to 225°C. 225°C tp Ramp-Down Rate 6°C/second max. 183°C 150°C 100°C 2 25°C N/C E/D 0 Time 60-120s Max. 10-30s 60-150s Max. 360 Sec. Max. DATA SHEET #: Ec238 PAGE 2 OF 2 REV: 01 DATE: 07/27/06 Specifications subject to change without notice. aCopyright 2001 Connor-Winfield all rights reserved.