THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. WWW.CONWIN.COM PRODUCT D AT A SHEET CRYSTAL CONTROLLED OSCILLATORS CW P731 704.38058M 0628 3.3V 5 x 7mm SURFACE MOUNT HIGH FREQUENCY LVPECL CLOCK OSCILLATOR P731 ABSOLU TE MAX IMUM RATING S TABLE 1.0 PARAMETER UNITS Storage Temperature MINIMUM NOMINAL MAXIMUM UNITS -40 - 85 °C NOTE DESCRIPTION Supply Voltage (Vcc) -0.5 - 4.6 Vdc Input Voltage (Vcc) -0.5 - 4.6 Vdc MINIMUM 250 -50 0 NOMINAL - MAXIMUM 800 50 85 UNITS MHz ppm °C Vdc OPERATING SPECIFIC ATIONS TABLE 2.0 PARAMETER Center Frequency Total Frequency Tolerance Operating Temperature Range (Fo) NOTE 1 Supply Voltage (Vcc) 3.135 3.3 3.465 Supply Current (Icc) - 60 100 mA Jitter (BW=10Hz to 20MHz) - - 8 pS RMS Jitter (BW=12kHz to 20MHz) - - 2 pS RMS MINIMUM NOMINAL MAXIMUM UNITS NOTE - 1.68 Vdc 2 - Vdc 2 INPUT CHARACTERISTICS The Connor-Winfield P731 is a 3.3V Crystal Oscillator (XO) with LVPECL Differential outputs and enable/disable function. The P731 is designed using a 2X or 4X PLL multiplication to achieve the high frequency output. TABLE 3.0 PARAMETER Disable Input Voltage (Low) (Vil) - Enable Input Voltage (High) (Vih) 2.275 FEATURES PECL OUTPUT CHARACTERISTICS TABLE 4.0 PARAMETER LOAD Voltage (High) (Low) (Voh) (Vol) Duty Cycle Rise / Fall Time 20% to 80% PACKAG E CHARACTERISTICS MINIMUM NOMINAL MAXIMUM UNITS NOTE 2.275 45 - 50 - 50 1.68 55 0.5 Ohms Vdc Vdc % nS 3 3.3V OPERATION 4 LOW JITTER <1pS RMS OVERALL FREQUENCY TOLERANCE: +/-50 PPM TABLE 5.0 Hermetically sealed ceramic package and metal cover. Package 250 to 800MHz TEMPERATURE RANGE: 0 to 85°C DIFFERENTIAL LVPECL OUTPUTS Pin 1 2 3 4 5 6 TABLE 6.0 Connection Enable / Disable N/C Ground Q Output Q Output Vcc ENABLE / DISABLE FUNCTION SURFACE MOUNT PACKAGE Enable / Disable Function (Pad 1) High or Open Low TABLE 7.0 Output Enable Disable (High Impedance) TAPE AND REEL PACKAGING RoHS COMPLIANT / LEAD FREE ORDERING INFORMATION Notes 1) Includes calibration @ 25°C, frequency stability vs. temperature, supply and load variations, shock, vibration and 20 years aging. 2) When the oscillator is disabled, the outputs are at High Impedance. Output is enabled with no connection on pad 1. 3) Output must be terminated into 50 ohms to Vcc – 2V or Thevenin equivalent. 4) Duty Cycle measured at 50% of output swing. P731 LVPECL CLOCK SERIES - 704.38058 MHz CENTER FREQUENCY Specifications subject to change without notice. DATA SHEET #: Ec236 PAGE 1 OF 2 REV: 00 DATE: 07/07/06 aCopyright 2001 Connor-Winfield all rights reserved. THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. WWW.CONWIN.COM PRODUCT D AT A SHEET CRYSTAL CONTROLLED OSCILLATORS PACKAGE LAYOUT 7 SUGGESTED PAD LAYOUT MAX 0 MAX CW P731 704.38058M 0628 .070 MAX (1.8mm) SOLDER PROFILE OUTPUT WAVEFORM Temperature 260°C 260°C 220°C 180°C 150°C 120°C 0 120 S Max. 10 S Time 60 S Max. 360 Sec. Max. TEST CIRCUIT 2 E/D N/C Vcc1 = Vcc2 = 3.3Vdc Specifications subject to change without notice. DATA SHEET #: Ec236 PAGE 2 OF 2 REV: 00 DATE: 07/07/06 aCopyright 2001 Connor-Winfield all rights reserved.