THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. WWW.CONWIN.COM PRODUCT D AT A SHEET CRYSTAL CONTROLLED OSCILLATORS CW P702 400M 0535 CERAMIC SURFACE MOUNT 3.3V LVPECL 5x7.0mm HIGH FREQUENCY CLOCK OSCILLATOR P702 ABSOLUTE M AXIMUM RATING S PARAMETER TABLE 1.0 UNITS MINIMUM NOMINAL MAXIMUM -55 - 125 °C Supply Voltage (Vcc) -0.5 - 4.6 Vdc Input Voltage (Vcc) -0.5 - Vcc+0.5 Vdc MINIMUM 250 -100 0 NOMINAL - MAXIMUM 800 100 70 UNITS MHz ppm °C Vdc Storage Temperature UNITS OPERATING SPECIFIC ATIONS TABLE 2.0 PARAMETER Center Frequency Total Frequency Tolerance Operating Temperature Range (Fo) NOTE 1 Supply Voltage (Vcc) 3.135 3.3 3.465 Supply Current (Icc) - 60 100 mA Jitter (BW=10Hz to 20MHz) - - 8 pS RMS Jitter (BW=12kHz to 20MHz) - - 2 pS RMS MINIMUM NOMINAL MAXIMUM UNITS NOTE - 1.68 Vdc 2 - Vdc 2 INPUT CHARACTERISTICS DESCRIPTION NOTE The Connor Winfield P702 is a Fixed Frequency, Surface Mount Crystal Controlled Oscillator (XO) designed for applications requiring low jitter and a ±100ppm, 0 to 70°C overall stability, LVPECL Differential Outputs and Tri-state Enable / Disable function. The P702 is designed using a 2X or 4X PLL multiplication to achieve the high frequency output. TABLE 3.0 PARAMETER Disable Input Voltage (Low) (Vil) - Enable Input Voltage (High) (Vih) 2.275 FEATURES LVPECL OUTPUT CHARACTERISTICS PARAMETER LOAD Voltage (High) (Low) TABLE 4.0 MINIMUM NOMINAL MAXIMUM UNITS NOTE 2.275 45 - 50 - 50 1.68 55 0.5 Ohms Vdc Vdc % nS 3 (Voh) (Vol) Duty Cycle Rise / Fall Time 20% to 80% PACKAG E CHARACTERISTICS Package 3.3V OPERATION LVPECL DIFFERENTIAL OUTPUTS ENABLE / DISABLE 4 TABLE 5.0 Hermetically sealed ceramic package and metal cover. Notes 1) Includes calibration @ 25°C, frequency stability vs. temperature, supply and load variations, shock, vibration and 20 years aging. 2) When the oscillator is disabled, the outputs are at High Impedance. Output is enabled with no connection on pad 1. 3) Output must be terminated into 50 ohms to Vcc – 2V or Thevenin equivalent. 4) Duty Cycle measured at 50% of output swing. LOW JITTER <2pS RMS OVERALL FREQUENCY TOLERANCE ±100ppm TEMPERATURE RANGE: 0 to 70°C SURFACE MOUNT PACKAGE TAPE AND REEL PACKAGING RoHS COMPLIANT ORDERING INFORMATION P702 CLOCK SERIES - 400MHz CENTER FREQUENCY Specifications subject to change without notice. DATA SHEET #: Ec218 PAGE 1 OF 2 REV: 01 DATE: 07/31/06 aCopyright 2001 Connor-Winfield all rights reserved. THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. WWW.CONWIN.COM PRODUCT D AT A SHEET CRYSTAL CONTROLLED OSCILLATORS PACKAGE LAYOUT 7 SUGGESTED PAD LAYOUT MAX 0 MAX CW P702 400M 0535 .070 MAX (1.8mm) PIN CONNECTIONS Pin 1 2 3 4 5 6 OUTPUT WAVEFORM TABLE 6.0 Connection Enable / Disable N/C Ground Q Output Q Output Vcc TABLE 7.0 Output Enable Disable (High Impedance) Enable / Disable Function (Pad 1) High or Open Low SOLDER PROFILE TEST CIRCUIT Temperature 260°C 260°C 220°C 180°C 150°C 120°C 2 E/D 0 N/C 120 S Max. 10 S Time 60 S Max. 360 Sec. Max. Vcc1 = Vcc2 = 3.3Vdc Specifications subject to change without notice. DATA SHEET #: Ec218 PAGE 2 OF 2 REV: 01 DATE: 07/31/06 aCopyright 2001 Connor-Winfield all rights reserved.