PDM Series Push-on Semi-Rigid and Semi-Flexible Cable Type Connectors ●The PDM series is a connector changed from the screw lock method of the SMA connector to pushing on the method. ●Because the connector can be detached in one-touch, operativeness is good. ●The plug connector is strong in the chape in the closed entry structure. SPECIFICATION Characteristic Impedance 50Ω Dielectric withstanding voltage 1000V AC (rms) for 1 minute Insulation resistance 1000MΩmin. at 500V DC Contact resistance 3mΩ max. Applicable Cable UT-85,UT-141A VSWR 1.3max. at DC～3GHz Specifications depends on each connector although these are basic specifications. MATERIAL/FINISH Contact Copper alloy/Gold plating Insulators PTFE Shell Copper alloy/Nickel plating Pull-out Tool P/N:357J-14474 Please ask us for the cable assemblies to assure its performance. ● 1 ● PDM Series Unit : mm ■ Plug Connector Semi-Rigid and Semi-Flexible Cable Type (φ9) P/N PDM-SP-141-SO Applicable Cable UT-141A , FCCAVG0 Note:without center contact. (14.5) (φ9) P/N PDM-SP-85-SO Applicable Cable UT-85 , FCCAVG1 (18.4) (19.3) Applicable Cable UT-141A , FCCAVG0 (12.4) PDM-LP-141-SO (10.7) (φ9) (φ9) P/N (19) ● 2 ● P/N PDM-LP-85-SO Applicable Cable UT-85 , FCCAVG1 PDM Series Unit : mm ■ Plug Connector Crimp Type (φ9) P/N PDM-SP-1.5DW-CR1 PDM-SP-2.5DHQS-CR1 Applicable Cable Hand Crimp Tool P/N 1.5D-QEW CR-H-1156 2.5D-HQ ・ SUPER 2.6D-XFU-A CR-H-1163 (23.7) Applicable Cable Hand Crimp Tool P/N PDM-LP-1.5DW-CR1 1.5D-QEW CR-H-1156 PDM-LP-2.5DV-CR1 2.5D-2V CR-H-1163 18.5 (φ9) P/N (19.3) ● 3 ● PDM Series Unit : mm ■ Receptacle Connector Panel Mounting Type/Four Hole PDM-SR φ1.27 8.6 φ4.11 4-φ2.6 1.65 (4) 4 8.6 11.7 □ 12.7 (19.7) PDM-SR-7 φ1.27 8.6 φ4.11 4-φ2.6 1.65 (4) 6 11.7 8.6 (21.7) □ 12.7 ● 4● PDM Series Unit : mm ■ Receptacle Connector Panel Mounting Type/Two Hole PDM-SR2 φ1.27 φ4.11 12.2 φ16.8 2-φ2.75 0.3 1.65 0.4 (2.5) 5.8 11.7 (14.2) PDM-SR2-D1 φ4.11 φ1.27 12.2 φ16.8 2-φ2.75 1.65 4 11.7 (6) 5.8 (17.7) PDM-SR2-D4 φ4.11 φ1.27 12.2 φ16.8 2-φ2.75 4 1.65 11.7 (6) 5.8 (17.7) ● 5● PDM Series Unit : mm ■ Receptacle Connector PDM-SR2-1 2-φ2.75 φ4.11 φ0.8 φ1.27 12.2 φ16.8 solder cup 1.65 4 11.7 (6) 5.8 (17.7) PDM-SR2-2 φ4.11 φ1.27 12.2 φ16.8 2-φ2.75 1.65 5 11.7 (7) 5.8 (18.7) PDM-SR2-5 φ4.11 φ1.27 12.2 φ16.8 2-φ2.75 1 5.8 4 1.65 11.7 (15.7) ● 6● PDM Series Unit : mm ■ Receptacle Connector PBC DIP Type PDM-SR-PC 4-φ1.9 ± 0.05 5.08 ± 0.05 2.54 ± 0.05 φ1.27 4- □ 1 φ1.5 ± 0.05 9 2.54 ± 0.05 5.08 ± 0.05 □6 12.9 PCB Mounting Dimensions 5-φ1.2 ± 0.05 □ 5.7 5.08 φ0.97 4- □ 0.7 ± 0.1 2.54 ± 0.05 PDM-SR-PC-D2 2.54 ± 0.05 5.08 ± 0.1 9 11.5 PCB Mounting Dimensions PDM-LR-PC 2.54 ± 0.08 4-φ1.8 ± 0.1 5.08 ± 0.08 3.5 12.5 7 φ1.3 ± 0.1 φ1 4- □ 0.94 2.54 ± 0.08 □ 5.08 5.08 ± 0.08 (15.9) PCB Mounting Dimensions ● 7●