BNC75 Series 75Ω BNC Type Connectors ●BNC75 series are connectors for 75 Ω group of BNC series (50Ω group). ●Intermateable with BNC series. ●Easy interface is established between test instruments, broadcasting eqipment, CATV and HDTV by bayonet lock mechanism. SPECIFICATION Characteristic Impedance 75Ω Dielectric withstanding voltage 1500V AC (rms) for 1 minute Insulation resistance 1000MΩmin. at 500V DC Contact resistance 3mΩ max. VSWR 1.3max. at DC～1GHz Specifications depends on each connector although these are basic specifications. MATERIAL/FINISH Shell (Body) Copper alloy/Nickel or Silver plating Contact (male) Copper alloy/Silver or Gold plating Contact (female) Copper alloy/Silver or Gold plating Insulators PTFE Gaskets Silicone rubber Please ask us for the cable assemblies to assure its performance. ● 1● BNC75 Series Unit : mm ■ Plug Applicable Cable φA φ14.5 P/N 1.5C-2W BNC75-P-1.5CQEW 26.3 1.5CQEW 2.5C-XW BNC75-P-2.5CW-CR10B 2.5C-2W φA φ14.5 BNC75-P-3CW-CR10B 24.3 3C-2W 3C-2WS P/N Applicable Cable φA BNC75-P-3C2W-CR10 3C-2W BNC75-P-3C-CR10 3C-2V BNC75-P-3C2W-CR10A 3C-2W 3C-2WS Finish Shell Contact Hand Crimp Tool P/N 5.50 Ni Au CR-H-1100 6.25 Ni Au CR-H-1105 7.90 Ni Au CR-H-1132 φA Finish Hand Crimp Tool P/N Note Au CR-H-1135 (*1) Deltamate Ni Au CR-H-1116 (*1) Deltamate Ni Au CR-H-1135 (*1) Deltamate Shell Contact 7.9 Ni 7.1 7.9 *1:Interference tool P/N 89134 is necessary Applicable Cable A BNC75-P-5 5C-2V BNC75-P-5C2W 5C-2W BNC75-SP-5CFB 5C-FB φ14.5 φ17.5 P/N φ4.0 φ14.5 A P/N BNC75-SP-1.5CCA-EXBV Finish Shell Contact 37 Ag Ag 37 Ni Ag 39 Ni Ag Finish Applicable Cable Shell Contact Hand Crimp Tool P/N 1.5CCA-EXBV Ni Au CR-H-1101 Shell Contact Hand Crimp Tool P/N Ni Au CR-H-1105 30 ■ Jack φ11.7 P/N BNC75-J-2.5C2W-CR10A 32.5 ● 2● Applicable Cable 2.5C-XW 2.5C-2W Finish BNC75 Series Unit : mm ■ Bulkhead Jack φ15.5 BNC75-BJ-2.5C2W-CR1 2 Finish Applicable Cable P/N 18 Shell Contact Ni Au 2.5C-2W 2.5C-QEW Hand Crimp Tool P/N 33.2 ■ Panel Jack 4-φ3.1 12.7 P/N BNC75-PJ-3CW-CR10B Applicable φA Cable 3C-2WS 11.8 32.6 BNC75-PJ-3C2V-CR1 2.3 Finish L 3C-2V 11.3 30.0 Shell Contact Hand Crimp Tool P/N Ni Au CR-H-1132 Ni Au CR-H-16776 12.7 14.0 17.5 L Mounting Hole +0.1 -0 12.7 ± 0.05 4-φ3.1 +0.1 φA -0 12.7 ± 0.05 4-φ3 12.7 P/N 2.3 15.8 12.7 17.5 L BNC75-PJ-1.5CCA-EXBV BNC75-PJ-1.5CV-CR2 BNC75-PJ-2.5V-CR-Ni Mounting Hole φ11.5 +0.1 -0 +0.1 -0 12.7 ± 0.05 4-φ3.1 12.7 ± 0.05 ● 3● Applicable Cable L 1.5CCA-EXBV 1.5C-2V 1.5C-QEV 2.5C-2V Finish Shell Contact Hand Crimp Tool P/N 34.5 Ni Au CR-H-1101 33.0 Ni Au CR-H-1101 34.5 Ni Ag CR-H-1110 BNC75 Series Unit : mm ■ Receptacle 12.7 4-φ3.1 15.8 12.7 26.3 BNC75-R-A 17.5 Mounting Hole +0.1 4-φ3.0 -0 12.7 ± 0.05 2.3 P/N +0.1 φ9.0 -0 12.7 ± 0.05 ● 4● Finish Shell Contact Ni Au