SMB Type Coaxial Connector 27DP Series FEATURE ■ 27DP series are connectors produced based on SMB type (Sub Miniature type B) specified in MIL-PRF-39012. ■ 27DP is super small size coaxial cable connectors for 50 Ω group corresponding to minimization of communication equipment. ■ Connection method is push on type, and Dpcosclaw P_lec fixing method cable is by crimping or soldering. DC to 2GHz CONFORMING STANDARD Af_p_arcpgqrga Gkncb_lac JIS-C-5415、MIL-PRF-39012、DSP-C-6205 50 Ω SPECIFICATIONS Characteristic Impedance 50 Ω Dielectric Withstanding Voltage 1,000V AC(r.m.s.) for 1minute Insulation Resistance 1,000M Ω min. at 500V DC Contact Resistance 6m Ω max. V.S.W.R. 1.2 max.（DC to 2GHz） ＊ The specifications are typical but may not apply to all connectors. Please check the specifications on each item with its drawing from us when you use. RoHS Compliant Compliant MATERIAL/FINISH Item Material / Finish Shell (Body) Copper Alloy / Au or Ni Plating Contact (Male) Copper Alloy / Au Plating Contact (Female) Copper Alloy / Au Plating Insulator PTFE ※ Please ask us for the cable assemblies to assure its performance. ◎ Specifications and/or dimensions in this catalog are subject to change without notice. Your checking the latest specifications with our drawings would be highly appreciated. 20111110 http://www.ddknet.co.jp 27DP Series Unit：mm ○ Plug Crimp Type Applicable Cable φ6 φA Part Number 27DP-P-1.5QEV-AA-CF L 27DP-P-1.5QEW-AA-CF 1.5DS-QEHV 1.5D-QEV 1.5D-2W 1.5D-QEW Finish Assembly Outer Center Instruction Crimp Tool Conductor Conductor φA L 4.8 17.5 Ni Au 4.8 17.5 Ni Au CR-H-1160 1 CR-H-1160 27DP-SP-1.5DHQS-CR1-CF 1.5D-HQ•SUPER 4.8 18.1 Ni Au CR-H-1156 27DP-SP-2.5DHQS-CR1-CF 2.5D-HQ•SUPER 5.9 18.2 Ni Au CR-H-1163 Finish Outer Center Conductor Conductor Applicable Cable Part Number φ6 φ4 Semi-Flexible Cable Type 27DP-SP-FCCAV1-SO-CF FCCAVG1 Ni Assembly Instruction Au 12.1 ○ Right Angle Plug Crimp Type Applicable Cable 14 Part Number 27DP-LP-0.8DW-CR1-CF 0.8D-QEW 1.5DS-QEHV 27DP-LP-1.5QEV-AA-CF 1.5D-QEV 27DP-LP-1.5QEW-AA-CF φA 1.5D-QEW Finish Assembly Instruction φA Outer Conductor Center Conductor 3.4 Ni Au CR-H-K0012-04 4.8 Ni Au CR-H-1160 4.8 Ni Au CR-H-1160 Crimp Tool 13.2 □6 Applicable Cable Part Number 14 27DP-LP-1.5DW-CR1-CF 1.5D-QEW 1.5D-HQ•SUPER 27DP-LP-1.5DHQS-CR1-CF 1.5D-QEV 2.5D-HQ•SUPER 27DP-LP-2.5DHQS-CR1-CF 2.6D-XFV-A φA L1 ◎ Specifications and/or dimensions in this catalog are subject to change without notice. Your checking the latest specifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 2 Finish Assembly Crimp Tool Center Instruction Conductor φA L1 Outer Conductor 4.8 10.0 Ni Au 4.8 10.0 Ni Au CR-H-1156 5.9 11.0 Ni Au CR-H-1163 2 CR-H-1156 27DP Series Unit：mm ○ Right Angle Plug Semi-Flexible Cable Type Applicable Cable 27DP-LP-FCCAV1-SO-1-CF FCCAVG1 Finish Outer Center Conductor Conductor Ni Assembly Instruction Au 9.3 Part Number 9.7 ○ Bulkhead Jack Crimp Type Part Number Applicable Cable 27DP-BJ-1.5DW-CR1-CF 1.5D-QEW Finish Outer Center Conductor Conductor Ni Assembly Instruction Au Crimp Tool CR-H-1156 +0.1 +0.1 3.2 0 φ7.9 φ6 1.2 0 .1 +00 2.5 以下 .2 φ5 8 19.4 Panel Mounting Dimensions Semi-Flexible Cable Type Applicable Cable Part Number 27DP-BJ-FCCAV1-SO-CF FCCAVG1 Finish Outer Center Conductor Conductor Ni Au +0.1 +0.1 3.2 0 φ7.9 φ6 1.2 0 .1 +00 2.5 以下 .2 φ5 3.43 14.3 Panel Mounting Dimensions ◎ Specifications and/or dimensions in this catalog are subject to change without notice. Your checking the latest specifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 3 Assembly Instruction 27DP Series Unit：mm ○ Receptacle Finish Part Number Outer Conductor Center Conductor Ni Au 2.54 0.05 27DP-SR-PC-1-CF 4-□0.7 5.08 0.1 7.3 □5.7 9.8 ＋0.1 0 5 ５−φ1.2 2.54 0.05 5.08 0.1 5.9 PCB Mounting Dimensions φ3.08 φ1 ４−φ2.4 5.9 Finish Outer Center Conductor Conductor Part Number 27DP-SR-1-CF Ni Au 1.7 9.5 □9.5 4 3 16.5 Finish Outer Center Conductor Conductor Part Number 5.9 27DP-SR-2-CF Ni φ3.4 1.7 4−φ2.4 5.9 1.7 9.5 □9.5 0.05 +0.1 0 +0.1 0 5.9 φ1 φ3.08 4-φ2.4 Au 1.5 12.7 5.9 0.05 Panel Mounting Dimensions Finish Part Number ２−φ２． ７５ φ1 2-φ2.75 9.5 +0.1 0 15.5 φ3.4 0.1 4 12.2 2 6.1 1.65 5.8 0.05 0.05 φ3.08 12.2 φ16.8 27DP-SR2-3-CF Panel Mounting Dimensions ◎ Specifications and/or dimensions in this catalog are subject to change without notice. Your checking the latest specifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 4 Outer Conductor Center Conductor Ni Au 27DP Series Unit：mm ○ Right Angle Receptacle Finish 27DP-LR-PC-1-CF 9.9 4.55 Part Number Outer Conductor Center Conductor Ni Au 2.5 ※ cheap version includes die-casting 27DP-LR-PC-14, (12) Finish Part Number Outer Conductor Center Conductor Ni Au 27DP-LR-PC-14 2.54 0.05 (9.9) 7.4 (11.1) 5.08 0.1 2.5 4.55 ※ low cost product using the press die-casting method (φ1) ＋0.1 5-φ1.2 0 2.54 0.05 5.08 0.1 PCB Mounting Dimensions 3.45 6.3 (6.6) Finish Part Number 0.3 27DP-LR-PS 0.05 0.05 Au Au ※ low cost product using the press die-casting method 1.55 2.1 1.8 Center Conductor 0.05 6.52 0.05 1.55 □5.92 0.05 1 3.42 1.8 (φ1) 0.05 1 (1.76) 0.05 (12.9) Outer Conductor 0.05 (7.1) Finish Part Number 0.3 2-φ１ 0.5 3.45 6.3 PCB Land Reference Dimensions 4.92 27DP-LR-PS-1 Outer Conductor Center Conductor Au Au 3.26 φ1.2 0.05 ※ low cost product using the press die-casting method 0.05 4.92 3.42 6.52 0.05 1.55 □5.92 0.05 1 (φ1) 0.05 1.55 0.05 0.05 0.05 2.1 1.8 1.8 0.05 1 (1.76) 0.05 (12.9) PCB Land Reference Dimensions ◎ Specifications and/or dimensions in this catalog are subject to change without notice. Your checking the latest specifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 5 27DP Series Unit：mm ○ Bulkhead Receptacle Finish Part Number φA φB C D L Outer Conductor Center Conductor 27DP-BR-9-CF 7.0 0.5 27DP-BR-11-CF 6.2 0.8 2.2 6.0 12.9 Ni Au 3.0 5.4 13.7 Ni Au φB φA Ｍ５ ０． ５ 1 2.3 L C D ◎ Specifications and/or dimensions in this catalog are subject to change without notice. Your checking the latest specifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 6 27DP Series Unit：mm ○ Assembly Instruction (1) Parts Configuration Ferrule Boot Insulator ① Outer Conductor Contact Center Conductor Pre-soldering ① Show it to illustration dimensions through a boot to a cable. (Note) Be careful about the directionality of the ferrule. (Note) Please be careful to not damage the outer conductor, insulator and center conductor. Pre-soldering the center conductor. 2 Boot 1.5 Cable Ferrule 4 Contact ② No gap ② Soldering cable inside conductor and a contact. (Note) Please be careful to not deform the insulator by heat. (Note) When the solder is stick out, please shave the extra solder. Soldering → ③ Body ③ Spread the tip of the outside conductor. Spread the tip ④ ④ Insert a cable in body assembling and cover with the ferrule which let go through beforehand on an outside conductor, Crimp. (Note）The thing by which a gap between the body assembly ferrule is less than 0.5. Crimping Dies A-R 1.72∼2.14 (body assembling - contact interval) ⑤ ⑤ Cover the boot on the ferule. Boot ◎ Specifications and/or dimensions in this catalog are subject to change without notice. Your checking the latest specifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 7 27DP Series Unit：mm ○ Assembly Instruction (2) Parts Configuration Plate Body Ferrule The cable length required for the cable assembly. L L=L1+0.6 L1 L=L2-2.5 L2 ① Ferrule ① Insert the ferrule into the cable. Cable Insulator Center Conductor Outer Conductor Pre-soldering ② ② Handle a cable end face to illustration dimensions. 2 0.2 5 0.2 (Note）Please be careful to not damage the outer conductor and center conductor. Pre-solder the center conductor. 8.6 0.2 ③ Disentangle an outside conductor uniformly and ③ spread the tip. Spread the tip ④ Cable outside conductor stab expectation Contact slit part Body assembly Crimping Dies A-R1 Soldering Contact ⑤ ④ Insert body assembling between an outside conductor, insulators. (Note）Internal conductor in a contact slit more than half Being satisfied. (Note）Aya cover evenly over the first knurling the outer conductor. cover with the ferrule which let go through beforehand on an outside conductor and knock it against body system and crimp it. (Note) The gap between body and ferrule is within 0.5. Solder cable inside conductor and a contact. (Note) Please be careful to not deform the insulator by heat. 0.5 max. 0.15∼0.3 Height after press-in （gap between ferrule and body） ⑤ Compress the plate into the body. ◎ Specifications and/or dimensions in this catalog are subject to change without notice. Your checking the latest specifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 8