LED - Lamp ELD-1060-525 15.11.2007 rev. 04 Radiation Type Technology Case Infrared MQW InGaAs/InP 5 mm plastic lens Description High-power, high-speed infrared LED in standard 5 mm package, housing without standoff leads 8,6 5,75 - 0,3 1 2,54 0,8 - 0,4 Anode Note: Special packages with standoff available on request Applications 1,5 0,6 - 0,2 36,5 ± 1,0 Ø5 Optical communications, safety equipment, automation Maximum Ratings Tamb = 25°C, unless otherwise specified Test сonditions Parameter Symbol Value Unit IF 100 mA IFM 200 mA PD 150 mW Operating temperature range Tamb -20 to +80 °C Storage temperature range Tstg -55 to +100 °C Tsd 260 °C Typ Max Unit VF 0.75 0.9 V 0,85 Forward current (DC) (tP ≤ 50 µs, tP /T = 1/2) Peak forward current Power dissipation t ≤ 5 s, 3 mm from case Soldering temperature Optical and Electrical Characteristics Tamb = 25°C, unless otherwise specified Test Parameter conditions IF = 20 mA Forward voltage Symbol Min Forward voltage* IF = 100 mA VF Reverse voltage IR = 100 µA VR 5 Radiant power IF = 20 mA Φe 1,3 Radiant power* IF = 100 mA Φe Peak wavelength IF = 20 mA λp Spectral bandwidth at 50% IF = 20 mA ∆λ0.5 50 nm Viewing angle IF = 20 mA ϕ 20 deg. Switching time *for information only IF = 20 mA tr, tf 10 ns 1040 V V 1,6 mW 5,5 mW 1060 1080 nm Note: All measurements carried out on EPIGAP equipment We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications.All operating parameters must be validated for each customer application by the customer. EPIGAP Optoelektronik GmbH, D-12555 Berlin, Köpenicker Str.325 b, Haus 201 1 of 1 Tel.: +49-30-6576 2543, Fax : +49-30-6576 2545