LED - Lamp ELP-880-014-1 16.11.2007 rev. 04 Radiation Type Technology Case Infrared Point source (ball lens) AlGaAs/GaAs TO-18 + flat window Description High power, high speed infrared point source LED, high reliability, small-size emitting aperture Ø5,4 Ø0,55 Ø 0,45 0,4 Ø2,4 2,54 Ø4,65 Cathode Cathode Anode Anode Optical communications, safety equipment, automation, optical sensors, optical switches 0,25 2,0 13,5 ±0,1 ±1,0 3,3 Applications ±0,2 Maximum Ratings Tamb = 25°C, unless otherwise specified Parameter Test сonditions Symbol Value Unit IF 80 mA IFM 400 mA PD 150 mW Operating temperature range Tamb -30 to +100 °C Storage temperature range Tstg -40 to +125 °C Tsd 260 °C Typ Max Unit 1.8 2.3 V Forward current (DC) (tP ≤ 50 µs, tP /T = 1/2) Peak forward current Power dissipation t ≤ 5 s, 3 mm from case Soldering temperature Optical and Electrical Characteristics Tamb = 25°C, unless otherwise specified Test Parameter conditions IF = 50 mA Forward voltage Symbol Min VF Reverse voltage IR = 10 µA VR 5 Radiant power IF = 50 mA Φe 2,5 3,5 mW Radiant intensity IF = 50 mA Ιe 23 36 mW/sr Peak wavelength IF = 50 mA λp 865 875 Spectral bandwidth at 50% IF = 50 mA ∆λ0.5 35 nm Viewing angle IF = 50 mA ϕ 12 deg. Switching time IF = 50 mA tr, tf 16 ns V 885 nm Note: All measurements carried out on EPIGAP equipment We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications.All operating parameters must be validated for each customer application by the customer. EPIGAP Optoelektronik GmbH, D-12555 Berlin, Köpenicker Str.325 b, Haus 201 1 of 1 Tel.: +49-30-6576 2543, Fax : +49-30-6576 2545