• Provides a hard-copy printout of all
system events and status changes.
• Time-stamps the printed record of each
event and status change with the current
time-of-day and date.
• Uses standard 9" x 11" tractor-feed
fanfold paper.
• Provides 80 columns of data at 10
characters per inch.
• Provides printed record of system
configuration and addressable device
• Nine-pin print head.
• Very quiet (approximately 53 dBA).
The SN600-PTR UL-Listed printer is used with Gamewell 600 Series Fire
Alarm Control Panels (FACPs) to provide a written record of system events
and status changes. It features enhanced ground isolation to reduce ground
The SN600-PTR printer is for use with Gamewell 600 Series FACPs.
Printed transaction records reduce the man-hours required to install and
maintain a system. A printed record of all system events (alarms, troubles,
etc.) and status changes can be especially valuable in the event of a disputed incident.
Construction and Operation
The printer is housed in its own separate enclosure and is suitable for
placement on a desk top, counter, or table.
Consult the control panel installation manual for the proper method and
pin numbers used to complete the electrical connection to the control panel.
NOTE: If printer operation is required during failure of primary power, use
of a separate UL-Listed Uninterruptable Power Supply (UPS) system is
Ordering Information
Network parallel printer, 120 VAC power.
Page 1 of 2
• Printing method: Serial or parallel
printing with 9-pin matrix print head.
• Printing speed, copy draft: 310 cps at
10 cpi.
• Character density: 10 cpi standard (12,
15, 17.1, and 20 cpi available via front
• Graphic resolution (V x H): 144 x 240 dpi.
• Ribbon life (approximate): 4 million
characters (DPQ).
• Acoustic noise level: 53 dBA (approx.).
• Dimensions: 19" (48.26 cm) wide x 7.9"
(20.07 cm) high x 9.7" (24.64 cm) deep.
• Weight: 17.6 pounds (7.9 kg).
• Power supply: 120/240 VAC.
• Power consumption: 50 watts (operating).
• Operating environment temperature:
50°F to 104°F (10°C to 40°C).
• Operating environment humidity: 20%
to 80% (noncondensing).
Listings and approvals below apply to
the basic SN600-PTR Printer.
In some cases, certain modules may not
be listed by certain approval agencies,
or listing may be in process. Consult
factory for latest listing status.
• UL Listed: file S521.
12 Clintonville Road
Northford, CT 06472-1610
Phone: 203-484-7161
Fax: 203-484-7118
A Honeywell Company
© 2006 Gamewell-FCI
Specifications and wiring information are provided for information only and are
believed to be accurate. Gamewell-FCI assumes no responsibility for their use.
Data and design are subject to change without notice. Installation and wiring
instructions shipped with the product shall always be used for actual installation.
For more information, contact Gamewell-FCI.
Page 2 of 2