PTR-2 Dot Matrix Printer Description The Fire Control Instruments Model PTR-2 narrow carriage, 9-pin dot matrix printer is designed to work with the various FCI fire alarm control panels. This printer will furnish a printed record of all events occurring in the system. Small and compact, the PTR-2 printer is the ideal supplement to the FCI fire alarm system. Installation The PTR-2 is simple to install. The unit must be plugged in to a local 120 VAC power source. A factory-furnished cable is plugged into the printer and the other end is plugged into the printer port of the FCI fire alarm control panel. Note: The PTR-2 operates on 120 VAC only. For operation during a power failure, we recommend use of an uninterruptible power supply (UPS). Paper Type Max. Media Size: Media Type: PTR-2 Features • Supervised Operation. • High Speed Printing. A4 (8.25 in x 11.7 in.) Continuous forms, perforated plain paper, plain paper • Compact Design. • Correspondence Quality Print. Specifications • Simple Installation. Input Power 120 VAC, 60 Hz 90 watts (Operational) 10 watts (Stand By) RS-232C • Low Noise Level. 9,600 bits/second 1,200 bits/second 50° to 95° F (10° to 35° C) Ordering Information I/F Type Baud Rate: 7100 7200 Operating Temperature Relative Humidity Dimensions Weight 20 - 80% 7.8" H x 16.8" W x8.5"D (19.8 H x 42.7 W x 21.6 D cm) 10.8 lbs. (4.9 kg) • Ergonomic Design. Model Description PTR-2 Dot Matrix Printer E3 Series™ is a trademark of FCI. GAMEWELL-FCI 12 Clintonville Road, Northford, CT 06472 - Tel: (203) 484-7161 - Fax: (203) 484-7118 Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use. ©2006 Gamewell-FCI All rights reserved. www.gamewell-fci.com 9020-0550 Rev. B page 1 of 1