UF5400-E thru UF5408-E ULTRAFAST EFFICIENT GLASS PASSIVATED RECTIFIER Voltage: 50 to 1000V Current: 3.0A DO-201AD FEATURE Low power loss High surge capability Ultra-fast recovery time for high efficiency High temperature soldering guaranteed 250℃/10sec/0.375″lead length at 5 lbs tension Halogen Free MECHANICAL DATA Terminal:Plated axial leads solderable per MIL-STD 202E, method 208C Case:Molded with UL-94 Class V-0 recognized Halogen Free Epoxy Polarity:color band denotes cathode Mounting position:any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated, for capacitive load, derate current by 20%) Symbol UF5 400E 50 UF5 401E 100 UF5 402E UF5 403E UF5 404E UF5 405E UF5 406E UF5 407E UF5 408E units 200 300 400 500 600 800 1000 V Maximum Recurrent Peak Reverse Voltage Vrrm Maximum RMS Voltage Vrms 35 70 140 210 280 350 420 560 700 V Maximum DC blocking Voltage Vdc 50 100 200 300 400 500 600 800 1000 V Maximum Average Forward Rectified Current 3/8" lead length at Ta =55°C Peak Forward Surge Current 8.3ms single Half sine-wave superimposed on rated load Maximum Instantaneous Forward Voltage at Rated forward current Maximum DC Reverse Current Ta =25°C At rated DC blocking voltage Ta =125°C If(av) 3.0 A Ifsm 150.0 A Maximum Reverse Recovery Time (Note 1) Trr 50 75 nS Typical Junction Capacitance (Note 2) Cj 45.0 36.0 pF (Note 3) Rth(ja) Rth(jl) 20.0 8.5 ℃/W Storage and Operating Junction Temperature Tstg, Tj -55 to +150 °C Typical Thermal Resistance Vf 1.0 1.7 10.0 100.0 Ir µA Note: 1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc 3. Thermal Resistance from Junction to Ambient and Junction to Lead with 3/8″lead length, both leads attached to heatsink Rev.A1 V www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES UF5400-E THRU UF5408-E Rev.A1 www.gulfsemi.com