FERP16J Ultra fast Plastic Rectifiers VOLTAGE: 600V CURRENT:16.0A FEATURE ITO-220AB • Plastic package has Underwriters Laboratories Flammability Classification 94V-0 • Ideally suited for use in very high frequency switching power supplies, inverters and as free wheeling diodes • Ultra fast recovery time for high efficiency • Excellent high temperature switching • Glass passivated junction •High voltage and high reliability • High speed switching • Low forward voltage MECHANICAL DATA Case: JEDEC ITO-220AB molded plastic body over passivated chip Terminals: Plated Insert leads, solderable per MIL-STD-750, Method 2026 Mounting Position: Any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated) SYMBOL FERP16J units Maximum Recurrent Peak Reverse Voltage Vrrm 600 V Maximum RMS Voltage Vrms 420 V Maximum DC blocking Voltage Vdc 600 V Maximum Average Forward Rectified at Tc =100°C If(av) 16.0 A Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Forward Voltage at Forward Current 8.0A Ifsm 125 A at Vf 1.50 V (Note 1) Trr 50 nS Rth(jc) 3.1 Ir 10 500 µA Cj 60 pF Tstg, Tj -55 to +150 °C Maximum Reverse Recovery Time Typical thermal resistance junction to case Maximum DC Reverse Current Ta =25°C at rated DC blocking voltage Ta =100°C Typical Junction capacitance per leg at 4V, 1MHz Storage and Operating Temperature Range °C/W Note: 1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES FERP16J Rev.A1 www.gulfsemi.com