UGSP05G Ultra fast Plastic Rectifiers VOLTAGE: 400V CURRENT:5.0A FEATURE ITO-220AC • Plastic package has Underwriters Laboratories Flammability Classification 94V-0 • Ideally suited for use in very high frequency switching power supplies, inverters and as free wheeling diodes • Ultra fast recovery time for high efficiency • Excellent high temperature switching • Glass passivated junction • High voltage and high reliability • High speed switching • Low forward voltage MECHANICAL DATA Case: JEDEC ITO-220AC molded plastic body over passivated chip Terminals: Plated Insert leads, solderable per MIL-STD-750, Method 2026 Mounting Position: Any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated) Parameter SYMBOL UGSP05G units Maximum Recurrent Peak Reverse Voltage Vrrm 400 V Maximum RMS Voltage Vrms 280 V Vdc 400 V If(av) 5.0 A Ifsm 80 A Vf 1.53 V Trr 32 nS Rth(jc) 5.0 Ir 1.0 200 Typical thermal resistance junction to case Rth(jc) 5.0 Storage and Operating Temperature Range Tstg, Tj -40 to +150 Maximum DC blocking Voltage Maximum Average Forward Rectified at Tc=111℃ Non-repetitive Peak Forward Surge Current 50Hz half sine- wave Maximum Forward Voltage at Forward Current 5A and 25°C Maximum Reverse Recovery Time (Note 1) Typical thermal resistance junction to case Maximum DC Reverse Current at rated DC blocking voltage Ta =25°C Ta =125°C °C/W µA °C/W °C Note: 1. Reverse Recovery Condition Ta =25℃, Ifm =5.0A, -di/dt =50A/us Rev.A2 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES UGSP05G Rev.A2 www.gulfsemi.com