MUR260 GLASS PASSIVATED JUNCTION Ultra fast Plastic Rectifiers VOLTAGE: 600V CURRENT:2.0A DO-15 FEATURE • Plastic package has Underwriters Laboratories Flammability Classification 94V-0 • Ideally suited for use in very high frequency switching power supplies, inverters and as free wheeling diodes • Ultra fast recovery time for high efficiency • Excellent high temperature switching • Glass passivated junction • High temperature soldering guaranteed: 250°C/10 seconds, 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension MECHANICAL DATA Case: JEDEC DO-15 molded plastic body over passivated chip Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.045 oz., 1.2 g Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated) Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified at=60°C Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Forward Voltage at rated Forward Current and 25°C Maximum Reverse Recovery Time (Note 1) Typical thermal resistance junction to ambient (Note 2) Maximum DC Reverse Current Ta =25°C at rated DC blocking voltage Ta =125°C Storage and Operating Temperature Range SYMBOL MUR260 units Vrrm Vrms Vdc 600 420 600 V If(av) 2.0 A Ifsm 35 A Vf 1.35 V Trr 50 nS RθJA 50 Ir Tstg, Tj V °C/W µA µA 10 100 -55 to +150 °C Note: 1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 2. Thermal Resistance from Junction to Ambient at 3/8”lead length, P.C. Board Mounted Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC MURVES MUR260 1 1 Rev.A1 www.gulfsemi.com