UESP06G Ultra fast Plastic Power Rectifiers VOLTAGE VOLTAGE:: 400V 0A CURRENT: 6. 6.0 FEATURE -2 20AC ITO ITO-2 -220AC • Plastic package has Underwriters Laboratories Flammability Classification 94V-0 • Ideally suited for use in very high frequency switching power supplies, inverters and as free wheeling diodes • Ultra fast recovery time for high efficiency • Excellent high temperature switching • Glass passivated junction •High voltage and high reliability • High speed switching • Low forward voltage MECHANICAL DATA Case: JEDEC ITO-220AC molded plastic body over passivated chip Terminals: Plated Insert leads, solderable per MIL-STD-750, Method 2026 Mounting Position: Any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated) Maximum Maximum Maximum Maximum Recurrent Peak Reverse Voltage RMS Voltage DC blocking Voltage Average Forward Rectified at Tc =100°C Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Forward Voltage at rated Forward Current at 6A Maximum Reverse Recovery Time (Note 1) Typical thermal resistance junction to case Maximum DC Reverse Current Ta =25°C at rated DC blocking voltage Ta =125°C Storage and Operating Temperature Range SYMBOL UESP06G units Vrrm Vrms Vdc 400 280 400 V V V If(av) 6.0 A Ifsm 75 A Vf 1.4 V Trr 35 nS RθJc 7.0 °C/W Ir Tstg, Tj Note: 1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A Rev.A1 10 100 -55 to +150 µA µA °C RATINGS AND CHARACTERISTIC CURVES UESP06G