HITRON HDM17-12B-D05

H HiTRON
PCB-MOUNT DC-DC CONVERTER ENCAPSULATED MODULES
INDUSTRIAL GRADE 17 WATTS SINGLE & DUAL OUTPUT
HDM17-S & HDM17-D SERIES
FEATURES:
SINGLE & DUAL OUTPUT
2:1 INPUT RANGE
17W ISOLATED OUTPUT
SIX-SIDED METAL SHIELD
SPECIFICATION
INPUT SPECIFICATION
OUTPUT SPECIFICATION
Input Range: 2:1 DC input range.
See Ratings Chart.
Input Voltage: Nominal 12/24/48Vdc.
Input Current: Various with input range & load.
See Ratings Chart.
Input Fuse: Use external fuse.
Input Filter: Pi-Network.
Undervoltage Shutdown: 8Vdc.
Isolation Resistor: 1,000 Mega Ohms.
Isolation Voltage: 1,500Vdc.
EMI: Six-sided metal shielding.
Remote On/Off: TTL/CMOS-Compatible Input Control.
Positive Logic version for Standard set up:
ON(Enable)=Open(or 2.5-5.0Vdc above-Vin).
OFF(Disable)=Short(or 0-0.8Vdc above-Vin).
Negative Logic version option available by adding a
“N” suffix to the end of Model #.
Output Voltage: See Ratings Chart.
Output Current: See Ratings Chart.
Voltage Accuracy: Main O/P ±1.0% typical.
Line Regulation: Various with output voltages.
±0.5% typical.
Load Regulation: Various with output voltages.
Single O/P ±1.0% typical.
Dual O/P ±2.0% typical.
Noise & Ripple: Typical 100mV for 3.3V/5.0V &
1.0% for others peak to peak.
OVP: Built-in on main output.
Adjustability: Not available.
Overload Protection (OLP):
Fully protected against output overload and short circuit.
Typical 120-150% of rating output load.
Consult the factory for special OLP setting.
Remark: Logic voltage refer to –Input(-Vin).
GENERAL SPECIFICATION
Efficiency: 80-81% typical various with input.
Switching Frequency: Fixed frequency 450K Hz.
Circuit Topology: 450K Hz. Forward Circuit.
Transient Response: Peak deviation 200mV,
Recovery time <3mSec. @ 25% step load change.
Case: Black coated steel with non-conductive
metal base.
Power Density: 18.0Watts. / Cubic inch.
MTBF: 1,000,000 hours to Mil. Std. 217, 25°C.
Operating Temperature: -25°C to +85°C range.
–10°C to +70°C @ full load without derating.
Derating linearly from +70°C to half-load @ +85°C.
(Refer to the Derating Chart).
Storage Temperature: -40°C to +105°C.
Temperature Coefficient: ± 0.03% /°C.
Humidity: Up to 95% RH, Non-condensing.
Cooling: Convection cooling up to+70°C @full load.
At least 100LFM moving air is recommended for
full load >+70°C in a confined area.
Industrial Grade only.
NOTE:(1) All measurements are at nominal input, full load and +25°C unless otherwise specified.
(2) Line Regulation measured from High to Low Lines at full load.
(3) Load Regulation measured from Full Load (F-L) to Half-Load (H-L) at nominal input.
(4) Correct fuse size by calculating the max. DC current drains at low Line input & Load and then adding 20-25% for the desired fuse size.
Due to requests in market and advances in technology, specifications subject to change without notice.
-23-
INPUT/OUTPUT & VOLTAGE/CURRENT RATINGS CHART
SINGLE OUTPUT
MODEL NO.
HDM17-12B-S03
HDM17-12B-S05
HDM17-12B-S09
HDM17-12B-S12
HDM17-12B-S15
HDM17-24B-S03
HDM17-24B-S05
HDM17-24B-S09
HDM17-24B-S12
HDM17-24B-S15
HDM17-48B-S03
HDM17-48B-S05
HDM17-48B-S09
HDM17-48B-S12
HDM17-48B-S15
INPUT
VDC
9.0- 18.0
9.0- 18.0
9.0- 18.0
9.0- 18.0
9.0- 18.0
18.0- 36.0
18.0- 36.0
18.0- 36.0
18.0- 36.0
18.0- 36.0
36.0- 72.0
36.0- 72.0
36.0- 72.0
36.0- 72.0
36.0- 72.0
INPUT CURRENT
N. L. (mA) F.L.
20
1,200
15
1,740
15
1,740
15
1,740
15
1,730
15
600
10
870
10
870
10
870
10
860
15
300
10
435
10
435
10
435
10
430
OUTPUT ★ OUTPUT
VO1(A)
VO1(Vdc)
3.3V
3.40A
5.0V
3.40A
9.0V
1.88A
12.0V
1.41A
15.0V
1.13A
3.3V
3.40A
5.0V
3.40A
9.0V
1.88A
12.0V
1.41A
15.0V
1.13A
3.3V
3.40A
5.0V
3.40A
9.0V
1.88A
12.0V
1.41A
15.0V
1.13A
INPUT
Vdc
9.0- 18.0
9.0- 18.0
9.0- 18.0
9.0- 18.0
18.0- 36.0
18.0- 36.0
18.0- 36.0
18.0- 36.0
36.0- 72.0
36.0- 72.0
36.0- 72.0
36.0- 72.0
INPUT CURRENT
N. L. (mA) F.L.
25
1220
20
1760
20
1740
20
1760
20
610
15
880
15
870
15
855
20
305
15
440
15
435
15
427
OUTPUT (Vdc)
+VO1 ★
-VO2║
+3.3V
-3.3V
+ 5.0V
- 5.0V
+12.0V
-12.0V
+15.0V
-15.0V
+3.3V
-3.3V
+ 5.0V
- 5.0V
+12.0V
-12.0V
+15.0V
-15.0V
+3.3V
-3.3V
+ 5.0V
- 5.0V
+12.0V
-12.0V
+15.0V
-15.0V
CASE
SIZE
DM2C
DM2C
DM2C
DM2C
DM2C
DM2C
DM2C
DM2C
DM2C
DM2C
DM2C
DM2C
DM2C
DM2C
DM2C
DUAL OUTPUT
MODEL NO.
HDM17-12B-D03
HDM17-12B-D05
HDM17-12B-D12
HDM17-12B-D15
HDM17-24B-D03
HDM17-24B-D05
HDM17-24B-D12
HDM17-24B-D15
HDM17-48B-D03
HDM17-48B-D05
HDM17-48B-D12
HDM17-48B-D15
Symbols: "★" OVP built-in.
OUTPUT (A)
+VO1
-VO2
1.70A
1.70A
1.70A
1.70A
0.70A
0.70A
0.55A
0.55A
1.70A
1.70A
1.70A
1.70A
0.70A
0.70A
0.55A
0.55A
1.70A
1.70A
1.70A
1.70A
0.70A
0.70A
0.55A
0.55A
CASE
SIZE
DM2C
DM2C
DM2C
DM2C
DM2C
DM2C
DM2C
DM2C
DM2C
DM2C
DM2C
DM2C
"║" Double Feedback.
MECHANICAL DIMENSIONS: MM [INCHES]
WEIGHT: 27.5g (0.97 Oz.)
PIN ASSIGNMENT
PIN NO.
PIN# 1.
PIN# 2.
PIN# 3.
PIN# 4.
PIN# 5.
PIN# 6.
SINGLE
Remote ON/OFF
-INPUT/-Vin
+ INPUT
DC-COM
NO PIN
VO1
DERATING CHART
CASE SIZE: DM2C
-24-
DUAL
Remote ON/OFF
-INPUT/-Vin
+INPUT
-VO2
DC-COM
+VO1