H HiTRON UNIVERSAL AC INPUT AC-DC INDUSTRIAL DIN-RAIL SINGLE OUTPUT 65 WATTS SWITCHING MODE POWER SUPPLIES HID65 SERIES FEATURES: ACCOMMODATE UNIVERSAL AC SOURCES MEET UNIVERSAL SAFETY STANDARD AND INDUSTRIAL UL 508 INDUSTRIAL POWER SUPPLIES FOR SNAP-ON MOUNTING ON DIN-RAILS EMI MEET CISPR PUB. 22 & FCC CLASS B CE MARKING COMPLIANCE SPECIFICATION INPUT SPECIFICATION Input Voltage: Typ. 90-264Vac. Input Connector: M-T plug connector. Input Frequency: 47-63Hz. Inrush Current: 21.1A @230Vac. Input Current: 0.96A @115Vac, 0.48A @230Vac. Dielectric Withstand: Meet IEC 60950-1. EMI: Meet CISPR EN 55022 & FCC B. No Load Operation: No damage. Hold-up Time: 13mS @115Vac/ 53.6mS @230Vac. Earth Leakage: Less than 0.24mA @230Vac. OUTPUT SPECIFICATION Output Voltage: See Ratings Chart. Output Current: See Ratings Chart. Output Wattage: Typ. 65W continuous. Output Connector: M-T plug connector. Line Regulation: Typ. 0.4%. Load Regulation: Vary with output voltage. Typ. ±1%. Noise & Ripple: Typ. 1% peak to peak. OVP: Built-in (Latch). Adjustability: Available at VO1. LED Indicator: Output indicating. Overload Protection (OLP): Fully protected against output overload and short circuit. Typically set at 130% max. load. Consult the factory for special OLP setting. GENERAL SPECIFICATION Efficiency: Typ. 79%. Switching Frequency: Fixed frq.60K Hz. Circuit Topology: Fixed frequency flyback circuit. Transient Response: Peak transient typ. 93mV, recovers in 0.1mS following a 25% load change. Safety Standard: IEC 60950-1/UL 60950-1 Class I. Power Density: 2.0 Watt/ Cubic Inch. Industrial Grade UL 508. Operating Temperature: -10 to +70°C. Derating from +60 °C to +70°C by derating 2%/°C. Storage Temperature: -25 to +85°C. Temperature Coefficient: Typ. 0.03% /°C. Cooling: Convection cooling for Ta < +60°C. Moving air is request for Ta >+ 60°C full load operation. Construction format: Enclosure metal box with DIN-clips format. MTBF Demonstrated: >380,000 hours at full load and 25°C ambient conditions. Note: Due to requests in market and advances in technology, specifications subject to change without notification. In application -31- OUTPUT VOLTAGE / CURRENT RATINGS CHART SINGLE OUTPUT MODEL NO. MAIN VO1 @ Typ. Volt. Peak HID65-S120054 5.4A 12.0V 6.0A HID65-S240027 2.7A 24.0V 3.0A HID65-S480013 1.3A 48.0V 1.5A Symbol: "@"Adjustable. " " OVP built-in . Remark: Peak load less than 60 sec. with duty cycle <10%. MECHANICAL DIMENSIONS: MM [INCHES] WEIGHT: 460.0g(16.22 Oz.) INPUT & OUTPUT CONNECTORS PIN ASSIGNMENT ASSIGNMENT CNTR & PIN # AC-LINE P1-3(L) AC INPUT AC-NEUTRAL P1-2(N) AC-GROUND P1-1(G) SINGLE OUTPUT VO1 DC COM P2-3,4 P2-1,2 -32-