H HiTRON UNIVERSAL INPUT AC-DC PCB OPEN FRAME DUAL OUTPUT 10.5 WATTS INTERNAL SWITCHING POWER SUPPLIES HVI10.5 SERIES FEATURES: ACCOMMODATE UNIVERSAL AC SOURCES COMPACT PCB OPEN FRAME FORMAT MEET UNIVERSAL SAFETY STANDARDS EMI MEET CISPR PUB. 22 & FCC CLASS B CE MARKING COMPLIANCE SPECIFICATION INPUT SPECIFICATION OUTPUT SPECIFICATION Input Voltage: Range Typ. 90-264Vac. Rating 100 to 240Vac. Input Connector: Molex # 5273. Input Frequency: 47-63Hz. Inrush Current: Typ. ≤ 30.6A @230Vac. Input Current: Typ. 0.3A @115Vac, 0.15A @ 230Vac. Dielectric Withstand: Meet IEC950. EMI: Meet CISPR PUB. 22 & FCC Class B. Hold-up Time: Typ. 10mS @115Vac, 40mS @230Vac. Earth leakage: Typ. 0.253mA @230Vac. Overload Protection (OLP): Fully protected against output overload and short circuit. Consult the factory for OLP setting. Output Voltage: See Ratings Chart. Output Current: See Ratings Chart. Output Wattage: Typ. 10.5 watts. Output Connector: Molex # 5273. Line Regulation: Typ. 0.1%. Load Regulation: Main VO1 typ. ±1-2%. Aux. VO2 typ. ±2-3% (P.R.). or ±3-5% (stacked-on). Noise & Ripple: Typ. 1.0% peak to peak. OVP: Built-in at main output VO1 (Zener diode). Adjustability: Available at main output VO1. GENERAL SPECIFICATION Efficiency: Typ. 70-75%. Switching Frequency: Typ. 40K Hz. Circuit Topology: Fixed frequency flyback circuit. Transient Response: Output voltage returns in less than 3mS following a 25% load change. Safety Standard: IEC950/UL1950 Class II. Operating Temperature: 0 to +50°C. Storage Temperature: -20 to +85°C. Temperature Coefficient: Typ. 0.04%/°C. Cooling: Free air convection. Construction: PCB open frame format. Power Density: 1.10Watts / Cubic Inch. In application -5- OUTPUT VOLTAGE/CURRENT RATINGS CHART DUAL OUTPUT MODEL NO. HVI10.5-D033E HVI10.5-D033I HVI10.5-D033K HVI10.5-D050I HVI10.5-D050K MAIN VO1 @ Typ. Max. Volt. 2.5A 3.0A +3.3V 2.5A 3.0A +3.3V 2.5A 3.0A +3.3V 1.8A 2.5A +5.0V 1.8A 2.5A +5.0V AUX. ±VO2 ● or † Typ. Max./Pk. Volt. 0.5A 5.0V 1.0A/0.2A 12.0V 1.0A/2.0A 0.2A 15.0V 1.0A/2.0A 0.2A 12.0V 1.0A/2.0A 0.2A 15.0V 1.0A/2.0A Symbol: " " OVP built-in. "@" Adjustable. "●" Installed with Post Regulator. "±" Factory set. Remark: (1) At least 20% of typical main output current is required to maintain stated regulation. (2) Peak output, less than 60 sec. with 10% duty cycle. (3) Max. current can't be drawn from all output at the same time. MECHANICAL DIMENSIONS: MM [INCHES] WEIGHT: 100.0 g (3.50 Oz.) INPUT & OUTPUT CONNECTORS PIN ASSIGNMENT AC INPUT ASSIGNMENT AC-LINE AC-NEUTRAL AC-GROUND CONNECTOR P1-L P1-N P1-G &PIN # Mating connector: P1,2 Molex # 5195 or 5239 series. -6- VO1 DUAL OUTPUT VO2 DC COM P2-2,3 P2-4 P2-1