H HiTRON AUTO-RANGING INPUT AC-DC OPEN FRAME SINGLE & MULTI-OUTPUT 100 WATTS INTERNAL SWITCHING POWER SUPPLIES HIH100 & HVI100 SERIES FEATURES: AUTO-RANGING ACCOMMODATE AC SOURCES BOX OR L-BRACKET FORMAT MEET UNIVERSAL SAFETY STANDARDS EMI MEET CISPR PUB. 22 & FCC CLASS B CE MARKING COMPLIANCE SPECIFICATION INPUT SPECIFICATION OUTPUT SPECIFICATION Input Voltage: Auto-ranging 115(90-132) Vac and 230(180-264) VAC. Transient threshold 150Vac typical. (Option for dual input selectable) Input Connector: See Pin assignment. Input Frequency: 47-63Hz. Inrush Current: Typ. 20A@115Vac, 40A@230Vac. Input Current: 2.5A @115Vac, 1.1A @ 230Vac. Dielectric Withstand: Meet IEC 60950-1. EMI: Meet CISPR PUB. 22 & FCC Class B. Hold-up Time: Typ. 22mS @115Vac, 27mS @230Vac. Earth leakage: Typ. 0.5mA @230Vac. Power Fail Signal: Installed. Logic Inhibit: Optional in HIH100-1X and HVI100-2X dual output series. Output Voltage: See Ratings Chart. Output Current: See Ratings Chart. Output Wattage: Typ. 100 watts. Output Connector: See pin assignment. Line Regulation: Typ. 0.1%. Load Regulation: Main VO1 typ. ±1.0%. Aux. VO2 typ. ±2.0%. (Magnetic Amp.) Aux. VO2 typ. ±5.0%. (Stacked-on.) Aux. VO3/VO4 typ. ±1.5%. (P.R.) Noise & Ripple: Typ. 1.0% peak to peak. OVP: Built-in at main VO1. Adjustability: Available at VO1 & VO2. Remote Sense: Optional in HIH100 & HVI100-2X. Overload Protection (OLP): Fully protected against output overload and short circuit. OLP set at about 125-150% rating output wattage. Consult the factory for OLP setting. GENERAL SPECIFICATION Efficiency: Typ. 75%. Switching Frequency: Fixed-frequency at 100K Hz. Circuit Topology: Fixed-frequency forward circuit. Transient Response: Output voltage returns in less than 3ms following a 25% load change. Safety Standard: UL 60950-1/EN 60950-1 Class I. Power Density: 1.56Watts / Cubic Inch. Operating Temperature: 0 to +50°C under forced air flow for full load. Storage Temperature: -20 to +85°C. Temperature Coefficient: Typ. 0.04% /°C. Cooling: Recommended 20cfm cooling fan for full rating load. Construction: Enclosure box or L-bracket format. Note: Due to requests in market and advances in technology, specifications subject to change without notification. For the details of safety approval, please consult the factory. -27- OUTPUT VOLTAGE / CURRENT RATINGS CHART SINGLE OUTPUT MODEL NO. HIH100-10 HIH100-11 HIH100-12 HIH100-13 HIH100-14 HIH100-15 MAIN VO1 @ # Peak Typ. Volt. 20.0A 5V 25.0A 8.3A 12V 11.0A 6.7A 15V 10.0A 4.2A 24V 6.0A 3.6A 28V 5.0A 3.2A 2.2A 36V DUAL OUTPUT MAIN VO1 @ Typ. Volt. 15.0A 5V 10.0A 5V 10.0A 5V 6.0A 5V 4.5A 12V 3.5A 15V 15.0A 5V #◇ Peak 20.0A 15.0A 15.0A 12.0A 6.0A 4.0A 20.0A AUX. VO2 † Typ. Peak Volt. 3.0A +12V 5.0A 3.0A +12V 5.0A 1.5A +24V 2.5A 3.0A +15V 5.0A AUX. ±VO3 Typ. Volt. 0.8A 12V 0.8A 5V 0.8A 12V 0.3A 15V Peak 1.0A 1.0A 1.0A 1.0A AUX. VO2 † Typ. Peak Volt. 2.5A +12V 4.0A 2.5A +12V 4.0A 1.0A +24V 2.0A 2.2A +15V 4.0A AUX. ±VO3 Typ. Volt. 0.8A 12V 0.8A 5V 0.8A 12V 0.6A 12V Peak 1.0A 1.0A 1.0A 1.0A MODEL NO. HVI100-20 HVI100-21 HVI100-22 HVI100-23 HVI100-24 HVI100-25 HVI100-26 AUX. VO2 ◇▲@ Typ. Peak Volt. 6.0A 5.0A 5.0V 6.0A 4.0A 12.0V 4.0A 3.0A 15.0V 3.0A 24.0V 3.0A 4.5A 12.0V 6.0A 4.0A 3.4A 15.0V 6.0A 8.0A 3.3V TRIPLE OUTPUT MODEL NO. HVI100-30 HVI100-31 HVI100-32 HVI100-33 MAIN VO1 @ Peak Typ. Volt. 12.0A +5V 15.0A 15.0A 12.0A +5V 12.0A +5V 15.0A 15.0A 12.0A +5V QUAD OUTPUT MODEL NO. HVI100-40 HVI100-41 HVI100-42 HVI100-43 MAIN VO1 @ Typ. Peak Volt. 12.0A +5V 15.0A 12.0A +5V 15.0A 12.0A +5V 15.0A 12.0A +5V 15.0A AUX. ±VO4 Typ. Volt. 0.5A 12V 0.6A 5V 0.5A 12V 0.4A 15V Peak 1.0A 1.0A 1.0A 1.0A Symbol: " " OVP built-in. "@" Adjustable. "◇" Floating(or isolated) output. "†" Stacked on main output. " " Installed with Post Regulator (P.R.). "＃" Remote sensing. "▲" Installed with magnetic amplifier. "±" Positive or Negative selectable (factory set). Remark: (1) At least 20% of typical main output current is required to maintain stated regulations. (2) Peak output, less than 60sec. with 10% duty cycle. (3) Max. current can't be drawn from all output at the same time. MECHANICAL DIMENSIONS: MM [INCHES] WEIGHT: 860.0g (30.3 Oz.) PIN ASSIGNMENTS: PIN # P1-L P1-N P1-G HIH100 HVI100 HVI100 -1X -2X -3X L L L N N N G G G P2-1 PFS P2-2 -VO1 P2-3 -VO1 P2-4 +VO1 P2-5 +VO1 P2-6 N.A. P2-7 N.A. P2-8 N.A. P3+S + SEN P3- S - SEN P4+I + INHIB P4 -I - INHIB PFS PFS PFS - VO2 VO1 VO1 +VO2 VO1 VO1 +VO1 DC COM. DC COM. - VO1 DC COM. DC COM. N.A. VO2 VO2 N.A. VO3 VO3 N.A. N.C. VO4 + SEN N.A. N.A. - SEN N.A. N.A. + INHIB N.A. N.A. - INHIB N.A. N.A. MATING CONNECTOR: P3 MOLEX 5051 series P4 MOLEX 5051 series. -28- HVI100 -4X L N G