H HiTRON UNIVERSAL INPUT AC-DC MEDICAL & ITE APPLICATION INTERNAL OPEN FRAME SWITCHING POWER SUPPLIES 100 WATTS SINGLE & MULTI-OUTPUT HMI100 SERIES FEATURES: ACCOMMODATE UNIVERSAL AC INPUT COMPACT 4.5”x 2.5”x1.2” PCB FORMAT MEET MEDICAL STANDARD IEC 60601-1 EMI MEET EN55011/EN55022 FCC CLASS B CE MARKING COMPLIANCE SPECIFICATION INPUT SPECIFICATION Input Voltage: 90-264Vac. Input Connector: Molex connector or equivalent. Input Frequency: 47-63Hz. Inrush Current: Typical 9.68Arms at 230Vac. Input Current: Typical 1.8A at 115Vac, 0.9A at 230Vac. Dielectric Withstand: Meet IEC 60601-1/IEC60950-1. EMI: Meet EN55011 & EN55022 / CISPR Class B. Hold-up Time: Typical 12.8mS at 115Vac, Typical 76mS at 230Vac. Earth Leakage Current: Less than 0.189mA at 230Vac. OUTPUT SPECIFICATION Output Voltage: See Ratings Chart. Output Current: See Ratings Chart. Output Connector: Molex connector or equivalent. Output Wattage: Max. 100 Watts. Line Regulation: Typical ±0.5%. Load Regulation: Main VO1 typical ±1%. Aux. VO2 typical ±1%. Aux. VO3/VO4 typical ±5%. Noise & Ripple: Typical 1.0% peak to peak. OVP: Built-in at main output (Latch). Adjustability: Available at VO1 and VO2. Overload Protection (OLP): Fully protected against outputs overload and short circuit. Typical OLP set at 110-150% of rating output power. Consult the factory for OLP setting. GENERAL SPECIFICATION Efficiency: Typical 74-80% (various with output voltage). Switching Frequency: 68 KHz. Circuit Topology: Single-Forward circuit. Multiple-Fixed freq. Flyback circuit. Transient Response: Output voltage returns in less than 14-44mS following a 25% load change. Safety Standard: IEC 60950-1 Class I for IEC use. IEC 60601-1 Class I for Medical use. Operating Temperature: 0 to +50 °C under forced air flow for full load.(Various with output voltage). Storage Temperature: -20 to +85°C. Cooling: Requested 24CFM/600LFM cooling fan for full rating load. Power Density: 7.4 Watts / Cubic Inch. Construction: 4.5”x2.5“x1.2” PCB format. NOTE: (1) All measurements are at nominal input, full load, and +25°C unless otherwise specified. (2) Due to requests in market and advances in technology, specifications subject to change without notification. For the details of safety approval, please consult the factory. -41- OUTPUT VOLTAGE / CURRENT RATINGS CHART SINGLE OUTPUT (under forced air cooling) MAIN +VO1 ★@ Typ. Volt. 16.0A +3.3V 20.0A +5.0V 14.3A +7.0V 11.1A +9.0V 7.5A +12.0V 6.0A +15.0V 5.0A +18.0V 4.1A +24.0V 3.0A +33.0V 2.1A +48.0V MODEL NO. HMI100-S033160 HMI100-S050200 HMI100-S070143 HMI100-S090111 HMI100-S120075 HMI100-S150060 HMI100-S180050 HMI100-S240041 HMI100-S330030 HMI100-S480021 DUAL OUTPUT (under forced air cooling) MAIN +VO1 ★@ Typ. Volt. 12.0A + 5.0V 12.0A +5.0V MODEL NO. HMI100-D050I HMI100-D050K Symbol: "★" OVP built-in AUX. +VO2@ Typ. Volt. 3.0A +12.0V 3.0A +15.0V "@" Adjustable TRIPLE OUTPUT (under forced air cooling) MAIN +VO1 ★@ Typ. Volt. 8.0A +3.3V 8.0A +5.0V 10.0A +5.0V 10.0A +5.0V 10.0A +5.0V 10.0A +5.0V 10.0A +5.0V MODEL NO. HMI100-T033EI HMI100-T050DI HMI100-T050II HMI100-T050IE HMI100-T050KK HMI100-T050KE HMI100-T050MI AUX. +VO2@ Typ. Volt. 7.0A +5.0V 6.0A +3.3V 3.0A +12.0V 3.0A +12.0V 2.5A +15.0V 3.0A +15.0V 1.5A +24.0V AUX. +/-VO3 Typ. Volt. 0.8A +12.0V 0.8A +12.0V 0.8A -12.0V 0.8A -5.0V 0.8A -15.0V 0.8A - 5.0V 0.8A -12.0V AUX. +VO2@ Typ. Volt. 8.0A +5.0V 7.0A +3.3V 3.0A +12.0V 3.0A +15.0V 1.5A +24.0V 1.5A +24.0V AUX. VO3 Typ. Volt. 0.5A +12.0V 0.5A +12.0V 0.8A -12.0V 0.8A -15.0V 0.8A +12.0V 0.8A +15.0V QUAD OUTPUT (under forced air cooling) MAIN +VO1 ★@ Typ. Volt. 7.0A +3.3V 8.0A +5.0V 10.0A +5.0V 10.0A +5.0V 10.0A +5.0V 10.0A +5.0V MODEL NO. HMI100-Q033EII HMI100-Q050DII HMI100-Q050IIE HMI100-Q050KKE HMI100-Q050MII HMI100-Q050MKK MECHANICAL DIMENSIONS: MM [INCHES] AUX. -VO4 Typ. Volt. 0.5A -12.0V 0.5A -12.0V 0.5A -5.0V 0.5A -5.0V 0.5A -12.0V 0.5A -15.0V WEIGHT: 240g (8.11 Oz.) INPUT & OUTPUT CONNECTORS PIN ASSIGNMENT AC INPUT ASSIGNMENT AC-L AC-N AC-G CNTR/PIN# P1-L P1-N G SINGLE DUAL DC DC VO1 VO2 VO1 COM COM VO1 TRIPLE VO2 VO3 P2-1,2 P2-5,6 P2-1,2 P2-5,6 P2-1,2 P2-9,10 P2-9,10 P2-12 P2-3,4 P2-7,8 P2-3,4 P2-7,8 P2-3,4 Mating connector: P1,2 Molex # 5195 or 5239 series. -42- QUAD DC VO1 COM VO3 VO4 DC COM P2-5,6 P2-1,2 P2-9,10 P2-11 P2-7,8 P2-3,4 P2-12 P2-5,6 P2-7,8 VO2