H HiTRON UNIVERSAL INPUT AC-DC INTERNAL OPEN FRAME SWITCHING POWER SUPPLIES 40-50 WATT SINGLE, DUAL & TRIPLE OUTPUT HVI41 SERIES FEATURES: ACCOMMODATE UNIVERSAL AC INPUT SMALL & COMPACT IN SIZE MEET UNIVERSAL SAFETY STANDARDS EMI MEET CISPR PUB. 22 & FCC CLASS B CE MARKING COMPLIANCE SPECIFICATION INPUT SPECIFICATION OUTPUT SPECIFICATION Input Voltage: Range typ. 90-264Vac. Rating 100 to 240Vac. Input Connector: Molex connector or equivalent. Input Frequency: 47-63Hz. Inrush Current: Typical 25.0A at 230Vac. Input Current: Typical 0.7-1.2A at 115Vac. Typical 0.3-0.4A at 230Vac. Dielectric Withstand: Meet IEC 60950-1. EMI: Meet CISPR PUB. 22 & FCC Class B. Hold-up Time: Typical 18mS at 115Vac, Typical 90mS at 230Vac. Leakage Current: Less than 0.3mA at 230Vac. Output Voltage: See Ratings Chart. Output Current: See Ratings Chart. Output Wattage: Typical 40 watts with convection or 50 watts with 20 CFM fan cooling. Output Connector: Molex connector or equivalent. Line Regulation: Typical 0.1%. Load Regulation: Main VO1 typical ± 2.0%. Aux. VO2 typical ± 5.0%(stacked on). VO3 typical ± 3.0%(P.R.). Noise & Ripple: Typical 1.0% peak to peak. OVP: Built-in at main VO1 (Latch). Adjustability: Available at main VO1. Overload Protection (OLP): Fully protected against output overload and short circuit. Consult the factory for OLP setting. GENERAL SPECIFICATION Efficiency: Typical 75-85%. (various with output voltage) Switching Frequency: 60KHz. Circuit Topology: Fixed Frequency Flyback Circuit. Transient Response: Output voltage returns in less than 3mS following a 25% load change. Safety Standard: Meet IEC 60950-1/UL 60950-1 Class I. Operating Temperature: 0 to +50°C. Storage Temperature: -20 to +85°C. Temperature Coefficient: Typ. 0.04% /°C Cooling: Free air convection, or with 20CFM fan cooling. Construction: PCB open frame format. Power Density: 3.0-3.79Watts / Cubic Inch. NOTE: (1)All measurement are at nominal input, full load and +25°C unless otherwise specifications. (2)Due to requests in market and advances in technology, specifications subject to change without notification. For the details of safety approval, please consult the factory. -57- OUTPUT VOLTAGE / CURRENT RATINGS CHART SINGLE OUTPUT MODEL NO. HVI41-10 HVI41-11 HVI41-12 HVI41-13 HVI41-14 HVI41-16 HVI41-19 MAIN VO1 @★ Typ. Fan-C Volt. 8.00A 9.0A 5.0V 3.30A 4.0A 12.0V 2.60A 3.3A 15.0V 1.60A 2.0A 24.0V 1.28A 1.8A 30.0V 0.80A 1.0A 48.0V 8.00A 9.0A 3.3V DUAL OUTPUT MODEL NO. HVI41-20 HVI41-21 HVI41-22 HVI41-23 HVI41-24 HVI41-290 MAIN VO1 @★ Typ. Fan-C Volt. 6.0A 7.0A 5.0V 4.0A 4.5A 5.0V 4.0A 4.5A 5.0V 4.0A 4.5A 5.0V 1.8A 2.0A 12.0V 5.0A 6.0A 3.3V AUX. VO2 † or – VO3 Typ. Fan-C Volt. 2.0A 2.5A 5.0V 2.0A 2.5A 12.0V 1.5A 2.0A 15.0V 1.0A 1.5A 24.0V 1.8A 2.0A 12.0V 1.8A 2.0A 5.0V TRIPLE OUTPUT MODEL NO. HVI41-30 HVI41-31 HVI41-32 HVI41-33 HVI41-33A HVI41-390 HVI41-391 MAIN VO1 @★ Typ. Fan-C Volt. 4.0A 4.5A +5.0V 4.0A 4.5A +5.0V 4.0A 4.5A +5.0V 4.0A 4.5A +5.0V 1.0A 1.5A +5.0V 4.0A 4.5A +3.3V 4.0A 4.5A +3.3V Typ. 2.0A 2.0A 0.5A 1.6A 0.5A 1.8A 1.8A AUX. VO2 † Fan-C Volt. 3.0A +12V 3.0A +12V 1.0A +24V 2.0A +15V 0.8A +15V 2.0A +5V 2.0A +5V Symbol: "" OVP built-in. "@" Adjustable. "†" Stacked on main O/P. Remark: (1) Fan-C: Requested 20CFM fan cooling. Typ. 0.2A 0.2A 0.2A 0.2A 0.5A 0.2A 0.2A AUX. VO3 Fan-C 0.5A 0.5A 0.5A 0.5A 0.8A 0.5A 0.5A Volt. -12V -5V -12V -15V -15V -12V -5V "" Installed with Post Regulator (P.R.). MECHANICAL DIMENSIONS: MM [INCHES] WEIGHT: 169.0g (5.96 Oz.) INPUT & OUTPUT CONNECTORS PIN ASSIGNMENT AC INPUT ACACFASTON LINE NEUTRAL P1- 2 AC-GROUND CONNECTOR & PIN # P1- 1 Mating connector: Molex 5195 or 5239 series. ASSIGNMENT SINGLE OUTPUT DUAL OUTPUT VO1 DC COM VO1 P2-1,2,3 P2-4,5,6 P2-2,3 -58- TRIIPLE OUTPUT VO2 DC COM VO1 VO2 VO3 P2-1 P2-1 P2-6 P2-4,5,6 P2-2,3 DC COM P2-4,5