RS501 thru RS507 REVERSE VOLTAGE FORWARD CURRENT - SILICON BRIDGE RECTIFIERS 50 to 1000 Volts 5.0 Amperes RS5 FEATURES .188(4.8)x45° ●Plastic material used carries UL recognition 94V-0 .886(22.5) .825(21.0) .846(21.5) .807(20.5) ●High surge current capability ●Ideal for printed circuit board ●Built-in printed board stand offs 1.00 MIN. (25.4) .042(1.07) DIA .038(0.97) .400 .354 (10.2) (9.0) .300 .285 (7.6) (7.2) .300 .285 (7.6) (7.2) .365 .345 (9.3) (8.8) .195(5.0) .180(4.6) .295(7.5) .256(6.5) 1.594(40.5) 1.550(39.4) Dimensions in inches and (milimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25℃ ambient temperature unless otherwise specified. resistive or inductive load at 50HZ or 60HZ. CHARACTERISTICS SYMBOL RS501 RS502 RS503 RS504 RS505 RS506 RS507 UNIT Maximum Recurrent Peak Reverse Voltage VRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 400 700 V VDC 50 100 200 400 600 800 1000 V VRRM 100 190 300 600 900 1200 1500 V Maximum DC Blocking Voltage Maximum Repetitive Peak Reverse Voltage (Note1) Maximum Average Forward Output Current IFAVM natuer cooling,TA=45℃ 3.3 C-Load I(A） R+L-Load 2 4.0 A 2 on chassis=31in ,200cm ,TA=45℃ C-Load 5.0 6.0 R+L-Load Maximum Repetitive Peak Forward Surge Current IFSM Peak Forward Surge Current Single @TJ=25℃ Sine-Wave on Reated Load (JEDEC Method) @TJ=150℃ I2t Rating for Fusing (t<8.3ms) @TJ=25℃ @TJ=150℃ @TJ=25℃ Rated Repetitive Peak Voltage @TJ=150℃ Maximum instantaneous Forward Drop per Element at 5.0A Operating Temperature Range Storage Temperature Range A 200 312 I2t Maximum Reservoir Capacitor A 250 IFSM Maximum Series Resistance at VRMS Maximum Reverse Current at 30 APK A2S 200 0.15 0.3 0.6 1.2 1.8 10000 5000 5000 2500 1000 OHM uF 10.0 μA 6.0 mA VF 1.0 V TJ -55 to+125 ℃ TSTG -55 to+150 ℃ IR NOTES:1.Valid for each bridge element. ~ 366 ~ RATING AND CHARACTERTIC CURVES RS501 thru RS507 FIG.1-DERATING CURVE FOR OUTPUT RECTIFIED CURRENT FIG.2- DERATING CURVE FOR OUTPUT RECTIFIED CURRENT 6.0 4.0 AVERAGE FORWARD CURRENT AMPERES AVERAGE FORWARD CURRENT AMPERES 5.0 RESISTIVE 3.0 CAPACITIVE LOAD 2.0 LIMITING COOLING MEDIUM 1.0 TEMPERATURE T A AT NATURE COOLING WITHOUT HEATSINK 0 0 50 100 150 RESISTIVE LOAD 5.0 RESISTIVE LOAD 4.0 3.0 2.0 1.0 0 0 50 FIG.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTIC PER BRIDGE ELEMENT 40 20 10 6.0 4.0 2.0 0.2 TYPICAL CHARACTERISTIC LIMITING CHARACTERISTIC 150℃ 0.1 0.5 25℃ 0.6 0.7 0.8 0.9 1.0 1.1 150 FIG.4-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 100 1.0 0.6 0.4 100 CASE TEMPERATURE ℃ PEAK FORWARD SURGE CURRENT, AMPERES INSTANTANEOUS FORWARD CURRENT, AMPERES AMBIENT TEMPERATURE ℃ 1.2 1.3 1.4 1.5 100 0.2 60 0.4 40 0.6 0.8 20 1 10 8 6 4 T A=45℃ SINGLE SINE-WAVE JEDEC METHOD 2 0 10 20 40 60 100200 400 1 2 4 6 10 20 40 1 2 4 6 10 20 40 1h ms INSTANTANEOUS FORWARD VOLTAGE,VOLTS sec min TIME 16 16 POWER DISSIPATION,WATTS FORWARD POWER DISSIPATION, WATTS FIG.5-MAXIMUM TOTAL BRIDGE POWER DISSIPATION 14 12 10 CAPACITIVE LOAD 8 6 RESISTIVE LOAD 4 2 0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 FIG.6-MEAN AVERAGE FORWARD CURRENT CASE TEMPERATURE 120 125 130135 9.0 10 AVERAGE FORWARD OUTPUT CURRENT,AMPERES ~ 367 ~ 14 5 RESISTIVE LOAD 12 10 10 15 20 8 CAPACITIVE LOAD 6 4 THERMAL RESISTANCE, CASE TO COOLINT MEDIUM RUCA ［℃/W］ 2 0 2 4 6 8 20 40 60 80 100 120 140 160 AVERAGE FORWARD CURRENT AMBIENT TEMPERATURE