RS5 SERIES REVERSE VOLTAGE FORWARD CURRENT - SILICON BRIDGE RECTIFIERS 50 to 1000 Volts 5.0 Amperes RS5 FEATURES .188(4.8)x45° ●Plastic material used carries UL recognition 94V-0 .886(22.5) .825(21.0) .846(21.5) .807(20.5) ●High surge current capability ●Ldeal for printed circuit board ●Typical IR less than 1mA ●Built-in printed board stand offs 1.00 MIN. (25.4) .042(1.07) DIA .038(0.97) ●High temperature soldering guaranteed: 250℃ for 5 seconds .400 .354 (10.2) (9.0) .300 .285 (7.6) (7.2) .300 .285 (7.6) (7.2) .365 .345 (9.3) (8.8) .195(5.0) .180(4.6) .295(7.5) .256(6.5) 1.594(40.5) 1.550(39.4) Dimensions in inches and (milimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25℃ ambient temperature unless otherwise specified. resistive or inductive load at 50HZ or 60HZ. CHARACTERISTICS SYMBOL RS501 RS502 RS503 RS504 RS505 RS506 RS507 UNIT Maximum Recurrent Peak Reverse Voltage VRM 60 125 200 400 600 800 1000 V Maximum RMS Voltage VRMS 40 80 125 250 380 500 630 V VDC 65 125 200 400 600 800 1000 V VRRM 100 190 300 600 900 1200 1500 V Maximum DC Blocking Voltage Maximum Repetitive Peak Reverse Voltage (Note1) Maximum Average Forward Output Current IFAVM natuer cooling,TA=45℃ 3.3 C-Load I(A） R+L-Load 4.0 on chassis=31in2 ,200cm2 ,TA=45℃ C-Load 5.0 6.0 R+L-Load Maximum Repetitive Peak Forward Surge Current IFSM Peak Forward Surge Current Single @TJ=25℃ Sine-Wave on Reated Load (JEDEC Method) @TJ=150℃ I2t Rating for Fusing (t<8.3ms) A @TJ=25℃ @TJ=150℃ 30 APK A 250 IFSM APK 200 312 I2t A2S 200 Maximum Series Resistance at VRMS 0.15 0.3 0.6 1.2 1.8 OHM Maximum Reservoir Capacitor 10000 5000 5000 2500 1000 uF Maximum Reverse Current at @TJ=25℃ Rated Repetitive Peak Voltage @TJ=150℃ Maximum instantaneous Forward Drop 10.0 uA 6.0 mA VF 1.0 V TJ,TSTG -55 to +125 ℃ IR per Element at 5.0A Operating and Storage Temperature Range NOTES:1.Valid for each bridge element. ~ 269 ~ RATING AND CHARACTERTIC CURVES RS5 SERIES FIG.1-DERATING CURVE FOR OUTPUT RECTIFIED CURRENT FIG.1- DERATING CURVE FOR OUTPUT RECTIFIED CURRENT 6.0 4.0 AVERAGE FORWARD CURRENT AMPERES AVERAGE FORWARD CURRENT AMPERES 5.0 RESISTIVE 3.0 CAPACITIVE LOAD 2.0 LIMITING COOLING MEDIUM 1.0 TEMPERATURE T A AT NATURE COOLING WITHOUT HEATSINK 0 0 50 100 150 RESISTIVE LOAD 5.0 RESISTIVE LOAD 4.0 3.0 2.0 1.0 0 0 50 AMBIENT TEMPERATURE ℃ FIG.4-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT, AMPERES INSTANTANEOUS FORWARD CURRENT, AMPERES 100 40 2 0 10 6.0 4.0 2.0 0.2 TYPICAL CHARACTERISTIC LIMITING CHARACTERISTIC 150℃ 0.1 0.5 0.6 25℃ 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 100 0.2 60 0.4 40 0.6 0.8 20 1 10 8 6 4 T A=45℃ SINGLE SINE-WAVE JEDEC METHOD 2 0 10 20 40 60 100200 400 1 2 4 6 10 20 40 1 2 4 6 10 20 40 1h ms 1.5 sec FIG.6-MEAN AVERAGE FORWARD CURRENT CASE TEMPERATURE 120 125 130135 16 16 POWER DISSIPATION,WATTS FORWARD POWER DISSIPATION, WATTS FIG.5-MAXIMUM TOTAL BRIDGE POWER DISSIPATION 14 12 10 CAPACITIVE LOAD 6 RESISTIVE LOAD 4 14 5 RESISTIVE LOAD 12 10 10 15 20 8 CAPACITIVE LOAD 6 4 THERMAL RESISTANCE, CASE TO COOLINT MEDIUM RUCA ［℃/W］ 2 2 0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 min TIME INSTANTANEOUS FORWARD VOLTAGE,VOLTS 8 150 CASE TEMPERATURE ℃ FIG.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTIC PER BRIDGE ELEMENT 1.0 0.6 0.4 100 10 AVERAGE FORWARD OUTPUT CURRENT,AMPERES ~ 270 ~ 0 2 4 6 8 20 40 60 80 100 120 140 160 AVERAGE FORWARD CURRENT AMBIENT TEMPERATURE