CLD240 Series ® UPGRADED SERIES Silicon PIN Photodiodes Clairex Technologies, Inc. CLD240 replaces CLD142 and CLD142R CLD240E replaces CLD140 CLD240W replaces CLD141 and CLD141R features • TO-46 header with three lens options • cathode connected to case • large photosensitive area • usable for visible through near-IR May, 2005 description The CLD240 series are new, direct replacements for the older CLD140 series and feature larger (0.060” x 0.060”) active area silicon PIN photodiode chips. Also featured are faster switching and lower junction capacitance. Three different lensing options are offered which satisfy the majority of application requirements. Contact Clairex for other packaging options. 0.158 (4.01) 0.136 (3.45) 0.100 (2.54) dia. 1.00 (25.4) min. 0.210 (5.33) 0.190 (4.83) 0.215 (5.46) 0.205 (5.21) CATHODE 0.190 (4.83) 0.176 (4.47) ANODE 0.025 (0.64) max. 0.050 (1.27) 0.030 (0.76) 0.147 (3.73) 0.137 (3.48) 0.019 (0.48) 0.016 (0.41) CLD240 0.130 (3.30) max 0.213 (5.41) 0.207 (5.26) 1.00 (25.4) min. 0.050 (1.27) max 0.100 (2.54) pin circle CATHODE 0.169 (4.29) 0.163 (4.14) ANODE 0.010 (0.25) nom 0.147 (3.73) 0.137 (3.48) 0.019 (0.48) 0.016 (0.41) C 5 CLD240E 0.165 (4.19) 0.145 (3.68) 0.156 (3.96) 0.136 (3.45) 0.100 (2.54) dia. 1.00 (25.4) min. 0.215 (5.46) 0.205 (5.21) CATHODE 0.190 (4.83) 0.176 (4.47) ANODE 0.025 (0.64) max. 0.019 (0.48) 0.016 (0.41) 0.010 (0.25) max 0.147 (3.73) 0.137 (3.48) CLD240W ALL DIMENSIONS ARE IN INCHES (MILLIMETERS) Clairex reserves the right to make changes at any time to improve design and to provide the best possible product. Clairex Technologies, Inc. Phone: 972-265-4900 1301 East Plano Parkway Fax: 972-265-4949 Revised 3/15/06 Plano, Texas 75074-8524 www.clairex.com CLD240 Series ® Silicon PIN Photodiodes Clairex Technologies, Inc. absolute maximum ratings (TA = 25°C unless otherwise stated) storage and operating temperature CLD240 and CLD240W .............................................................-65°C to +150°C CLD240E....................................................................................-40°C to +125°C lead soldering temperature(1) ......................................................................... 260°C reverse voltage..................................................................................................60V note: 1. 0.06” (1.5mm) from the header for 5 seconds maximum. electrical characteristics (TA = 25°C unless otherwise noted) symbol parameter CLD240 Series min typ max units Junction capacitance Breakdown voltage Output rise and fall time 60 - 14 15 10 10 20 nA nA pF V ns Short-circuit current(2) Total angle at half sensitivity points 30 - 40 14 - µA deg. VBIAS = 0V Short-circuit current(2) Total angle at half sensitivity points 10 - 13 80 - µA deg. VBIAS = 0V ISC Short-circuit current(2) θHP Total angle at half sensitivity points note: 2. Ee = 1mW/cm2, λ = 850nm. 10 - 13 70 - µA deg. VBIAS = 0V ID Dark current CJ VBR tr, tf CLD240 ISC θHP CLD240E ISC θHP test conditions VR = 20V, Ee = 0 VF = 100mV, Ee = 0 VBIAS = 0V, f = 1MHz, Ee = 0 IR = 30µA, Ee = 0 RL = 1KΩ CLD240W Clairex reserves the right to make changes at any time to improve design and to provide the best possible product. Clairex Technologies, Inc. Phone: 972-265-4900 1301 East Plano Parkway Fax: 972-265-4949 Plano, Texas 75074-8524 www.clairex.com