CLE332 Series ® 850nm Point Source Emitters Clairex Technologies, Inc. February, 2005 0.165 (4.19) 0.145 (3.68) 0.156 (3.96) 0.136 (3.45) 0.100 (2.54) dia. 1.00 (25.4) min. 0.215 (5.46) 0.205 (5.21) ANODE 0.190 (4.83) 0.176 (4.47) CATHODE 0.025 (0.64) max. 0.147 (3.73) 0.137 (3.48) 0.019 (0.48) 0.016 (0.41) 0.050 (1.27) nom CLE332 0.213 (5.41) 0.207 (5.26) 1.00 (25.4) min. 0.130 (3.30) max 0.050 (1.27) max 0.100 (2.54) pin circle ANODE 0.169 (4.29) 0.163 (4.14) CATHODE 0.010 (0.25) nom 0.019 (0.48) 0.016 (0.41) 0.147 (3.73) 0.137 (3.48) C 6 CLE332E 0.100 (2.54) dia. 1.00 (25.4) min. 0.156 (3.96) 0.136 (3.45) 0.165 (4.19) 0.145 (3.68) 0.215 (5.46) 0.205 (5.21) ANODE 0.190 (4.83) 0.176 (4.47) CATHODE 0.025 (0.64) max. 0.010 (0.25) max ALL DIMENSIONS ARE IN INCHES (MILLIMETERS) 0.019 (0.48) 0.016 (0.41) 0.147 (3.73) 0.137 (3.48) CLE332W Clairex reserves the right to make changes at any time to improve design and to provide the best possible product. Clairex Technologies, Inc. Phone: 972-265-4900 1301 East Plano Parkway Fax: 972-265-4949 Revised 3/15/06 Plano, Texas 75074-8524 www.clairex.com CLE332 Series ® 850nm Point Source Emitters features • TO-46 header with three lens options • cathode connected to case • high power output • different package styles provide flexible design options description The CLE332 series of products feature AlGaAs, 850nm, point source chips. Three different lens options are offered which satisfy the majority of application requirements. Contact Clairex for other package options. Clairex Technologies, Inc. absolute maximum ratings (TA = 25°C unless otherwise stated) storage temperature CLE332 and CLE332W..............................................................-65°C to +150°C CLE332E....................................................................................-40°C to +125°C operating temperature CLE332 and CLE332W ..............................................................-65°C to +125°C CLE332E....................................................................................-40°C to +100°C lead soldering temperature(1)......................................................................... 260°C (2) continuous forward current ..........................................................................50mA peak forward current (1.0ms pulse width, 10% duty cycle)..................................1A reverse voltage....................................................................................................5V continuous power dissipation(3) ...................................................................200mW notes: 1. 0.06” (1.5mm) from the header for 5 seconds maximum 2. Derate linearly 0.40mA/°C from 25°C free air temperature to TA = +125°C. 3. Derate linearly 1.60mW/°C from 25°C free air temperature to TA = +125°C. 4. These devices are sensitive to transients. Use series resistors or power supply load resistors when applying power. electrical characteristics (TA = 25°C unless otherwise noted) symbol parameter CLE332 Series min typ max units 840 - 1.8 850 40 2.0 10 860 - V µA nm nm - 10 - ns Total output power Irradiance Emission angle at half power points 1.5 225 - 2.0 15 - mW µW/cm2 deg. IF = 50mA IF = 50mA IF = 50mA Total output power Emission angle at half power points 3.5 - 4.5 135 - mW deg. IF = 50mA IF = 50mA Total output power Emission angle at half power points 1.5 - 2.0 80 - mW deg. IF = 50mA IF = 50mA VF IR λp BW Forward voltage Reverse current Peak wavelength Spectral bandwidth tr, tf Output rise and fall time test conditions IF = 50mA VR = 5V IF = 50mA IF = 50mA IF = 50mA, 10% - 90% 5mA prebias CLE332 PO Ee θHP CLE332E PO θHP CLE332W PO θHP Clairex reserves the right to make changes at any time to improve design and to provide the best possible product. Clairex Technologies, Inc. Phone: 972-265-4900 1301 East Plano Parkway Fax: 972-265-4949 Plano, Texas 75074-8524 www.clairex.com