Series RPC Solid State Proportional Controller 15-40 Amp, 120/240/480 Vac Output • Uses Potentiometer for Economical Pow er Control • Industry Standard Package 8 MODEL NUMBERS RPC1215 RPC1225 RPC1240 The RPC series proportional controllers provide a cost effective method of controlling power in many different applications such as heaters, universal motors or incandescent lamps. A customer provided potentiometer is all that is required for control. All modules are supplied with KS100 protective cover. RPC2415 RPC2425 RPC2440 RPC4815 RPC4825 RPC4840 200-240 200-240 200-240 400-480 400-480 400-480 OUTPUT SPECIFICATIONS ➀ 90-130 90-130 90-130 Max. Load Current ➂ [Arms] 15 25 40 15 25 40 15 25 40 Min. Load Current, [mArms] 70 80 90 70 80 90 70 80 90 Transient Overvoltage [Vpk] 400 400 400 600 600 600 1200 1200 1200 Max. Surge Current, (16.6ms) [Apk] 150 250 625 150 250 625 150 250 625 Max. On-State Voltage Drop @ Rated Current [Vpk] 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 Thermal Resistance Junction to Case [RθJC] 1.48 1.02 .63 1.48 1.02 .63 1.48 1.02 .63 94 260 1620 94 260 1620 94 260 1620 Max. Off-State Leakage Current @ Rated Voltage [mArms] 10 10 10 7 7 7 3 3 3 Min. Off-State dv/dt @ Max. Rated Voltage [V/µsec]➁ 500 500 500 500 500 500 500 500 500 Operating Voltage (47-63 Hz) [Vac] Maximum I2 t for Fusing, (8.3 msec.) [A2sec] Max. Turn-On Time ➃ [msec] Max. Turn-Off Time [msec] Power Factor (Min.) with Max. Load 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 Snubber (Internal) yes yes yes yes yes yes no no no INPUT SPECIFICATIONS ➀ Resistor, Variable [Ohms] ➃ 150K (1W) 150K (1W) 150K (1W) 1M (1/2W) 1M (1/2W) 1M (1/2W) 1M (1/2W) 1M (1/2W) 1M (1/2W) ©2002 CRYDOM CORP, Specifications subject to change without notice. GENERAL NOTES ➀ All parameters at 25˚C unless otherwise specified. ➁ Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 ➂ Heat sinking required, for derating curves see page 2. ➃ Potentiometer should be selected with regards to line voltage isolation. W ARNING Control to load is not isolated, excercise care in handling the RPC products to avoid the risk of electric shock. FastFax Document No. 205 SERIES RPC. Rev. 041902 PAGE 1 OF 2 For recommended applications and more information contact: USA: Sales Support (877) 502-5500 Tech Support (877) 702-7700 FAX (619) 710-8540 Crydom Corp, 2320 Paseo de las Americas, Ste. 201, San Diego, CA 92154 Email: [email protected] WEB SITE: http://www.crydom.com UK: +44 (0)1202 365070 • FAX +44 (0)1202 365090 Crydom International Ltd., 7 Cobham Road, Ferndown Industrial Estate, Ferndown, Dorset BH21 7PE, Email: [email protected]. GERMANY: +49 (0)180 3000 506 Series RPC Solid State Proportional Controller 15-40 Amp, 120/240/480 Vac Output GENERAL SPECIFICATIONS Dielectric Strength, All Terminals to Base 2500 Vrms Ambient Operating Temperature Range -30 to 80˚C Ambient Storage Temperature Range -40 to 125˚C M ECHANICAL SPECIFICATIONS Weight: (typical) 3.2oz. (90g) Encapsulation: Thermally Conductive Epoxy Screws and Saddle Clamps Furnished, Unmounted Terminals: ~ W IRING DIAGRAM 1.10 (27.9) .45 (11.4) MOUNTING HOLE/SLOT 0.17 (4.3) DIA. 8-32 TERMINAL (2 PLACES ) CAUTION 1 2 PROPORTIONAL CONTROLLER 4 All dimensions are in inches (millimeters) All terminals are at Line Voltage Potential. 1 OUTPUT 2 1.87 (47.5) 4 3 INPUT 2.30 (58.4) 1.70 (43.2) 3 1.00 (25.4) 1.80 (45.7) Variable Resistance Screw Torque Requirements: 6-32 Screws - 10 in. lbs., 8-32 and 10-32 Screws - 20in. lbs. (Screws dry without grease.) .78 (19.8) .87 (22.1) 6-32 TERMINAL (2 PLACES) CURRENT DERATING CURVES 25A 15 NO HEATSINK 5 120 100 3˚C/W 2˚C/W 20 15 110 10 NO HEATSINK 5 3 6 9 12 Load Current [Arms] 15 20 40 60 1˚C/W .5˚C/W 40 80 5 10 15 20 25 Load Current [Arms] 20 40 60 100 2˚C/W 110 20 120 NO HEATSINK 0 Max Ambient Temp. [˚C] 90 1.5˚C/W 120 124 0 Power Dissipation 116 60 Base Plate Temp [˚C] 6˚C/W 25 Power Dissipation 10 95 1˚C/W 112 4˚C/W Base Plate Temp [˚C] 2˚C/W Power Dissipation 40A 30 Base Plate Temp [˚C] 15A 0 80 10 Max Ambient Temp. [˚C] 20 30 40 Load Current [Arms] 50 20 40 60 80 Max Ambient Temp. [˚C] PERCENTAGE ON vs . INPUT RESISTANCE RPC2415, RPC2425, RPC2440 RPC4815, RPC4825, RPC4840 100 100 80 80 80 60 40 Percentage ON 100 Percentage ON Percentage ON RPC1215, RPC1225, RPC1240 60 40 50 Hz 20 0 50 Hz 20 60 Hz 40 60 80 100 Input Resistance [k ] 120 140 60 Hz 0 0 20 40 50 Hz 20 60 Hz 0 60 0 200 400 600 800 Input Resistance [k ] 1000 1200 0 200 400 600 800 1000 1200 Input Resistance [k ] ©2002 CRYDOM CORP, Specifications subject to change without notice. FastFax Document No. 205 SERIES RPC. Rev. 041902 PAGE 2 OF 2 For recommended applications and more information contact: USA: Sales Support (877) 502-5500 Tech Support (877) 702-7700 FAX (619) 710-8540 Crydom Corp, 2320 Paseo de las Americas, Ste. 201, San Diego, CA 92154 Email: [email protected] WEB SITE: http://www.crydom.com UK: +44 (0)1202 365070 • FAX +44 (0)1202 365090 Crydom International Ltd., 7 Cobham Road, Ferndown Industrial Estate, Ferndown, Dorset BH21 7PE, Email: [email protected]. GERMANY: +49 (0)180 3000 506