Series DC60 3-7Amp • 60 Vdc • DC Output • Cost Effective • Industry Standard Package • AC or DC Control • Panel Mount MODEL NUMBERS Bipolar transistor outputs are available in 3, 5 and 7 amp ratings. Cost-effective relays offer 4000 Volt isolation and come in Crydom's standard panelmount package. Manufactured in Crydom’s ISO 9002 Certified facility for optimum product performance and reliability. DC CONTROL AC CONTROL DC60S3 DC60S5 DC60S7 DC60SA3 DC60SA5 DC60SA7 Operating Voltage Range [Vdc] 3-60 3-60 3-60 3-60 3-60 3-60 Load Current Range➁ [Adc] .02-3 .02-5 .02-7 .02-3 .02-5 .02-7 6 10 14 6 10 14 Max. On-State Voltage Drop @ Rated Current [Vdc] 1.3 1.5 1.7 1.3 1.5 1.7 Thermal Resistance Junction to Case (RØJC) [˚C/W] 2.2 2.2 2.2 2.2 2.2 2.2 Max. Off-State Leakage Current @ Rated Voltage [mA] 0.1 0.1 0.1 0.1 0.1 0.1 Max. Turn-On Time [msec] 0.1 0.1 0.1 10 10 10 Max. Turn-Off Time [msec] 0.3 0.3 0.3 40 40 40 OUTPUT SPECIFICATIONS ➀ Max. Surge Current, (1 sec) [Adc] INPUT SPECIFICATIONS ➀ DC CONTROL AC CONTROL Control Voltage Range 3.5-32 Vdc 90-280 Vrms Max. Turn-On Voltage 3.5 Vdc 90 Vrms Min. Turn-Off Voltage 1.0 Vdc 10 Vrms 1500 Ohms 60K Ohms 2.2mA @ 5 Vdc 2mA @ 120 Vrms, 4mA @ 240 Vrms Nominal Input Impedence Typical Input Current GENERAL NOTES ➀ ➁ ©1998 CRYDOM CORP, Specifications subject to change without notice. All parameters at 25ºC unless otherwise specified. Heat sinking required, for derating curves see page 2. FastFax Document No. 163 SERIES DC60.032698, PAGE 1 OF 2 For recommended applications and more information contact: USA: (800) 8 CRYDOM • (800) 827-9366 • (619) 715-7200 • fax (619) 715-7280 Crydom Corp, 9525 Chesapeake Drive, San Diego, CA 92123 • e-mail: [email protected] WEB SITE: http://www.crydom.com FASTFAX Product Information: (888) 267-9191 UK: (44)1202 812300 • fax (44)1202 812340 Crydom International Ltd., 85, Condor Close, Woolsbridge Industrial Estate, Three-Legged Cross. Wimborne, Dorset, England BH21 6SU GERMANY: (49) (0)6874 182580 • fax (49)(0)6874 182585 Crydom GmbH, Gewerbegebiet Im Schachen, D-66687 Nunkirchen, Germany • e-mail: [email protected] Series DC60 3-7Amp • 60 Vdc • DC Output GENERAL SPECIFICATIONS Dielectric Strength 50/60Hz (input/output/base) 4000 Vrms 109 Ohm Insulation Resistance (Min.) @ 500 Vdc Max. Capacitance Input/Output 8 pF Ambient Operating Temperature Range -30 to 80ºC Ambient Storage Temperature Range -30 to 125ºC MECHANICAL SPECIFICATIONS Weight: (typical) 3.0 oz. (86.5g) Encapsulation: Thermally Conductive Epoxy Terminals: 4 1.10 (27.9) .45 (11.4) MOUNTING HOLE/SLOT 0.17 (4.3) DIA. Input and output polarity must be observed. Inductive loads must be diode suppressed. 8-32 TERMINAL (2 PLACES ) All dimensions are in inches (millimeters) 1 (+) INPUT LOAD OUTPUT AC CONTROL MODELS PIN 3: AC CONTROL PIN 4: AC CONTROL DC CONTROL MODELS PIN 3 : + DC CONTROL PIN 4: -- DC CONTROL Screws and Saddle Clamps Furnished, Unmounted SSR 3 + 1.87 (47.5) (+) (–) 2 (--) -- OUTPUT 1 2 SOLID-STATE RELAY 4 3 -- 2.30 (58.4) 1.70 (43.2) Screw Torque Requirements: 6-32 Screws - 10 in./lbs., 8-32 and 10-32 Screws - 20in./lbs. (Screws dry without grease.) + INPUT Transient Protection All loads are inductive, even ones that are not so labeled. An inductive load will produce harmful transient voltages when it is turned off. Diodes should be fast recovery type with PIV rated greater than supply voltage. 1.00 (25.4) 1.80 (45.7) 6-32 TERMINAL (2 PLACES) CURRENT DERATING CURVES 3A 5A 12 105 NO HEAT SINK 110 115 4 Power Dissipation 7.5ºC/W 8 2ºC/W Base Plate Temp [ºC] Power Dissipation 100 7.5ºC/W 5ºC/W 100 105 8 NO HEAT SINK 110 115 4 120 Base Plate Temp [ºC] 12 .78 (19.8) .90 (22.9) 120 0 0 1 1.5 2 Load Current [Arms] 2.5 3 20 40 60 80 100 1 Max Ambient Temp. [ºC] 2 3 4 5 Load Current [Arms] 20 40 60 80 100 Max Ambient Temp. [ºC] 7A 7.5ºC/W 5ºC/W 100 105 8 NO HEAT SINK 110 115 4 Base Plate Temp [ºC] 2ºC/W Power Dissipation Crydom Heat Sinks offer excellent thermal management and are perfectly matched to the load current ratings of Crydom panel mount relays. Request Crydom’s Heat Sink specification sheet for all the details. 12 120 0 1 2 3 4 5 Load Current [Arms] FastFax Document No. 163 SERIES DC60.032698, PAGE 2 OF 2 6 7 20 40 60 80 100 Max Ambient Temp. [ºC] ©1998 CRYDOM CORP, Specifications subject to change without notice. For recommended applications and more information contact: USA: (800) 8 CRYDOM • (800) 827-9366 • (619) 715-7200 • fax (619) 715-7280 Crydom Corp, 9525 Chesapeake Drive, San Diego, CA 92123 • e-mail: [email protected] WEB SITE: http://www.crydom.com FASTFAX Product Information: (888) 267-9191 UK: (44)1202 812300 • fax (44)1202 812340 Crydom International Ltd., 85, Condor Close, Woolsbridge Industrial Estate, Three-Legged Cross. Wimborne, Dorset, England BH21 6SU GERMANY: (49) (0)6874 182580 • fax (49)(0)6874 182585 Crydom GmbH, Gewerbegebiet Im Schachen, D-66687 Nunkirchen, Germany • e-mail: [email protected]