T-1-3/4, PCB Indicator Assembly G66S and G67S Series The G66S and G67S series of PCB indicators are designed for direct viewing. 3.5±.5 6.1 6.1 5.0±.5 6.2 + 4.7 + 4.8 + 3.5 min 3.5 min 3.2 6.2 G66S G67S 2.54 + 2.54 Recommended Hole Pattern Rear view Specify part desired as follows: G66S/ or G67S/Order Code. Please note the G66S series is not available with a built in resistor. ORDER CODE AND INFORMATION (ALL RATINGS AT 25°C AMBIENT) LED Lamp Epoxy & Type TInted Diffused Resistor Required Tinted Transparent High Brightness Tinted Diffused For 2mA Operation Tinted Diffused 5V Operation Tinted Diffused 12V Operation White Diffused Bipolar, Bicolor Typical Characteristics Color Order Code Red H Peak Vf (V) Iv (mcd) 2Θ1/2 λ (nm) @If=20mA @If=10mA (Deg) Recom. Op. If (mA) 697 2.1 2.0 36 5-10 Hi Eff Red I 635 2.0 9.0 36 10-20 Green G 565 2.1 9.0 36 10-20 Yellow Y 585 2.0 7.0 36 10-20 Hi Eff Red IT 635 2.0 30 16 10-20 Green GT 565 2.1 30 16 10-20 Yellow YT 585 2.0 28 16 10-20 Red H2 697 2.0 1.6 @ 2mA 36 2-10 Hi Eff Red I2 635 2.1 2.0 @ 2mA 36 2-10 Green G2 565 2.0 2.0 @ 2mA 36 2-10 Yellow Y2 585 2.0 2.0 @ 2mA 36 2-10 Hi Eff Red I5 635 - 4.5 36 5V Green G5 565 - 4.5 36 5V Yellow Y5 585 - 4.5 36 5V Hi Eff Red IB 635 - 4.5 36 12 V Green GB 565 - 4.5 36 12 V Yellow YB 585 - 4.5 36 12 V Hi Eff Red/Grn EG 635/565 2.1/2.0 2.5/2.5 54 10-20 Yellow/Green YG 585/565 2.1/2.0 2.5/2.5 54 10-20 Red/Green SG 660/570 1.8/2.2 6.0/2.5 - 10-20 * Specifications subject to change without notice. Dimensions are in mm±0.25 unless stated otherwise. IDEA, Inc., 1351 Titan Way, Brea, CA 92821 Ph:714-525-3302, 800-LED-IDEA; Fax: 714-525-3304 Catalog 995A A-36