T-1 (3 mm) Panel Mount LED Indicator G33M and G35M Series www.ledidea.com The G33M and G35M series of indicators are made of chrome-plated brass. Any of IDEA's standard T-1 lamps may be used. These assemblies are furnished with matching lock washer and nut. Recommended for panels up to 3 mm (1/8”) thick. Recommended hole size is 6 mm (or 15/64”). For the convenience of OEM users, IDEA can furnish both of these series with wires attached. Black plating is also available on special order to high volume users. 3.0Ø G33M 8.0 Anode 13 max 2.5 3.0Ø G35M 8.0 Anode 3 12 max Specify part desired as follows: (X = total number of LEDs in array, and may be up to 8 maximum.) G33M/Order Code or G35M/Order Code For example: “G33M/G” designates an assembly with a green LED. ORDER CODE AND INFORMATION (ALL RATINGS AT 25°C AMBIENT) LED Lamp Epoxy & Type TInted Diffused Resistor Required Tinted Transparent High Brightness Tinted Diffused For 2mA Operation Tinted Diffused 5V Operation White Diffused Bipolar, Bicolor Typical Characteristics Peak Vf (V) Iv (mcd) 2Θ1/2 (Deg) Recom. Op. If (mA) Color Order Code λ (nm) @If=20mA @If=10mA Hi Eff Red I 635 2.0 10 60 10-20 Green G 565 2.1 10 60 10-20 Yellow Y 585 2.0 10 60 10-20 Orange O 610 2.0 10 60 10-20 Hi Eff Red IT 635 2.0 40 40 10-20 Green GT 565 2.1 40 40 10-20 Yellow YT 585 2.0 40 40 10-20 Hi Eff Red I2 635 2.0 1.0 @ 2mA 60 2-10 Green G2 565 2.1 1.0 @ 2mA 60 2-10 Yellow Y2 585 2.0 1.0 @ 2mA 60 2-10 Hi Eff Red I5 635 - 10 60 5V 5V Green G5 565 - 10 60 Yellow Y5 585 - 10 60 5V Red/Green EG 635/565 2.0/2.1 4/4 90 10-20 Yellow/Green YG 585/565 2.0/2.1 4/4 90 10-20 Red/Yellow EY 635/585 2.0/2.0 4/4 90 10-20 * Specifications subject to change without notice. Dimensions are in mm±0.25 unless stated otherwise. IDEA, Inc., 1351 Titan Way, Brea, CA 92821 Ph:714-525-3302, 800-LED-IDEA; Fax: 714-525-3304 2005G