IDEA G107B

Rectangular LED Indicator, Right-angle, PCB Mount
G107B Series
The G107B is made up of a 2.4 x 7.1 mm rectangular LED lamps assembled into a black plastic holder. The leads are formed at right
angles to the light-emitting face of the lamp for through hole mounting on PCBs. The design of the G107B holder orients the lamp such
that the long dimension is perpendicular to the plane of the PCB. The holder is also provided with a split pin to add stability to the assembly during wave soldering.
3.7
7.2
1.8±.5
10.3
5.1
4.9
2.5
3.5 min
2.2
7.4
10.7
2.6
12.3
-– +
(typ for single color)
Specify part desired as follows:
G107B/Order Code
For example:
“G107B/G” designates an assembly with a green LED.
ORDER CODE AND INFORMATION (ALL RATINGS AT 25°C AMBIENT)
LED Lamp
Epoxy & Type
Tinted Diffused
Resistor Required
Color
Typical Characteristics
Order Code
Peak
Vf (V)
Iv (mcd)
2Θ1/2
λ (nm)
@If=20mA
@If=10mA
(Deg)
Recom.
Op. If
(mA)
Hi Eff Red
I
635
2.0
13
124
10-20
Green
G
565
2.1
8.5
124
10-20
Yellow
Y
585
2.0
9.4
124
10-20
* Specifications subject to change without notice. Dimensions are in mm±0.25 unless stated otherwise.
IDEA, Inc., 1351 Titan Way, Brea, CA 92821 Ph:714-525-3302, 800-LED-IDEA; Fax: 714-525-3304 Catalog 995A
A-45