3.5 x2.8mm SMD CHIP LED LAMP Part Number: APED3528YC Description Features zSINGLE The Yellow source color devices are made with Gallium COLOR. zSUITABLE FOR ALL SMT ASSEMBLY AND SOLDER FOR BACKLIGHTING. zAVAILABLE ON TAPE AND REEL. zPACKAGE: 500PCS / REEL. zMOISTURE SENSITIVITY LEVEL : LEVEL 3. zRoHS Arsenide Phosphide on Gallium Phosphide Yellow Light Emitting Diode. PROCESS. zIDEAL YELLOW COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAD1060 REV NO: V.2 DATE: OCT/19/2006 PAGE: 1 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP: 1203001152 Selection Guide Dice Part No. APED3528YC Iv (mcd) [2] @ 20mA Lens Type YELLOW (GaAsP/GaP) WATER CLEAR Viewing Angle [1] Min. Typ. 2θ1/2 7 20 40° Units Test Conditions Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity / luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. Max. λpeak Peak Wavelength Yellow 590 nm IF=20mA λD [1] Dominant Wavelength Yellow 588 nm IF=20mA Δλ1/2 Spectral Line Half-width Yellow 35 nm IF=20mA C Capacitance Yellow 20 pF VF=0V;f=1MHz VF [2] Forward Voltage Yellow 2.1 2.5 V IF=20mA IR Reverse Current Yellow 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Yellow Units Power dissipation 105 mW DC Forward Current 30 mA Peak Forward Current [1] 140 mA 5 V Reverse Voltage Operating / Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAD1060 REV NO: V.2 DATE: OCT/19/2006 PAGE: 2 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP: 1203001152 Super Bright Red APED3528YC SPEC NO: DSAD1060 REV NO: V.2 DATE: OCT/19/2006 PAGE: 3 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP: 1203001152 APED3528YC Recommended Soldering Pattern (Units : mm; Tolerance: ±0.1) Tape Specifications (Units : mm) SPEC NO: DSAD1060 REV NO: V.2 DATE: OCT/19/2006 PAGE: 4 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP: 1203001152 PACKING & LABEL SPECIFICATIONS APED3528YC SPEC NO: DSAD1060 REV NO: V.2 DATE: OCT/19/2006 PAGE: 5 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP: 1203001152