3.5x2.8 mm SMD CHIP LED LAMP APED3528MGC MEGA GREEN Features Description !SINGLE COLOR. The Mega Green source color devices are made ! SUITABLE with DH InGaAlP on GaAs substrate Light Emitting FOR ALL SMT ASSEMBLY AND SOLDER PROCESS. Diode. !IDEAL FOR BACKLIGHTING. ! AVAILABLE !PACKAGE ON TAPE AND REEL. : 500PCS / REEL. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.0079") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO:DSAD1065 APPROVED : J. Lu REV NO: V.1 CHECKED : Allen Liu DATE:MAR/18/2003 DRAWN: L.ZHANG PAGE: 1 OF 4 Selection Guide Par t No . Dic e APED3528MGC Iv (m c d ) @ 20 m A L en s Ty p e MEGA GREEN ( InGaAlP ) WATER CLEAR V i ew i n g An g l e Min . Ty p . 2θ1/2 70 25 0 40° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at T)=25°°C Sy m b o l Par am et er D ev i c e λpeak Peak Wavelength Mega Green λD Dominate Wavelength ∆λ 1/2 Ty p . Max . Un it s Tes t Co n d it io n s 574 nm I F =20mA Mega Green 568 nm I F =20mA Spectral Line Half-width Mega Green 26 nm I F =20mA C Capacitance Mega Green 20 pF V F =0V;f=1MHz VF Forward Voltage Mega Green 2.1 2.5 V I F =20mA IR Reverse Current Mega Green 10 uA V R = 5V Absolute Maximum Ratings at T)=25°°C P ar am e t e r Meg a Gr een Un it s Power dissipation 105 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA Reverse Voltage 5 V Operating/Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO:DSAD1065 APPROVED : J. Lu REV NO: V.1 CHECKED : Allen Liu DATE:MAR/18/2003 DRAWN: L.ZHANG PAGE: 2 OF 4 Mega Green SPEC NO:DSAD1065 APPROVED : J. Lu APED3528MGC REV NO: V.1 CHECKED : Allen Liu DATE:MAR/18/2003 DRAWN: L.ZHANG PAGE: 3 OF 4 APED3528MGC SMT Reflow Soldering Instructions Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process. Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO:DSAD1065 APPROVED : J. Lu REV NO: V.1 CHECKED : Allen Liu DATE:MAR/18/2003 DRAWN: L.ZHANG PAGE: 4 OF 4