KINGBRIGHT KP

1.6x0.8mm SMD CHIP LED LAMP
KP-1608MGC
Description
Features
! 1.6mmx0.8mm
!LOW
SMT LED, 1.1mm THICKNESS.
POWER CONSUMPTION.
! WIDE
! IDEAL
MEGA GREEN
The Mega Green source color devices are made with
DH InGaAlP on GaAs substrate Light Emitting Diode.
VIEWING ANGLE.
FOR BACKLIGHT AND INDICATOR.
! VARIOUS
COLORS AND LENS TYPES AVAILABLE.
!PACKAGE : 2000PCS / REEL.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.1(0.004") unless otherwise noted.
3. Lead spacing is measured where the lead emerge package.
4. Specifications are subject to change without notice.
SPEC NO: KDA0023
APPROVED: J.LU
REV NO: V.1
CHECKED:
DATE: SEP/04/2001
DRAWN: S. H. CHEN
PAGE: 1 OF4
Selection Guide
Par t No .
Di c e
KP-1608MGC
Iv (mc d )
@ 20 mA
L en s Ty p e
MEGA GREEN ( InGaAlP )
WATER CLEAR
View in g
An g l e
Min .
Ty p .
2θ1/2
20
50
120°
Note:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
Electrical / Optical Characteristics at T)=25°°C
Sy m b o l
Par ameter
Dev ic e
λpeak
Peak Wavelength
Mega Green
λD
Dominate Wavelength
∆λ1/2
Ty p .
Max .
Un i t s
Tes t Co n d itio n s
574
nm
IF=20mA
Mega Green
568
nm
IF=20mA
Spectral Line Halfwidth
Mega Green
26
nm
IF=20mA
C
Capacitance
Mega Green
20
pF
VF=0V;f=1MHz
VF
Forward Voltage
Mega Green
2.1
2.5
V
IF=20mA
IR
Reverse Current
Mega Green
10
uA
VR = 5V
Absolute Maximum Ratings at T)=25°°C
Par am et er
Me g a Gr e e n
Un its
Power dissipation
105
mW
DC Forward Current
30
mA
Peak Forward Current [1]
205
mA
Reverse Voltage
5
V
Operating Temperature
-40°C To +85°C
Storage Temperature
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: KDA0023
APPROVED: J.LU
REV NO: V.1
CHECKED:
DATE: SEP/04/2001
DRAWN: S. H. CHEN
PAGE: 2 OF4
Mega Green KP-1608MGC
SPEC NO: KDA0023
APPROVED: J.LU
REV NO: V.1
CHECKED:
DATE: SEP/04/2001
DRAWN: S. H. CHEN
PAGE: 3 OF4
KP-1608MGC
SMT Reflow Soldering Instructions
Number of reflow process shall be less than 2 times and cooling
process to normal temperature is required between first and
second soldering process.
Recommended Soldering Pattern
(Units : mm)
Tape Specifications
(Units : mm)
SPEC NO: KDA0023
APPROVED: J.LU
REV NO: V.1
CHECKED:
DATE: SEP/04/2001
DRAWN: S. H. CHEN
PAGE: 4 OF4