2.0x1.25mm SMD CHIP LED LAMP PRELIMINARY SPEC Part Number: APHBM2012SURKCGKC HYPER RED GREEN Description Features z2.0mmx1.25mm zBI SMT LED, 0.45mm MAX. THICKNESS. -COLOR, LOW POWER CONSUMPTION. zWIDE zIDEAL InGaAlP on GaAs substrate Light Emitting Diode. VIEWING ANGLE. The Green source color devices are made with InGaAlP on FOR BACKLIGHT AND INDICATOR. GaAs substrate Light Emitting Diode. zPACKAGE : 2000PCS / REEL. zMOISTURE zRoHS The Hyper Red source color devices are made with DH SENSITIVITY LEVEL : LEVEL 3. COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAG7623 REV NO: V.3 DATE: APR/26/2007 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: W.J.HUA ERP:1203005979 Selection Guide Dice Part No. Iv (mcd) [2] @ 20mA Lens Type Min. Typ. 70 200 36 80 HYPER RED (InGaAlP) APHBM2012SURKCGKC WATER CLEAR GREEN (InGaAIP) Viewing Angle [1] 2θ1/2 120° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous Intensity / Luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Hyper Red Green λD [1] Dominant Wavelength Δλ1/2 Typ. Max. Units Test Conditions 650 574 nm IF=20mA Hyper Red Green 635 570 nm IF=20mA Spectral Line Half-width Hyper Red Green 28 20 nm IF=20mA C Capacitance Hyper Red Green 35 15 pF VF=0V;f=1MHz VF [2] Forward Voltage Hyper Red Green 1.95 2.1 2.5 2.5 V IF=20mA IR Reverse Current Hyper Red Green 10 10 uA VR = 5V Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Hyper Red Green Units Power dissipation 75 75 mW DC Forward Current 30 30 mA Peak Forward Current [1] 185 150 mA 5 5 V Reverse Voltage Operating / Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAG7623 REV NO: V.3 DATE: APR/26/2007 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: W.J.HUA ERP:1203005979 APHBM2012SURKCGKC Hyper Red SPEC NO: DSAG7623 REV NO: V.3 DATE: APR/26/2007 PAGE: 3 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: W.J.HUA ERP:1203005979 Green SPEC NO: DSAG7623 REV NO: V.3 DATE: APR/26/2007 PAGE: 4 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: W.J.HUA ERP:1203005979 APHBM2012SURKCGKC Recommended Soldering Pattern (Units : mm; Tolerance: ±0.1) Tape Specifications (Units : mm) SPEC NO: DSAG7623 REV NO: V.3 DATE: APR/26/2007 PAGE: 5 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: W.J.HUA ERP:1203005979 PACKING & LABEL SPECIFICATIONS APHBM2012SURKCGKC SPEC NO: DSAG7623 REV NO: V.3 DATE: APR/26/2007 PAGE: 6 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: W.J.HUA ERP:1203005979