KINGBRIGHT APTF3216SURKCGKPBAC

3.2mm x 1.6mm FULL-COLOR SURFACE
MOUNT LED LAMP
Part Number: APTF3216SURKCGKPBAC
PRELIMINARY SPEC
ATTENTION
Hyper Red
Green
Blue
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Features
Description
z 3.2mmx1.6mm SMT LED, 0.75mm THICKNESS.
The Hyper Red source color devices are made with In-
z LOW POWER CONSUMPTION.
GaAlP on GaAs substrate Light Emitting Diode.
z ONE BLUE, ONE GREEN AND ONE RED CHIPS IN
The Green source color devices are made with InGaAlP on
ONE PACKAGE.
GaAs substrate Light Emitting Diode.
z CAN PRODUCE ANY COLOR IN VISIBLE SPEC-
The Blue source color devices are made with InGaN
TRUM, INCLUDING WHITE LIGHT.
on SiC Light Emitting Diode.
z PACKAGE : 2000PCS / REEL.
Static electricity and surge damage the LEDS.
z MOISTURE SENSITIVITY LEVEL : LEVEL 3.
It is recommended to use a wrist band or anti-electrostatic
z RoHS COMPLIANT.
glove when handling the LEDs.
All devices, equipment and machinery must be electrically
grounded.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.2(0.008") unless otherwise noted.
3. Specifications are subjected to change without notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAH7951
APPROVED: WYNEC
REV NO: V.1
CHECKED: Allen Liu
DATE: SEP/29/2007
DRAWN: C.WANG
PAGE: 1 OF 7
ERP: 1203007277
Selection Guide
Part No.
Dice
Iv (mcd) [2]
@ 20mA
Lens Type
Min.
Typ.
70
150
18
50
18
60
Hyper Red (InGaAlP)
APTF3216SURKCGKPBAC
WATER CLEAR
Green (InGaAlP)
Blue (InGaN)
Viewing
Angle [1]
2θ1/2
120°
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2. Luminous intensity/ luminous Flux: +/-15%.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Typ.
λpeak
Peak Wavelength
Hyper Red
Green
Blue
λD [1]
Dominant Wavelength
Δλ1/2
Max.
Units
Test Conditions
650
574
468
nm
IF=20mA
Hyper Red
Green
Blue
635
570
470
nm
IF=20mA
Spectral Line Half-width
Hyper Red
Green
Blue
28
20
21
nm
IF=20mA
C
Capacitance
Hyper Red
Green
Blue
35
15
100
pF
VF=0V;f=1MHz
VF [2]
Forward Voltage
Hyper Red
Green
Blue
1.95
2.1
3.2
2.5
2.5
4
V
IF=20mA
IR
Reverse Current
Hyper Red
Green
Blue
10
10
10
uA
VR=5V
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Absolute Maximum Ratings at TA=25°C
Parameter
Hyper Red
Green
Blue
Units
Power dissipation
75
75
120
mW
DC Forward Current
30
30
30
mA
Peak Forward Current [1]
185
150
100
mA
Reverse Voltage
5
Operating Temperature
-40°C To +85°C
Storage Temperature
-40°C To +85°C
V
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAH7951
APPROVED: WYNEC
REV NO: V.1
CHECKED: Allen Liu
DATE: SEP/29/2007
DRAWN: C.WANG
PAGE: 2 OF 7
ERP: 1203007277
APTF3216SURKCGKPBAC
Hyper Red
SPEC NO: DSAH7951
APPROVED: WYNEC
REV NO: V.1
CHECKED: Allen Liu
DATE: SEP/29/2007
DRAWN: C.WANG
PAGE: 3 OF 7
ERP: 1203007277
Green
SPEC NO: DSAH7951
APPROVED: WYNEC
REV NO: V.1
CHECKED: Allen Liu
DATE: SEP/29/2007
DRAWN: C.WANG
PAGE: 4 OF 7
ERP: 1203007277
Blue
SPEC NO: DSAH7951
APPROVED: WYNEC
REV NO: V.1
CHECKED: Allen Liu
DATE: SEP/29/2007
DRAWN: C.WANG
PAGE: 5 OF 7
ERP: 1203007277
APTF3216SURKCGKPBAC
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Tape Specifications
(Units : mm)
SPEC NO: DSAH7951
APPROVED: WYNEC
REV NO: V.1
CHECKED: Allen Liu
DATE: SEP/29/2007
DRAWN: C.WANG
PAGE: 6 OF 7
ERP: 1203007277
PACKING & LABEL SPECIFICATIONS
SPEC NO: DSAH7951
APPROVED: WYNEC
REV NO: V.1
CHECKED: Allen Liu
APTF3216SURKCGKPBAC
DATE: SEP/29/2007
DRAWN: C.WANG
PAGE: 7 OF 7
ERP: 1203007277