3.2mm x 1.6mm FULL-COLOR SURFACE MOUNT LED LAMP Part Number: APTF3216PBAVGASUK PRELIMINARY SPEC BLUE / GREEN ATTENTION HYPER RED OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z3.2mmx1.6mm SMT LED, 0.75mm THICKNESS. The Blue source color devices are made with InGaN on zLOW POWER CONSUMPTION. SiC Light Emitting Diode. zONE BULE , ONE GREEN AND ONE RED CHIPS IN The Green source color devices are made with InGaN on ONE PACKAGE. zCAN G-SiC Light Emitting Diode. PRODUCE ANY COLOR IN VISIBLE SPECTRUM, INCLUDING WHITE LIGHT. zPACKAGE : 2000PCS / REEL. zMOISTURE zRoHS The Hyper Red source color devices are made with DH InGaAlP on GaAs substrate Light Emitting Diode. Static electricity and surge damage the LEDS. SENSITIVITY LEVEL : LEVEL 3. COMPLIANT. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. Specifications are subjected to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAG5719 REV NO: V.4 DATE: APR/03/2007 PAGE: 1 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.J.LIU ERP:1203005399 Selection Guide Dice Part No. Iv (mcd) [2] @ 20mA Lens Type Min. Typ. 18 60 50 150 70 150 BLUE (InGaN) APTF3216PBAVGASUK WATER CLEAR GREEN (InGaN) HYPER RED (InGaAIP) Viewing Angle [1] 2θ1/2 120° Notes: 1.θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous Intensity / Luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Blue Green Hyper Red λD [1] Dominant Wavelength Δλ1/2 Typ. Max. Units Test Conditions 468 520 650 nm IF=20mA Blue Green Hyper Red 470 525 635 nm IF=20mA Spectral Line Half-width Blue Green Hyper Red 21 35 28 nm IF=20mA C Capacitance Blue Green Hyper Red 100 100 35 pF VF=0V;f=1MHz VF [2] Forward Voltage Blue Green Hyper Red 3.2 3.2 1.95 4.0 4.0 2.5 V IF=20mA IR Reverse Current Blue Green Hyper Red 10 10 10 uA VR= 5V Notes: 1.Wavelength: +/-1nm 2.Forward Voltage: +/-0.1V Absolute Maximum Ratings at TA=25°C Parameter Blue Green Hyper Red Units Power dissipation 120 120 75 mW DC Forward Current 30 30 30 mA Peak Forward Current [1] 100 100 185 mA Reverse Voltage 5 V -40°C To +85°C Operating / Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAG5719 REV NO: V.4 DATE: APR/03/2007 PAGE: 2 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.J.LIU ERP:1203005399 APTF3216PBAVGASUK Blue SPEC NO: DSAG5719 REV NO: V.4 DATE: APR/03/2007 PAGE: 3 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.J.LIU ERP:1203005399 Green SPEC NO: DSAG5719 REV NO: V.4 DATE: APR/03/2007 PAGE: 4 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.J.LIU ERP:1203005399 Hyper Red SPEC NO: DSAG5719 REV NO: V.4 DATE: APR/03/2007 PAGE: 5 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.J.LIU ERP:1203005399 APTF3216PBAVGASUK Recommended Soldering Pattern (Units : mm; Tolerance: ±0.1) Tape Specifications (Units : mm) SPEC NO: DSAG5719 REV NO: V.4 DATE: APR/03/2007 PAGE: 6 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.J.LIU ERP:1203005399 PACKING & LABEL SPECIFICATIONS APTF3216PBAVGASUK SPEC NO: DSAG5719 REV NO: V.4 DATE: APR/03/2007 PAGE: 7 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.J.LIU ERP:1203005399