Specifications

3.0mmx1.0mm RIGHT ANGLE SMD CHIP LED
LAMP
Part Number: APBA3010SURKCGKC-F01
Hyper Red
Green
Features
Description
z 3.0mmx1.0mm RIGHT ANGLE SMT LED, 2.0mm
The Hyper Red source color devices are made with DH
THICKNESS.
InGaAlP on GaAs substrate Light Emitting Diode.
z LOW POWER CONSUMPTION.
The Green source color devices are made with InGaAlP on
z WIDE VIEWING ANGLE.
GaAs substrate Light Emitting Diode.
z IDEAL FOR BACKLIGHT AND INDICATOR.
z VARIOUS COLORS AND LENS TYPES AVAILABLE.
z PACKAGE : 2000PCS / REEL.
z MOISTURE SENSITIVITY LEVEL : LEVEL 3.
z RoHS COMPLIANT.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.15(0.006") unless otherwise noted.
3. Specifications are subject to change without notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAF6333
APPROVED: WYNEC
REV NO: V.3
CHECKED: Allen Liu
DATE: JUN/08/2007
PAGE: 1 OF 6
DRAWN: Z.Z.YANG
ERP: 1203000840
Selection Guide
Part No.
Dice
Iv (mcd) [2]
@ 20mA
Lens Type
Hyper Red (InGaAlP)
APBA3010SURKCGKC-F01
Min.
Typ.
110
200
18
50
Viewing
Angle [1]
2θ1/2
140°
WATER CLEAR
Green (InGaAlP)
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2. Luminous intensity/ luminous Flux: +/-15%.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Typ.
λpeak
Peak Wavelength
Hyper Red
Green
λD [1]
Dominant Wavelength
Δλ1/2
Max.
Units
Test Conditions
650
574
nm
IF=20mA
Hyper Red
Green
635
570
nm
IF=20mA
Spectral Line Half-width
Hyper Red
Green
28
20
nm
IF=20mA
C
Capacitance
Hyper Red
Green
35
15
pF
VF=0V;f=1MHz
VF [2]
Forward Voltage
Hyper Red
Green
1.95
2.1
2.5
2.5
V
IF=20mA
IR
Reverse Current
Hyper Red
Green
10
10
uA
VR = 5V
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Absolute Maximum Ratings at TA=25°C
Parameter
Hyper Red
Green
Units
Power dissipation
75
75
mW
DC Forward Current
30
30
mA
Peak Forward Current [1]
185
150
mA
Reverse Voltage
5
Operating Temperature
-40°C To +85°C
Storage Temperature
-40°C To +85°C
V
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAF6333
APPROVED: WYNEC
REV NO: V.3
CHECKED: Allen Liu
DATE: JUN/08/2007
PAGE: 2 OF 6
DRAWN: Z.Z.YANG
ERP: 1203000840
APBA3010SURKCGKC-F01
Hyper Red
SPEC NO: DSAF6333
APPROVED: WYNEC
REV NO: V.3
CHECKED: Allen Liu
DATE: JUN/08/2007
PAGE: 3 OF 6
DRAWN: Z.Z.YANG
ERP: 1203000840
Green
SPEC NO: DSAF6333
APPROVED: WYNEC
REV NO: V.3
CHECKED: Allen Liu
DATE: JUN/08/2007
PAGE: 4 OF 6
DRAWN: Z.Z.YANG
ERP: 1203000840
APBA3010SURKCGKC-F01
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Tape Specifications
(Units : mm)
SPEC NO: DSAF6333
APPROVED: WYNEC
REV NO: V.3
CHECKED: Allen Liu
DATE: JUN/08/2007
PAGE: 5 OF 6
DRAWN: Z.Z.YANG
ERP: 1203000840
PACKING & LABEL SPECIFICATIONS
SPEC NO: DSAF6333
APPROVED: WYNEC
REV NO: V.3
CHECKED: Allen Liu
APBA3010SURKCGKC-F01
DATE: JUN/08/2007
PAGE: 6 OF 6
DRAWN: Z.Z.YANG
ERP: 1203000840