3.2x2.4mm SMD CHIP LED LAMP Part Number: APBD3224SURKCGKC-F01 Hyper Red Green Description Features z 3.2x2.4mm SMT LED, 2.4mm THICKNESS. z LOW POWER CONSUMPTION. z IDEAL FOR BACKLIGHT AND INDICATOR. The Hyper Red source color devices are made with DH InGaAlP on GaAs substrate Light Emitting Diode. The Green source color devices are made with InGaAlP on GaAs substrate Light Emitting Diode. z VARIOUS COLORS AND LENS TYPES AVAILABLE. z PACKAGE : 1500PCS / REEL. z MOISTURE SENSITIVITY LEVEL : LEVEL 3. z RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAH3731 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: APR/27/2007 DRAWN: Y.L.LI PAGE: 1 OF 6 ERP: 1203000875 Selection Guide Part No. Dice APBD3224SURKCGKC-F01 Iv (mcd) [2] @ 20mA Lens Type Hyper Red (InGaAlP) WATER CLEAR Green (InGaAlP) Min. Typ. 380 800 110 300 Viewing Angle [1] 2θ1/2 20° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Hyper Red Green λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 650 574 nm IF=20mA Hyper Red Green 635 570 nm IF=20mA Spectral Line Half-width Hyper Red Green 28 20 nm IF=20mA C Capacitance Hyper Red Green 35 15 pF VF=0V;f=1MHz VF [2] Forward Voltage Hyper Red Green 1.95 2.1 2.5 2.5 V IF=20mA IR Reverse Current Hyper Red Green 10 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Hyper Red Green Units Power dissipation 75 75 mW DC Forward Current 30 30 mA Peak Forward Current [1] 185 150 mA Reverse Voltage 5 Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C V Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAH3731 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: APR/27/2007 DRAWN: Y.L.LI PAGE: 2 OF 6 ERP: 1203000875 APBD3224SURKCGKC-F01 Hyper Red SPEC NO: DSAH3731 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: APR/27/2007 DRAWN: Y.L.LI PAGE: 3 OF 6 ERP: 1203000875 Green SPEC NO: DSAH3731 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: APR/27/2007 DRAWN: Y.L.LI PAGE: 4 OF 6 ERP: 1203000875 APBD3224SURKCGKC-F01 Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAH3731 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: APR/27/2007 DRAWN: Y.L.LI PAGE: 5 OF 6 ERP: 1203000875 PACKING & LABEL SPECIFICATIONS SPEC NO: DSAH3731 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu APBD3224SURKCGKC-F01 DATE: APR/27/2007 DRAWN: Y.L.LI PAGE: 6 OF 6 ERP: 1203000875