KINGBRIGHT APHK1608SEC

1.6x0.8mm SMD CHIP LED LAMP
Part Number: APHK1608SEC
SUPER BRIGHT ORANGE
Features
Description
●1.6mmx0.8mm SMT LED, 0.7mm THICKNESS.
The Super Bright Orange device is made with DH
●LOW POWER CONSUMPTION.
InGaAlP (on GaAs substrate) light emitting diode chip.
●WIDE VIEWING ANGLE.
●IDEAL FOR BACK LIGHT AND INDICATOR.
●VARIOUS COLORS AND LENS TYPES AVAILABLE.
●MOISTURE SENSITIVITY LEVEL : LEVEL 4.
●PACKAGE : 2000PCS / REEL.
●RoHS COMPLIANT.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.1(0.004") unless otherwise noted.
3.Specifications are subject to change without notice.
SPEC NO: DSAD1113
REV NO: V.4
DATE: NOV/06/2006
PAGE: 1 OF 5
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: H.Q.YUAN
ERP:1204000046
Selection Guide
Dice
Part No.
APHK1608SEC
Iv (mcd) [2]
@ 20mA
Lens Type
SUPER BRIGHT ORANGE (InGaAlP)
WATER CLEAR
Viewing
Angle [1]
Min.
Typ.
2 θ 1/2
110
280
90°
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2. Luminous intensity/ luminous Flux: +/-15%.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Typ.
λpeak
Peak Wavelength
Super Bright Orange
λD [1]
Dominant Wavelength
Δλ1/2
Max.
Units
Test Conditions
610
nm
IF=20mA
Super Bright Orange
601
nm
IF=20mA
Spectral Line Half-width
Super Bright Orange
29
nm
IF=20mA
C
Capacitance
Super Bright Orange
30
pF
VF=0V;f=1MHz
VF [2]
Forward Voltage
Super Bright Orange
2.0
2.5
V
IF=20mA
IR
Reverse Current
Super Bright Orange
10
uA
VR= 5V
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Absolute Maximum Ratings at TA=25°C
Parameter
Super Bright Orange
Units
Power dissipation
75
mW
DC Forward Current
30
mA
Peak Forward Current [1]
195
mA
Reverse Voltage
5
V
Operating / Storage Temperature
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAD1113
REV NO: V.4
DATE: NOV/06/2006
PAGE: 2 OF 5
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: H.Q.YUAN
ERP:1204000046
Super Bright Orange
APHK1608SEC
SPEC NO: DSAD1113
REV NO: V.4
DATE: NOV/06/2006
PAGE: 3 OF 5
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: H.Q.YUAN
ERP:1204000046
APHK1608SEC
Recommended Soldering Pattern
(Units: mm ; Tolerance: ± 0.1)
Tape Specifications
(Units : mm)
SPEC NO: DSAD1113
REV NO: V.4
DATE: NOV/06/2006
PAGE: 4 OF 5
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: H.Q.YUAN
ERP:1204000046
PACKING & LABEL SPECIFICATIONS
APHK1608SEC
SPEC NO: DSAD1113
REV NO: V.4
DATE: NOV/06/2006
PAGE: 5 OF 5
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: H.Q.YUAN
ERP:1204000046