3.2x1.6mm SMD CHIP LED LAMP P/N: APTD3216SYC Features SUPER BRIGHT YELLOW Description 3.2mmX1.6mm SMT LED, 1.8mm THICKNESS. The Super Bright Yellow device is made with DH LOW POWER CONSUMPTION. InGaAlP (on GaAs substrate) light emitting diode chip. WIDE VIEWING ANGLE. IDEAL FOR BACKLIGHT AND INDICATOR. VARIOUS COLORS AND LENS TYPES AVAILABLE. MOISTURE SENSITIVITY LEVEL : LEVEL 3. PACKAGE: 2000PCS / REEL . RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.0079") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAD1049 REV NO: V.6 DATE: APR/29/2006 PAGE: 1 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: H.Q.YUAN ERP:1203002308 Selection Guide Part No. Dice APTD3216SYC Iv (mcd) [2] @ 20mA Lens Type SUPER BRIGHT YELLOW (InGaAIP) WATER CLEAR Viewing Angle [1] Min. Typ. 2θ θ1/2 110 300 50° Notes: 1.θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Units Test Conditions λpeak Peak Wavelength Super Bright Yellow Device Typ. 590 Max. nm IF=20mA λD[1] Dominant Wavelength Super Bright Yellow 588 nm IF=20mA ∆λ1/2 Spectral Line Half-width Super Bright Yellow 28 nm IF=20mA C Capacitance Super Bright Yellow 25 pF VF=0V;f=1MHz VF[2] Forward Voltage Super Bright Yellow 2.0 2.5 V IF=20mA IR Reverse Current Super Bright Yellow 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Super Bright Yellow Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA 5 V Reverse Voltage Operating/Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAD1049 REV NO: V.6 DATE: APR/29/2006 PAGE: 2 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: H.Q.YUAN ERP:1203002308 Super Bright Yellow APTD3216SYC SPEC NO: DSAD1049 REV NO: V.6 DATE: APR/29/2006 PAGE: 3 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: H.Q.YUAN ERP:1203002308 APTD3216SYC Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) Note: Tolerance is ±0.25 unless otherwise noted. SPEC NO: DSAD1049 REV NO: V.6 DATE: APR/29/2006 PAGE: 4 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: H.Q.YUAN ERP:1203002308 PACKING & LABEL SPECIFICATIONS APTD3216SYC SPEC NO: DSAD1049 REV NO: V.6 DATE: APR/29/2006 PAGE: 5 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: H.Q.YUAN ERP:1203002308