2.1x0.7mm RIGHT ANGLE SMD CHIP LED LAMP ATTENTION Part Number: APJA2107PBC/A BLUE OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description 2.1mmx0.7mm RIGHT ANGLE SMT LED, 1.3mm The Blue source color devices are made with InGaN on SiC THICKNESS. Light Emitting Diode. LOW POWER CONSUMPTION. Static electricity and surge damage the LEDS. WIDE VIEWING ANGLE. It is recommended to use a wrist band or anti-electrostatic IDEAL FOR BACKLIGHT AND INDICATOR. glove when handling the LEDs. VARIOUS COLORS AND LENS TYPES AVAILABLE. All devices, equipment and machinery must be electrically PACKAGE : 2000PCS / REEL. grounded. MOISTURE SENSITIVITY LEVEL : LEVEL 3. RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.15(0.006") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAG3309 REV NO: V.2 DATE: JUN/12/2006 PAGE: 1 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP:1203004175 Selection Guide Part No. Dice APJA2107PBC/A Iv (mcd) [2] @ 20 mA Lens Type BLUE (InGaN) Viewing Angle [1] Min. Typ. 2θ θ1/2 18 60 120° WATER CLEAR Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous Intensity / Luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Blue λD [1] Dominant Wavelength ∆λ1/2 Typ. Max. Units Test Conditions 468 nm IF=20mA Blue 470 nm IF=20mA Spectral Line Half-width Blue 21 nm IF=20mA C Capacitance Blue 100 pF VF=0V;f=1MHz VF [2] Forward Voltage Blue 3.3 3.8 V IF=20mA IR Reverse Current Blue 10 uA VR = 5V Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Blue Units Power dissipation 114 mW DC Forward Current 30 mA Peak Forward Current [1] 100 mA 5 V Reverse Voltage Operating/Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAG3309 REV NO: V.2 DATE: JUN/12/2006 PAGE: 2 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP:1203004175 Blue APJA2107PBC/A SPEC NO: DSAG3309 REV NO: V.2 DATE: JUN/12/2006 PAGE: 3 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP:1203004175 APJA2107PBC/A Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAG3309 REV NO: V.2 DATE: JUN/12/2006 PAGE: 4 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP:1203004175 PACKING & LABEL SPECIFICATIONS APJA2107PBC/A SPEC NO: DSAG3309 REV NO: V.2 DATE: JUN/12/2006 PAGE: 5 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP:1203004175